Categories

Best Servo Voltage Stabilizers

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

  • 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
  • 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and More

  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

AGFRC 100KG High-Torque 1/5-Scale RC-Servo-Motor - 12V Waterproof Metal Gear Brushless Servo for 1/5 RC Models, Control Angle 180° (A280BVSW(3S/4S))

  • 3S / 4S LiPo Direct Connection - 1/5 scale high torque servo is with 3S / 4S LiPo high voltage application, available to connect with 3S / 4S LiPo battery directly without BEC. Ideal for 1/5 scale buggy, monster trucks, RC car, crawler, boat, plane, helicopter, on road, off road, etc..
  • IP67 Waterproof Design - Stable, low noise, dust-proof, advanced linearity and accuracy. With IP67 waterproof design, which makes servo still work normally when immersed up to 1 Meter depth of 30 minutes. Size: 65.8*30.0*59.0mm (2.59 x 1.18 x 2.32 in).
  • High Precision & Monster Torque - AGFRC 1/5 scale giant steering digital servo motor uses high-precision production technology to improve product tightness. The maximum torque of this HV servo is up to 125kg - cm (1738 oz-in) @ 16.0V and speed up to 0.080sec / 60° @ 16.0V..
  • High Quality & Performance - Waterproof 100KG high torque metal gear servo equipped with patent reinforced steel gear with pins, five ball bearings, full CNC Aluminium housing with groove surface for fast heat dissipation, accuracy with precision magnet angle sensor..
  • Satisfied Customer Service - Please read the detail description of this waterproof brushless servo first, if any ideas about our servo, contact us first & we will provide you a better solut....
Check Stock

JX CLS6336HV 35kg Aluminium Shell Metal Gear High Voltage Coreless Digital Servo for RC Models Helicopter Accs

  • JX ecoboost Servo CLS6322HV high voltage coreless digital servo..
  • High-performance digital standard servo, high-precision and high-precision metal steering gear..
  • Double ball bearings, high torque of 21 kg-cm..
Check Stock

ETMall 6PCS MG996R Servo Motor Metal Gear Servo Motor Torque Digital Servo Motor High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Compatible Arduino Raspberry Pi Project

  • WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • 6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
  • STABLEPERFORMANCE：Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
  • Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..
Check Stock

Dilwe RC Car Servo,Durable Plastic Gear Servo for WLtoys 12428 / 12427 1/12 RC Car Upgrade Spare Parts

  • ✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
  • ✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
  • ✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
  • ✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
  • ✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
  • Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.
Check Stock