EDIMS Mini SAS to SAS Cable Internal Breakout Cable SFF-8087 to SFF-8482 with 4X Molex Power Connectors for Raid Controller to Hard Drive 3.3FT
- Internal Mini SAS SFF-8643 to (4) 29pin SFF-8482 connectors with power connecting a SAS controller (SFF-8643) to four SATA/SAS disks (SFF-8482).
- Please note that Mini SAS (SFF-8643) is host, 4 SAS 29 (SFF-8482) is target, internal Mini Serial Attached SCSI x4 (SFF-8643) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
- Before you buy this cable, Please make sure the Mini SAS (SFF-8643) on your motherboard or RAID controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
- Mini SAS (SFF-8643) connect to the controller, 4 SAS connect to the HDD (hard disc driver).
- 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.
Check StockANNNWZZD Internal Mini SAS Cable,SFF8087 36 Pin to SFF8087 36Pin Data Cable,Mini-SAS to Mini-SAS Cable (3FT/1M)
- 【Kindly Reminder】Please note: this cable can ❌ Not work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to (4) 29pin SFF-8482 connectors with SATA Power.
- 【Mini SAS to SAS Cable】Mini SAS 36 pin (SFF-8087) connect to the controller, 4 x SAS connect to the HDD (Hard Disc Driver).
- 【36 Pin to 29 Pin Cable】Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 (SFF-8087) to (4) x1 (SFF-8482) Serial Attached SCSI (controller based) fan-out cables.
- 【Controller to SATA Disks】Connecting a SAS controller (SFF-8087) to four SATA disks (SFF-8482).
- 【What You Get】1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.
Check StockA-Tech 4GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 980, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module
- Compatible with Intel 1st Gen i3/i5/i7/Pentium, 2nd Gen i3/i5/i7/Pentium/Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
- Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 980 (MT/DT/SFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
- 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
- 4GB (1 Stick of 4GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
- Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
Check StockStarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)
- Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
- PCIe GbE Fiber Network Card with Open SFP Slot.
- Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
- No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
- Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
- Compatible with most Gigabit SFP modules.
- Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
- Includes low-profile/half-height installation bracket.
- Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.
Check StockA-Tech 8GB RAM Stick for Dell OptiPlex 9010, 7010, 3010, 990, 790, 390, DT/MT/SFF/USFF - DDR3 1333MHz PC3-10600 Non-ECC DIMM Memory Module
- Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
- Compatible with Intel 2nd Gen i3/i5/i7, Pentium, Celeron, & 3rd Gen i3/i5/i7 CPU Processors *Intel 2nd Gen Pentium G600 series & Intel 2nd Gen Celeron processors will run memory at 1066MHz*.
- Designed for Dell OptiPlex Models: 9010 (MT/DT/SFF/USFF), 7010 (MT/DT/SFF/USFF), 3010 (DT/MT/SFF), 990 (MT/DT/SFF/USFF), 790 (MT/DT/SFF/USFF), 390 (MT/DT/SFF) – MT (Minitower), DT (Desktop), SFF (Small Form Factor), USFF (Ultra Small Form Factor).
- 8GB (1 Stick of 8GB) DDR3 1333MHz PC3-10600 RAM Memory Module.
- 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
Check StockCableCreation 6.6FT External HD Mini SAS SFF-8644 to SFF-8644 Cable, 2M/ Black …
- Target: SFF-8482 SAS connector,each with data and power,mainly used for SAS hard disk,connecting SAS/SATA hard disk.
- Supports up to 6Gbps throughput per channel.
- Internal miniSAS SFF-8087 to (4) SFF-8482 connectors with SATA power power..
- This mini SAS cable allow you to connect from a SAS controller with SFF-8087 internal miniSAS connector to four (4) SAS hard drives..
Check StockCableCreation Internal HD Mini SAS (SFF-8643 Host) - 4X SATA (Target) Cable,SFF-8643 to 4X SATA Cable, SFF-8643 for Controller, 4 Sata Connect to Hard Drive, 1M / 3.3FT
- [ SFF-8643 Cord ] The SFF-8643 is the latest HD Mini SAS connector design for implementing HD SAS Internal interconnect solutions..
- [ High Data transfer] 36 pin High Density (HD) Mini SAS SFF-8643 Internal cable assemblies are available for SAS 2.1, 6Gb/s and SAS 3.0, 12Gb/s specification. Hybrid versions of these new cables will allow for a smooth transition from 6Gbps to 12Gbps.
- SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.
- [ SFF-8643 Port ] SFF-8643 interface is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. It support up to 4-ports (4 lanes) of SAS data and is compliant with the latest SAS 3.0 spec.
- [ What You Get] 1 x CableCreation 3 FT Mini SAS SFF-8643 Cable. CableCreation provide 24 Months Warranty and lifetime Technical Service.
Check StockCableCreation Internal Mini SAS HD Cable, Mini SAS SFF-8643 to SFF-8643 Cable, 3.3FT
- [High Speed Data Transfer]OIKWAN Internal Mini SAS SFF-8643 to SFF8643 is a high-speed data storage interface designed for high-throughput and fast data access.
