Best Sewage Flow Meter

Horiba 9096001700 Plastic Body PH Electrode

Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..

Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..

Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6000 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

Great Performance: 1/2 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift water up to 27ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10' power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
Wide Applications: Designed for residential and co....

Check Stock

Acquaer 1/2HP Submersible Sewage/Effluent Pump, 6000 GPH, Cast Iron, Automatic Tethered Float Switch, 115V Sump Pump for Septic Tank, Residential Sewage, Basement, 2” NPT Discharge

Great Performance: 1/2 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift water up to 27ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10′ power cord with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2” NPT discharge, capable of passing 2″ diameter solids. As a waterproof effluent pump, it’s ideal for basements or below grade installations.
Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter.
Wide Applications: Designed for residential....

Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

Acquaer 3/4HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6400 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

Great Performance: 3/4 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6400 GPH or lift water up to 29ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life.
Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10' power cords with piggy-back plug allow automatic operation of this electric sewage pump. DO NOT lift the pump by the power cord or it will be damaged permanently.
Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and 2'' NPT discharge, capable of passing 2" diameter solids. As a waterproof effluent pump, it's ideal for basements or below grade installations.
Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automa....

Check Stock

Portable Toilet for Camping with Bag, 5.3 Gallon Rv Toilet with Powerful Bump Flushing, Outdoor Toilet with Anti-leak Seal Ring for Hiking/Boat/Camping/Travle

...). 4.8kg/10.5lbs net weight, not bulky and easy to carry.
Medium size with 14.5"(L) x 16.5" (W) x 17"(H), sufficient enough for children or adults. It can also be portable and stored in the storage bag, which is included in the package..
【8.5GALLON WATER TANK】Removable water tank design of clean water bucket and sewage bucket, which has super large capacity of total 8.5 gallons. 3.2 gallon water bucket, which can provide more than 100 flushes once filled(each pump has about 0.032 gallons of water). 5.3 gallons super large sewage tank, effectively reduce the number of emptying, do not have to dump frequently, bring convenience to your journey and use..
【POWERFUL WATER FLUSHING】Different from the water outlet method of ordinary outdoor toilets. Our RUNWIN toilet controls the water output through a hand pump. The water will form a spiral flow in the box to outlet, which provide you with more pressure and stronger water flow. Therefore, it has stronger cleaning ability than other toilets, and can remove stains in the bucket more effectively. In addition, the package contains a spray gun that can help you clean all the inner corners of the toilet..
【EXCELLENT LEAKPROOF PERFORMANCE】The camper toilet is divided into two parts. Each part has a separ....

Check Stock

STEALTH Air Tank, 10 gallon High Pressure Air Tank with Maximum 225Psi Pressure, Ideal For Inflation Jobs, Blue-Saa-110T

▲【POWERFUL PERFORMANCE】Large capacity with10 gallon ,high pressure maximum 225psi pressure to provide strong motivation for your tools, Configured 4pcs quick coupler simultaneously meet multiple tools different needs at work.
▲【PRECISE GAUGE】With tank and tool gauges dual meter ,Design the display up ward facing gauge ,makes reading the gauge easy and convenient.
▲【EXCELLENT DESIGN】Integrated tank welding machine design bringing ultra-high use safety ,The sewage outlet design can discharge sewage and increase the service use life.
▲【EASY AND SAFE MOVE 】Saa-110T air tank the weight only 40.8lbs easy to move,Both the handle and the bottom bracket are made of non-slip design to ensure the stability of the device during use.
▲【WHAT YOU WILL GET】Air tank x 1 User manual x 1, Lifetime warranty committed by our friendly and quick-response customer service.

Check Stock

RecPro RV Water Pump 3.0 GPM | 12V Water Pump | Self-Prime | Camper Water Pump | RV Plumbing | Optional Strainer (1 Pump, With 1 RecPro Strainer)

...nute Flow, 45 LPM Flow Rate, 15 PSI pressure setting, 12V DC Voltage RV Waste Pump, Pump lift up to 9.8 feet. Connects to standard 3" RV waste outlet. (If the size of the sewer outlet is inconsistent, you need to buy a Sewer Hose Adapter to complete the connection).
✅Wide Compatibility - The RYANSANS's DC electric sewage pump has a double-blade mashing function, the motor has a built-in temperature control protection switch, low power consumption, high performance, low noise, and is widely used in RV sewage, medical wastewater, domestic sewage, garbage treatment, etc. It is simple and convenient to operate, run smoothly..
✅Product Function - The macerator pump is used in conjunction with your piping system to crush solid waste for easier pumping and more effective resistance to gravity. The motor is slightly waterproof, so you don’t need to worry too much about splashing a little water (you can wipe it dry), but it is strictly forbidden to soak the pump motor in water..
✅Operation Guide - When you stop using it, you only need to turn off the faucet at the water outlet. The pump has a pressure switch to automatically start and stop. The next time you use it, you only need to turn on the faucet to work normally..

Check Stock

Acquaer 1/3 HP Submersible Sump Pump,3150 GPH Cast Iron Sewage/Effluent Pump with Integrated Snap-action Float Switch for Septic Tank,Basement,Flooding Area

【POWERFUL SEWAGE PUMP】Voltage:115V/60Hz.
【AUTO/MANUAL OPERATION】 With integral snap-action float switch for automatic operation.
Activates when water reaches float switch,auto off when water drops down. Automatic work, no need to manually start..
【BUILT-IN OVERLOAD PROTECTION 】 Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor..
【CAST IRON CONSTRUCTION】 Acquaer sewage pump built by cast iron, provides superior reliability and it has corrosion resistant coated avoid corrosion effectively..
【GOOD COMPATIBILITY】Equipped with reinforced engineered non-clogging vortex impeller and 1-1/2'' NPT discharge, capable of passing 1/2" diameter solids. Ideal for use in residential sewage, basement and septic tank..

Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....

Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

Combination of regulator and flow meter as one single stage piston design unit.
Provides accurate regulation of gas flow.
Impact resistant machined brass body, polycarbonate flow tube and outer cover.
Features regulator and flow meter in one unit.
Provides accurate regulation of gas flow designed for MIG and TIG applications.

Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.

Check Stock