Categories

Best Sewing Machine Timing Belt

Norme 1 Pack 183 cm 3/16 Inch Leather Belt Treadle Parts with Hook Compatible with Singer/Jones Sewing Machine

  • Package includes: a quality leather sewing machine belt, with a perforating cone, 10 pack sewing machine needles, a needle piercer and 2 bobbin.
  • Size: 183 cm in length, the round sewing machine leather belt is approx. 3/ 16 inch (5 mm) diameter for many singer treadle sewing machines.
  • Material: the sewing machine belt is made of leather, which makes the leather sewing machine belt firm and durable.
  • Usage: simply measure your original belt (if available) against this belt, cut the excess length off, puncture (using an awl or nail), than insert the end with the metal hook.
  • Applications: these sewing machine belt set can be applied for Singer cabinets and manual rocking foot pedals.
Check Stock

4 Pieces Treadle Sewing Machine Belt 72 x 3/16 Inch Sewing Machine Leather Belt with Hook Cow Leather Belt Replacement Sewing Machine Accessories Parts for Universal Pedal Sewing Machines

  • What you will get: 2 pieces red and 2 pieces brown sewing machine belts.
  • This sewing machine belt can fully meet your needs.
  • Quality material: the sewing machine belt is made of quality cowhide material, abrasion resistant and not easy to break, the sturdy and durable features keep it a long time use.
  • Easy to use: please carefully measure the length of your own belt, cut off the excess length of our belt, use an awl to drill a hole in the tail, connect the head hook to the tail hole, then use pliers to clamp the hook, and finally install it into the sewing machine.
  • Size information: the sewing machine belt is 72 inches/ 183 cm in length, 3/16 inch/ 5 mm in diameter, to allow more situations, so you can cut it at your needs.
  • Widely apply: the sewing machine belt is widely suitable for the domestic sewing machine and pedal sewing machine, with a right size suitable for most standard sewing machines. It is an ideal gift for sewing hobby or your grandma as well as Thanksgiving and Christmas.
Check Stock

uxcell Aluminum 20 Teeth 10mm Bore 5mm Pitch Timing Belt Pulley for 15mm Belt

  • This timing belt pulley suits to 15mm timing belt..
  • Used widely in milling machine, 3D printer, drilling machine or other machinery transmission..
Check Stock

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

CKPSMS Brand-Universal sewing machine motor stretchable belt with the perimeter ranging from 13'(330mm)to 15'(380mm) and diameter 3/16'(5mm) Compatible with SINGER brand household Sewing Machine(2PCS)

  • 2PCS sewing machine motor belt. Its material is nitrile rubber. Its perimeter ranges from 13 inch (330mm) to 15 inch (380mm) because it is stretchable and its diameter is 3/16 inch (5mm).
  • Please make sure that the perimeter of your required belt ranges from 13 inch (330mm) to 15 inch (380mm) BEFORE you buy to avoid unfitting issue and it is important to measure the perimeter of your original belt BEFORE you buy this belt..
  • Compatible with/Replacement for many SINGER brand KENMORE brand WHITE brand domestic / household sewing machines.
  • This sewing machine motor belt is a good choice as a sewing machine belt. Because it is easy to fit and there is no slippage and less drag on the sewing machine motor..
Check Stock

BZ 3D GT2 Pulley 60 Teeth Bore 8/5mm 60T Timing Pulley Synchronous Wheel Aluminum for Width 6mm 3D Printer Parts (Pack of 4pcs) (60Teeth Bore 8mm)

  • 【High Quality Material】- Timing belt gear is made of aluminum alloy, sturdy and durable,surface oxidation treatment, anti-rust and anti-corrosion effectively.Deburring is carried out at the threaded hole, which is not easy to wear the synchronous belt, also can increase the service life of the synchronous belt..
  • 【Feature】- Timing Pulley contact with the tooth side which minimizes the risk of the belt slipping.Accurate tooth surface of inner hole, less runout and more stable..
  • 【Application】- The XL size aluminum pulley wheel is suitable for general torque transmission design and high speed transmission design. Timing Pulley is widely used in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
  • 【Package Contents】- 1Pcs x Timing Pulley..
Check Stock

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

  • ✅The Juki DDL-8700 is a single-needle, straight stitch, industrial sewing machine. Manufactured by Juki, a world leader in sewing quality and technology, this machine is perfect for sewing light to medium weight fabrics (not intended for leather or other heavy materials)..
  • ✅Included accessories in the machine DDL-8700 head: : Bobbin Winder ___Thread Stand ___Machine Oil ___ Instruction Manual ___ Oil Pan ___Knee Lifter ___V Belt.
  • ✅Juki DDL-8700 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder O....
Check Stock

