Categories

Best Servo To Wifi Converter Board

Dorhea 10PCS ESP8266 WiFi Development Internet Board NodeMCU LUA 4M Flash Serial Wireless Module CH340 Serial WiFi WLAN Communication Compatible with Ardui no IDE/Micropython

  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime..
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
  • Smart hardwares easily, if you want to do some remote control projects, the cheap but useful NodeMCU board can help you. the embedded MCU and wifi functions let us be able to remotely control our hardwares..
  • DIY a smart car: If together with the motor or servo extension board, one can diy a smart robot, e.g., rc car, tank chassis..
Check Stock

Wireless M.2 NGFF WiFi BT Card to Desktop PC PCI-E Network Adapter Converter for Intel 3160NGW 7260NGW 8260NGW 9260NGW AX200NGW AX210NGW Killer WiFi 6 AX1650 Card Only PCI-E Adapter No WiFi Card

  • Only and converter for NGFF M.2 wifi card (not including wifi card), Wireless card not included in this package( please make sure the interface of....
  • This is a converter for NGFF to PCI-E interface, not a desktop wifi card. The M.2 Card is designed for wireless application on desktop PCI-E adapter....
  • Supports AMD and Intel Motherboard computer. And you can insert your USB type M.2 card to this adapter then plug to the USB 9pin header port through a....
  • The Bluetooth cable is including in this package, If the wifi card which you installed inside this converter has BT 5.0 4.0 3.0 2.0 function, it will....
  • Please make sure the wifi card which installed this converter will not have a compatible problem with your desktop system and please install the right....
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

  • Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
  • Abundant quantity and diverse styles that can meet your various needs.
  • Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
  • Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
  • Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
  • The interior is made of tinned copper, which has a good transmission and low resistance.
  • Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.
Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

  • 3-Pin JR plug male to male connector servo extension lead wire cable..
  • There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
  • Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
  • Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..
Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

fenvi M.2 NGFF WiFi Wireless Network Card to PCIe 1X Desktop Adapter Converter Converter only!!Not Including WiFi Card for NGFF Intel 7260 8260 3160 9260 AX200 AX210 Killer WiFi 6 AX1650 Card

  • Only and converter for NGFF M.2 wifi card (not incluiding wifi card), Wireless card not including in this package( please make sure the interface of....
  • This is an converter for NGFF to PCI-E interface,not desktop wifi card.The PCI-E M.2 Card passive adapter is designed for wireless application on....
  • You can insert your USB type M.2 card to this adapter then plug to USB 9pin header port through USB cable. Or insert your PCI-E type M.2 card into....
  • The bluetooth cable is inlcuding in this package, If the wifi card which you installed inside this converter has Bluetooth 5.0 4.0 3.0 2.0 function,....
Check Stock

VA-800-WiFi Bundle Vividia AbleScope VA-800 USB Flexible Articulating Borescope Plus VA-B2 WiFi AirBox for iPad iPhone and Android

  • Include bundle of VA-800 borescope and VA-B2 WiFi AirBox..
  • Vividia Ablescope VA-800 Flexible USB Articulating Borescope Inspection Camera: With OTG cable included, VA-800 can be used with selective Android....
  • Vividia Ablescope VA-B2 WiFi AirBox Converter for iPhone iPad: This WiFi converter box can transform the Vividia Ablescope video signals into a WiFi....
  • You can use iPad, iPhone and Android phones and tablets to preview, take pictures and record videos with our free APP, "AirBox - Vididia Ablescope".....
  • Package includes: VA-800 Flexible Borescope, VA-B2 WiFi AirBox, 5 pcs Rubber Sleeve, Aluminum Sleeve-Changing Tool, OTG cable, Plastic Toolbox..
Check Stock

VA-980-WiFi Bundle Vividia AbleScope VA-980 USB Semi-Flexible Articulating Borescope Plus VA-B2 WiFi AirBox for iPad iPhone and Android

  • Include bundle of VA-980 borescope and VA-B2 WiFi AirBox..
  • Vividia Ablescope VA-980 Semi-Flexible USB Articulating Borescope Inspection Camera: With OTG cable included, VA-980 can be used with selective....
  • Vividia Ablescope VA-B2 WiFi AirBox Converter for iPhone iPad: This WiFi converter box can transform the Vividia Ablescope video signals into a WiFi....
  • You can use iPad, iPhone and Android phones and tablets to preview, take pictures and record videos with our free APP, "AirBox - Vididia Ablescope".....
  • Package includes: VA-980 Semi-Flexible Borescope, VA-B2 WiFi AirBox, 5 pcs Rubber Sleeve, Aluminum Sleeve-Changing Tool, OTG cable, Plastic Toolbox..
Check Stock

VA-400-WiFi Bundle Vividia Ablescope VA-400 USB Rigid Articulating Borescope Plus W03A WiFi Box for iOS Tablets iPhone and Android Phone and Tablet

  • This bundle includes: VA-400 borescope and W03A WiFi AirBox..
  • Vividia Ablescope VA-400 Rigid USB Articulating Borescope Inspection Camera: With OTG cable included, VA-400 can be used with selective Android....
  • Vividia Ablescope W03A WiFi AirBox Converter for iPhone iOS tablets: This WiFi converter box can transform the Vividia Ablescope video signals into a....
  • You can use iOS tablet, iPhone and Android phones and tablets to preview, take pictures and record videos with our free APP, "WiFi Image". You can....
  • Package includes: VA-400 Rigid Borescope, W03A WiFi Box, Aluminum Sleeve-Changing Tool if needed, OTG cable, Aluminum Toolbox, Rubber Sleeves for....
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

OSOYOO Robot Car Starter Kit for R3 | STEM Remote Controlled Educational Motorized Robotics for Building Programming Learning How to Code | IOT Mechanical DIY Coding for Teens Adults

  • ...programming, coding, electronics and robotics experience..
  • This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: Basic Board, USB Cable, Model X Motor Driver Module, WiFi Shield, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 5 Line Tracking Modules, 2 Obstacle Sensors, Buzzer Sensor Module, Infrared IR Remote, Receiver, & Transmitter, Battery Box, battery and charger, Voltage Meter, 2 Piece Acrylic Car Chassis, 4 Motors & Metal Motor Holders, 4 Wheels.
  • MORE THAN THE BASICS: ADDITIONAL ACCESSORIES INCLUDED IN DIY ROBOTIC STEM SET — 2 8-Pin Female to Female Jumper Wires (20 cm), 2 20-Pin Male to Female Jumpers (20 cm), 1 Male to 5 Female Jumper Wire, 3-Pin Female to Female Jumper, 6 Pin Male to Female Jumper, Screws & Nuts for Sensor and Module Assembly, Philips Screwdriver, Basic Tutorial CD with Video, Pictures, Sample Project Code, & Step-by-Step Instructions. Designed for Easy Assembly and Great Performance.
  • OSOYOO Robot Car Kit for Arduino is a perfect gift for your Children who are interested in programming, robotics, electronics, or mechani....
Check Stock