- [Unique design ]can make for better cable management in some situations, especially in tight spaces..
- [Wide Compatibility ] Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224.
- [High Performance Cable] with SFF8643 to SFF8643 connector, mini sas line interface, fast and stable connection. Compact design, the cable doesn't take up much space, which promotes efficient office work. Treated by injection molding, this cable looks great and is durable in use..
- [What You Get] You will get 1 x Mini SAS SFF8643 to SFF8643 cable, backed with 36 Months Warranty and lifetime technical service..
Check StockTwozoh Internal Mini SAS HD SFF-8643 to SFF-8643 Cable 1.6Ft/0.5M
- Internal Mini SAS HD SFF-8643 to SFF-8643 Cable for Mini SAS to Sata Adapter Backplane Raid Controller Card..
- Mini SAS HD SFF-8643 to SFF-8643 from 6GB to 12Gbps data rates, 4-Ports of SAS Data and Is Compliant with the Latest SAS 3.0 specification..
- Mini SAS 36 Pin SFF-8643 Port for Norco RPC-4225, Dell R710/R720, Dell T610 server, H200 controller, PERC H700/H310, PE T710, NORCO RPC-4220..
- Reliable Quality Assurance: All Mini SAS are 100% inspected and visual checked. No packing is performed until all the parameters can satisfy the....
Check StockCABLEDECONN Mini SAS 36 SFF-8087 to (4) SFF-8482 Connectors with SATA Power 1m
- connecting 4x SFF-8482 SAS drives to 1x SFF-8087 SAS controller connection, through a single cable.
- Provides reliable, high-performance drive and Mini SAS controller connectivity.
- Supports up to 6Gbps throughput per channel.
- 4x SFF-8482 connections, each with data and power.
Check StockOeveo Under Mount 444-14W x 4H x 11D | Under Desk Computer Mount for SFF | UCM-444
- Designed to mount your Desktop Computer, PC, CPU, Workstation, or Computer Tower. The Computer Under Mount allows you to mount your computer....
- Under Mount 444 Specifications - Dimensions: 14" Width x 4" Height x 11" Depth. Made of 16GA Cold Rolled Steel. Powder Coated Flat Black. Model ID:....
- Quick, easy, and simple installation. All mounting hardware included: four Black 1-1/4" Screws, and four Wall Anchors provided..
- BEST USES: Computer Mount, PC Mount, CPU Mount, Workstation Mount, Computer Tower Mount, Lenovo ThinkCentre SFF Mount, Dell Optiplex SFF Mount, and....
- TESTED COMPATIBLE MODELS: LENOVO Models - Lenovo ThinkCentre M700 SFF, Lenovo ThinkCentre M800 SFF, Lenovo ThinkCentre M900 SFF.
Check StockA-Tech 4GB RAM Stick for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, MT/DT/SFF/USFF - DDR3 1600MHz PC3-12800 Non-ECC DIMM Memory Upgrade Module
- Designed for Dell OptiPlex Models: 9020 (MT/SFF/USFF), 9010 (MT/DT/SFF/USFF), 7020 (MT/SFF), 7010 (MT/DT/SFF/USFF), 3020 (MT/SFF), 3010 (MT/DT/SFF) – (Minitower, Desktop, Small Form Factor, Ultra Small Form Factor) *NOT for micro or AIO (All-in-One) models*.
- Compatible with Intel 2nd Gen i3/i5/i7/Pentium, 3rd Gen i3/i5/i7 & 4th Gen i3/i5/i7/Pentium CPU Processors *Intel 2nd Gen CPU Processors will run memory at 1333MHz*.
- Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
- 4GB (1 Stick of 4GB) DDR3 1600MHz PC3-12800 RAM Memory Module.
- 1Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
Check StockA-Tech 16GB RAM Kit for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, MT/DT/SFF/USFF - (2 x 8GB) DDR3 1600MHz PC3-12800 Non-ECC DIMM Memory Upgrade
- Designed for Dell OptiPlex Models: 9020 (MT/SFF/USFF), 9010 (MT/DT/SFF/USFF), 7020 (MT/SFF), 7010 (MT/DT/SFF/USFF), 3020 (MT/SFF), 3010 (MT/DT/SFF) – (Minitower, Desktop, Small Form Factor, Ultra Small Form Factor) *NOT for micro or AIO (All-in-One) models*.
- 2Rx8 1.5V 240-pin Non-ECC Unbuffered DIMM (Non-ECC UDIMM).
- 16GB Kit (2 Sticks of 8GB) DDR3 1600MHz PC3-12800 RAM Memory Modules.
- Genuine A-Tech Brand – Lifetime Warranty – Toll Free Technical Support.
- Compatible with Intel 2nd Gen i3/i5/i7/Pentium, 3rd Gen i3/i5/i7 & 4th Gen i3/i5/i7/Pentium CPU Processors *Intel 2nd Gen CPU Processors will run memory at 1333MHz*.
Check Stock