D&D PowerDrive 410-5M-15 Synchronous Timing Belt

  • [Material] - The timing belt is made of high-quality rubber material, durable and flexible.
  • Specially designed for linear motion, high positioning accuracy, excellent workmanship, and strong wear resistance.
  • [Advantage] - The timing belt adopts rubber tooth surface, which is not easy to slip, can absorb vibration, has a smooth transmission and low noise, which makes the operation more quiet, so it can provide a stable speed.
  • [Application] - Timing belts are widely used in 3D printers, engraving machines, drilling machines, CNC machine tools, lathes, gear hobbing machines, gear forming machines, vacuum cleaners, electric skateboards, robots, lasers, motorcycles, chemical fiber, paper making, printing, chemical machinery and other equipment.
  • [Package Content] - 1pcs x 300L Cogged Toothed Timing Belt.
Check Stock

Saiper GT2 16 Teeth 5mm Bore Timing Pulley Aluminum Synchronous Wheel for 6mm Belt, Compatible with RepRap 3D Printer Prusa i3 (5pcs)

  • Teeth: 16T, Bore Diameter: 5mm. Total size: 14*14*14mm.
  • Synchronous Wheel made of high quality Aluminum Alloy, excellently machined, finished smoothly and longer service life.
  • Contact with the 16 tooth side which minimizes the risk of the belt slipping. Applies to 6mm width belt!.
  • GT2 16 Teeth Timing Pulley providing a smoother transition between belt, good performance for 3D printers.
  • GT2 timing belt pulley system especially suited for linear movement and positioning. Widely used in 3D printer, milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions.
Check Stock

Dorhea GT2 2GT 5mm Bore Aluminum Tooth Timing Belt Idler Pulley 20 Teeth 5mm Bore for 3D Printer Accessories 6mm Width Timing Belt (Pack of 5 pcs)

  • Material: High quality Aluminum,sturdy and durable, adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively.
  • Tooth timing blet pulley, use with 20 Teeth 5mm bore idler pulley.
  • Use High-quality Motor-grade bearings to ensure that the machine is works good.
  • Suitable for 6mm width timing belt, widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasion.
  • Package include : 5 pcs teeth timing belt pulley, each of the two sides with wheels were mounted bearings.
Check Stock

ZRM&E 5PCS 20 Teeth 5mm GT2 Timing Belt Pulley for Width 6mm 3D Printer Parts Accessory

  • Type: 5pcs GT2 Timing Belt Pulley, Come with 1 hex wrench, and matched M4 fastening screw, which has been already screwed in the pulley..
  • High Quality: Adopt high quality aluminum, excellently machined, finished smoothly, durable to use, perfect choice for 3D printer or similar projects..
  • Specification: 20 teeth, 5mm inner bore, 16mm height, fit for 6mm width GT2 timing belt and 5mm shaft stepper motor..
  • Special Design: Rounded teeth can engage with belt longer, flange design admits synchronizing shaft rotations, provides a smoother and high power transmission..
  • Application: Widely used in milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions..
Check Stock

5M GT2 Timing Belt, Upgrade Non-Slip Version, Width 6mm, Fit for 3D Printer and Most Belt Driven Printers

  • 【Material】- The timing belt is made of high-quality rubber material, durable and flexible.
  • Specially designed for linear motion, high positioning accuracy, excellent workmanship, and strong wear resistance.
  • 【Advantage】- The timing belt adopts rubber tooth surface, which is not easy to slip, can absorb vibration, has a smooth transmission and low noise, which makes the operation more quiet, so it can provide a stable speed.
  • 【Application】- Timing belts are widely used in 3D printers, engraving machines, drilling machines, CNC machine tools, lathes, gear hobbing machines, gear forming machines, vacuum cleaners, electric skateboards, robots, lasers, motorcycles, chemical fiber, paper making, printing, chemical machinery and other equipment.
  • 【Package Content】- 1pcs x 5M300 Arc Toothed Timing Belt.
Check Stock

LC LICTOP 2GT Aluminum Timing Belt Idler Pulley GT2 5mm Bore 6mm Width Toothless for 3D Printer Timing Belt,Pack of 10

  • ✔ Product Contain: 10 x Timing belt pulleys.
  • ✔ Product Size: Drilling diameter: 5mm/0.2", Sutible for GT2 6mm/0.24" wide timing belt..
  • ✔ Product Material: Aluminum, surface oxidation treatment, effective rust prevention, anti-corrosion.
  • ✔ Product Features: Double bearings: Use high quality motor grade bearings to ensure good machine operation..
  • ✔ Applications: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications..
Check Stock