Categories

Best Setscrew Shaft Collar

Climax Metal C-125-BO Shaft Collar, One Piece, Set Screw Style, Black Oxide Plating, Steel, 1-1/4\ Bore, 2\ OD, 11/16\ Width, With 3/8-16 x 3/8 Set Screw

  • Setscrew shaft collar for applications supporting low axial loads and simple positioning.
  • Effective on shafts made of softer material than the setscrew material.
  • Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion.
  • Includes a socket setscrew for securing the collar onto the shaft.
  • Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F).
Check Stock

Climax Metal C-150-BO Shaft Collar, One Piece, Set Screw Style, Black Oxide Plating, Steel, 1-1/2\ Bore, 2-1/4\ OD, 3/4\ Width, With 3/8-16 x 3/8 Set Screw

  • Setscrew shaft collar for applications supporting low axial loads and simple positioning.
  • Effective on shafts made of softer material than the setscrew material.
  • Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion.
  • Includes a socket setscrew for securing the collar onto the shaft.
  • Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F).
Check Stock

Climax Metal LC-062 Steel Set Screw Collar, Lightweight Zinc Plating, 5/8\ Bore Size, 1\ OD, With 1/4-20 x 3/16 Set Screw

  • Setscrew shaft collar for applications supporting low axial loads and simple positioning.
  • Lightweight design for limited-space applications.
  • Steel for weldability and rust resistance with zinc plating for better resistance to corrosion than black oxide steel.
  • Includes a socket setscrew for securing the collar onto the shaft.
  • Operating temperatures range from -17 to 121 degrees C (0 to 250 degrees F).
Check Stock

Climax Metal CRC-025-S Shaft Collar, One Piece, Set Screw Style, 316 Stainless Steel, 1/4\ Bore, 1/2\ OD, 5/16\ Width, With 10-32 x 1/8 Set Screw

  • Setscrew shaft collar for applications supporting low axial loads and simple positioning.
  • Corrosion-resistant design for applications involving harsh environments or frequent washdowns.
  • Stainless steel 316 for greater corrosion resistance than steel or stainless steel 303.
  • Includes a socket setscrew for securing the collar onto the shaft.
  • Operating temperatures range from -40 to 426 degrees C (-40 to 800 degrees F).
Check Stock

Jeremywell 1-3/4\ Bore Double Split Shaft Collar Black Oxide Set Screw Style (4 PCS)

  • Free Shipping within the Continental United States.
  • Same business day order processing before 12:30PM PDT.
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount, Accurately and firmly fit, It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
Check Stock

Jeremywell 1-3/4\ Bore Double Split Shaft Collar Black Oxide Set Screw Style (2 PCS)

  • Free Shipping within the Continental United States.
  • Same business day order processing before 12:30PM PDT.
  • Corrosion resistance (Black oxide painting ) Applicable to both soft or hard shaft material, Easy to mount, Accurately and firmly fit, It is a two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
Check Stock

Climax Metal H2C-300 Recessed Screw Clamping Collar, Two Piece, Black Oxide Plating, Steel, 3\ Bore Size, 4-1/2\ OD, With 3/8-24 x 1 1/4 Set Screw

  • Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars.
  • Recessed screw head provides an exterior profile free of major projections for increased safety.
  • Steel for weldability and rust resistance with a black oxide finish for a decorative appearance and for resistance to stick-slip, white corrosion, and abrasion.
  • Includes socket-head cap screws for securing the collar onto the shaft.
  • Operating temperatures range from -17 to 148 degrees C (0 to 300 degrees F).
Check Stock

UCT202-010T NTN New Ball Bearing Take Up

  • Take-up block with spherical roller bearing insert for use with a Rexnord center pull frame.
  • Cast-iron housing and self-aligning steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing take-up block for maximum strength and rigidity.
  • Fixed-type bearing with a single setscrew locking collar for secure attachment to a cylindrical shaft.
  • Metal clearance seal for no speed or temperature limitations, and no frictional drag.
Check Stock

Sydien 2Pcs Two-Piece Clamping Collar Set Style Double Split Shaft Collar 5/16\ Bore, 63/64\ OD

  • Bore Diameter:5/16" ,Outside Diameter: 63/64"..
  • Easily installed where major disassembly would otherwise be required..
  • Two piece clamp on collars come apart in two halves for easy installation and maintenance..
  • Two-piece clamping shaft collar for applications requiring a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars..
Check Stock

dophee Drill Stop Bit Collar Set 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 Adjustable Drill Depth Stop Collar Limit Ring with Allen Wrench Set for Drill Bits Consistent Drilling

  • SPECS: Assorted Sizes: 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in., 5/8 in.and an Allen Wrench. Hex shank Diameter: 2.5mm..
  • MATERIAL:The Durable Alloy Steel Setscrew Type Collar will stay sturdy when tightened and is specially designed not to damage the bits..
  • USES: Bit Limit Rings are used as a Shaft Collar on machinery and can be used on twist drill bits or brad point drills or any type of bit to prevent....
  • FUNCTION: The Drixet Drill Stop Bit Collar Set will quickly and easily help you drill holes to exact depths and are ideal for production work and....
  • PACKAGE INCLUDES: Drill stop collar set(8Pcs) with 1Pc Allen Wrench..
Check Stock

Industrial Black Metal Furniture Legs,Black Cast Iron Table Legs,RetroHeavy Duty Square Tube Desk Legs,Metal Dining Coffee Work Table Bench Furniture Legs,Set of 2

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

2 Set 8pcs Stainless Steel Drill Depth Stop Collar Silver for Wood Drill bit Set Adjustable Collar Depth Stop Bit 3mm 4mm 5mm 6mm 8mm 10mm 14mm 16mm with Two Key Hexagonal Set Stainless Steel XSFDUI

  • SPECS: Assorted Sizes: 1/8 in., 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in., 5/8 in and an Alan Key Wrench.
  • PACKAG: Drill depth stop collar comes with a separate transparent plastic packaging box, which is convenient for storage and will not lose small parts.
  • MATERIAL: : Upgraded version, stainless steel material, more textured, durable, not rusty.
  • QUALITY: The stainless steel Steel Setscrew Type Collar will stay sturdy when tightened and is specially designed not to damage the bits.
  • USES: Bit Limit Rings are used as a Shaft Collar on machinery and can be used on twist drill bits or brad point drills or any type of bit to prevent excessive drill bit penetration and for any job that uses a bit and needs precision.
Check Stock

Sealmaster NP-27 Pillow Block Ball Bearing Non-Expansion Type Normal-Duty Regreasable Setscrew Locking Collar Felt Seals Cast Iron Housing 1-11/16 Bore 2-1/8 Base to Center Height 5-3/4 Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock