Categories

Best Sewer Analyzers

Software Project Manager's Bridge to Agility, The

  • VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: 30 dB.
  • For DSA815-TG, DSA815, DSA832E-TG, DSA832E, DSA832-TG and DSA832.
  • Used together with Rigol DSA series spectrum analyzers with tracking generators to make S11 measurements.
  • The VSWR bridge connects directly onto the front of Rigol DSA series spectrum analyzers with tracking generators to improve the test accuracy and to avoid the need for cables.
Check Stock

Dyn-A-Med Glass Circle Fiber Pad, For Moisture Balance Analyzers, 9cm Diameter (Case of 4000)

  • Non-hydrophilic, binder-free glass fiber pads for moisture analyzers.
  • Conveniently hold liquid or semi-solids for moisture analysis and determination.
  • Most commonly used in infrared or microwave analyzers.
Check Stock

Assembly Language Using the Raspberry Pi: A Hardware Software Bridge

  • VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: 30 dB.
  • For DSA815-TG, DSA815, DSA832E-TG, DSA832E, DSA832-TG and DSA832.
  • Used together with Rigol DSA series spectrum analyzers with tracking generators to make S11 measurements.
  • The VSWR bridge connects directly onto the front of Rigol DSA series spectrum analyzers with tracking generators to improve the test accuracy and to avoid the need for cables.
Check Stock

Sewer Skewer XL Vent Defroster for Sewer Pipes & Roof Vents, Copper Tee, Made in USA

  • PREVENTS SEWER PIPES FROM CLOGGING -The Sewer Skewer XL prevents sewer vent pipes from freezing and stops methane sewer gas backup.
  • MELTS SNOW & ICE - Made of copper which conducts heat from the sun and sewer gas to the top of sewer vent to melt ice and snow.
  • LONGER SEWER SKEWER FOR PROBLEMATIC SEWER VENTS – Includes two 15” screw on extension pipes that makes total length approximately 47” long and extends down 45”.
  • RATED FOR -25 DEGREES & FITS ANY SIZE PIPE – No measuring required, simply drop it in the sewer vent pipe and it begins to work.
  • ASSEMBLED IN USA BY ADULTS WITH DISABILITYS WITH PORTIONS SUPPORTING DISABLED VETERANS.
Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

  • Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
  • Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
  • Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
  • Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
  • Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 50 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 3600 PSI

  • Sewer jetting kit include 50 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sew....
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 100 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 4400 PSI

  • Sewer jetting kit include 100 feet sewer jet hose, button nose sewer jet nozzle, rotating sewer jetter nozzle, corner sewer nozzle, M22 female to 1/4’’ female NPT coupler and 1/4’’ quick coupler plug..
  • Sewer jetting hose has inner tube, reinforcement and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide i....
Check Stock

Hourleey Sewer Jetter Kit for Pressure Washer 50FT, Drain Cleaner Hose 1/4 Inch NPT, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle Spanner Tape Pearl Corsage Pin, 4000 PSI

  • Sewer Jetter Kit Package Incldue: 1 × 50ft sewer jet hose with 1/4" NPT male connector, 1 × Orifice 4.0 button nose sewer jet nozzle, 1 × Orifice 4.5 button nose sewer jet nozzle, 1 × Orifice 5.5 button nose sewer jet nozzle, 1 × M22 female thread to 1/4" female thread coupler, 1 x 1/4" quick connector, 1 x rotating nozzle, 1x waterproof tape, 1 box x pearl corsage pin, 2 x spanners..
  • High Quality Pressure Washer Hose Kit: Small-diameter, flexible sewer jetter hose with a connector that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC coating, Dual-layer terylene reinforcement, very durable, can resist weather, oil, ozone and abrasion..
  • 4PCS Efficient Sewer Jetter Nozzles: Hourleey update sewer jetter hose equip with 4.0, 4.5, 5.5, 3 different orifice sewer jet nozzle. There are 1 spray jet in the front and 3 rear 33° spray jets, it can efficient clean the blockage flush debris and the corner. And the rotating jet nozzle can 360 degree clean the flush around the drain and sewer lines..
  • Easy to Use with Quick Connect Plug: The 1/4 inch quick connect is easy to connect with most high pressure washer accessories. Suitable for many electric / gas-powered pressure washers up to 4,000 PSI. Hourleey sewer jetter hose can be connected to....
Check Stock

100FT Sewer Jetter Kit for Pressure Washer,Sewer Jetter Nozzles Kit,Drain Cleaning Hose Rotating and Button Nose Sewer Jetting Nozzle,1/4 Inch NPT Pearl Corsage Pin 5800 PSI SH

  • PACKAGE INCLUDES :Sewer Jetter Kit 100FT,button nose sewer jetter nozzle(front),button nose sewer jetter nozzle(corner),fixed nozzle,rotating sewer....
  • DURABLE :Sewer jetter hose has an inner tube, cover and reinforcement to protect the presure washer hose from bursting. The inner tube of the hose is....
  • EASY TO USE Both ends of the hose is 1/4'' M-NPT, Sewer Jetter Kit equipped with M22-14 adapter and 1/4'' quick connect plug, it can be easily applied....
  • WIDELY APPLICATION :100FT Sewer Jetter Kit for Pressure Washer can be used to clean cars, motorcycles, floors, windows, sink, toilet,driveways, roofs,....
  • SEWER JETTER NOZZLES :Sewer Jetter Kit Nozzle Ideal for general water pipe flushing and cleaning, 1 front jet at 0° that clears blockages,3 rear jets....
Check Stock

M MINGLE 150 Feet Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose, and Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 3600 PSI

  • 【Package Includes】150 FEET sewer jet hose x1, rotating sewer jet nozzle x1, button nose sewer jetter nozzle x1, coupler x1 (female M22 to female 1/4’’ NPT), 1/4’’ quick disconnect plug x1, spanners x2, box of pin x1. Working Pressure is rated at 3600 PSI. Burst Pressure is rated at 9000 PSI..
  • 【High-quality Material】The sewer jetting hose has an inner tube, cover, and reinforcement. The inner tube is made of thermoplastic polyester. The cover layer is made of thermoplastic polyurethane, which can resist oil, weather, ozone, and abrasion. The reinforcement layer is a 1/4" high tenacity polyester textile braid, which is chemically bonded. It is ISO 9001 Certified. Pin test each crimp to check the proper internal crimp..
  • 【Button nose sewer jetter nozzle】1 front jet at 0° angle can clear blockages. 3 rear jets at a 33° angle can flush out debris loosened by the front jet. The orifice is 4.0..
  • 【Rotating sewer jet nozzle】3 backward rotating blasts into the clogged pipe and move the nozzle through the pipe. The nozzle is easy to slide into drain pipes and sewer lines. It offers an even cleaning and flushes out debris. The orifice is 4.5..
  • 【Widely Application】The sewer jetter hose can connect to the pressure washer pump with an M22 c....
Check Stock

Camco 20 Ft (43051) Sidewinder RV Sewer Hose Support, Made From Sturdy Lightweight Plastic, Won't Creep Closed, Holds Hoses in Place - No Need for Straps

  • The ultimate protection and support for your sewer hose: The 20 feet Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station. It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic.
  • Hassle free preparation and setup: Conveniently ready to use straight of the box with no assembly required. Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling.
  • Lightweight yet durable and sturdy frame: This all plastic design, creates a lightweight and weatherproof product made to last long. It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains.
  • Designed for simplicity and reliability – Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps. Once sewer hose support is extended to the desired length, will remain in place without creeping closed. Flexible design allows this support to curve around and avoid obstacles with eas....
Check Stock

Sewer Jetter Kit for Pressure Washer 100FT, Newest 5800PSI Drain Cleaner Hose 1/4 Inch NPT Corner, Rotating and Button Hose Sewer Jetting Nozzle Pearl Corsage Pin Waterproof Tape with 2 Spanner

  • 【New Family Set 6 Heads Sewer Jetter Kit】We've included a variety of accessories you might use to make it easy for you to use our sewer jetting kit ! 1 × 100ft sewer jet hose,1 × button nose sewer jet nozzle, orifice 4.0,1 × M22 female to 1/4’’ female NPT coupler,1 × 1/4’’ quick connect plug,1 × rotating sewer jetter nozzle,1 × Side hole sewer jetter nozzle,1 × corner sewer nozzle.1x waterproof tape, 2xspanners, 1x box of pearl corsage pin..
  • 【Stronger And More Durable 5800PSI】Our hoses are universal with many gas-powered and electric pressure washers up to 5800 PSI.The reinforcement layer is a chemically bonded 1/4" high strength polyester textile weave. The cover layer is made of thermoplastic polyurethane and is resistant to weather, oil, abrasion and ozone..
  • 【4 Efficient Sewer Jetter Nozzles】 Orifice 4.0 Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner.4.0 orifice Button Nose Sewer Jetter Nozzle clears blockage and flush out debris by front 0° spray jet and 3 rear 33° spray jets..
  • 4.5 orifice Rotating Sewer Jet Nozzle offers an even cleaning and flushes out debris by 3 backward rotating spray jets which blast into clogged pipe and moves it through pipe. Corner sewer jette....
Check Stock

Camco 43031 10ft Sidewinder RV Sewer Hose Support, Made from Sturdy Lightweight Plastic, Won't Creep Closed, Holds Hoses in Place - No Need for Straps

  • The Ultimate Protection and Support for Your Sewer Hose: The 10 foot Sidewinder RV Sewer Hose Support by Camco lifts and cradles your sewer hose while in connection from your RV to the dump station.
  • It keeps your sewer hose off the ground and prevents potential damage or punctures to your RV or camper sewer hose by safely nesting it in heavy duty plastic.
  • Hassle Free Preparation and Setup: Conveniently ready to use straight of the box with no assembly required.
  • Comes complete with winding sidewinder RV sewer hose support, and orange custom fit storage handle that clasps on to your compressed Sidewinder for simple toting and handling.
  • Lightweight Yet Durable and Sturdy Frame: This all plastic design, creates a lightweight and weatherproof product made to last long.
  • It is constructed with a rust and corrosion resistant plastic material that is durable enough to carry your hose over the roughest terrains.
  • Designed for Simplicity and Reliability: Designed with deep cradles and grooves that will secure your sewer hose in place without having to use frustrating straps.
  • Once sewer hose support is extended to desired length, will remain in place without creeping closed.
  • Flexible design allows this support to curve around and avoid obstacles with ease.
Check Stock