Categories

Best Shaft Coupler

RC Drive Shaft for 1/10 Traxxas Slash 4X4 2WD Rustler VXL Stampede Rustler Hoss,ARRCat RC Upgrades Parts,4Pcs Front and Rear Transmission Universal Drive Shaft CVD Heavy Duty (Red)

  • 【Parameters】- Connect to motor shaft: 5mm/0.2".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 5mm/0.2" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

RuiLing 2PCS Shaft Coupler with 1PC M4 Mini Hex Wrench Aluminium Alloy CNC Stepper Motor Encoders Engraving Machine Z Axis Flexible Shaft Coupling 6-8mm D19xL25 3D Printer Accessories

  • Material: Made of good quality aluminum alloy, integrated molding, resistant to oil, rust and corrosion..
  • Bottom Shaft Diameter: 8mm/ 0.31in Mounting Screws: 4mm/ 0.16in.
  • Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
  • Package includes: 2pcs 3D Printer Shaft Coupler 6-8mm + 1pc M4 Mini Hex Wrench.
Check Stock

Allstar Steering Loading Coupler, 3/4 in Steering Shaft, Steel, Black Paint, Woodward 20 Spline Disconnect Couplers, Each (ALL52307)

  • combination u-joint and a non-locking steering coupler.
  • slips over the splined end of the steering shaft for easier loading and unloading of cars in enclosed trailers through the use of a remote steering shaft.
  • Coupler has a built-in u-joint that accepts 3/4" steering shaft or tubing.
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

Foredom Hand Piece #44Ht

  • Size: 2cm x 2cm x 2.5cm / 0.79inch x 0.79inch x 0.98inch. Diameter 20MM, length 25MM, apertures at both ends are 5MM and 8MM respectively.
  • Flexible Couplings made of premium aluminum alloy material, exquisite workmanship, bright appearance, good toughness..
  • It has the function of buffering, damping and improving the dynamic performance of the shaft series..
  • This high-quality rod coupler is widely used to connect servo motors, stepping motors, encoders, screw drives, mechanical platforms, etc..
  • Package included: 1 X Shaft Coupler Diameter 5mm to 8mm.
Check Stock

uxcell 6.35mm to 12mm Bore L31xD25 Flexible Coupling Jaw Coupler Shaft Joint for Servo Motor

  • Both the cylindrical inner diameter and the hexagon side length are 7 mm, support for any of the motor shaft diameters of 7mm/0.275in..
  • Coupler copper shaft coupling for the automotive tires DC motor robot, also suitable for cup turner, rod dryer, electric car toy, etc..
  • 8 pcs durable brass material 7mm length hexagon motor flexible coupling, you can use these for a long time..
  • Package Includes: 8 shaft motor flexible coupling coupler.
Check Stock

Ochoos 1pcs D30 L40 CNC Flexible Jaw Spider Plum Coupling Shaft Coupler 5/6/7/8/9/10/11/12/14/16 - (Inner Diameter: 14mm to 16mm)

  • Package Includes: Flexible Shaft Coupling Coupler 5mm -16mm  D=30mm,L=40mm | Note: The color of the item may vary slightly due to photography and your own computer.
  • Shaft coupler suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

uxcell 5mm to 6.35mm Aluminum Alloy Shaft Coupling Flexible Coupler Motor Connector Joint L25xD19 Silver,5pcs

  • Material: made of good quality brass, antioxidant and durable.
  • 12 pcs brass material 6mm length hexagon motor flexible coupling.
  • Coupler copper shaft coupling for the automotive tires DC motor robot car.
  • Package Include: 12 x Shaft Motor Flexible Coupling Coupler, 4 x Allen Wrench, 24 x Screws.
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

COPLAR 18-Inch Straight Shaft Trimmer Attachment (String Trimmer Attachment)

  • 18 in. cutting swath for efficient cutting..
  • 0.08in. Line: Durable and can easily be loaded in seconds..
  • Straight shaft configuration offers excellent reach..
  • Compatibility: Fits Attachment capable units from Ryobi, Greenworks, Remington, Craftsman, Yard Machines, Troy-Bilt, Yardman, Snapper, Bolens, Murray, Kobalt and most other major brands.Powerhead coupler accepts 1 inch AL diameter tube Drive shaft connector: Square shape .205” Female Attachment drive shaft: Square shape .200” across flats..
Check Stock

CCTREE Flexible Couplings 5mm to 8mm NEMA 17 Shaft Coupler forCreality CR-10 V2 CR-10S S4 S5 Ender3,Ender 3 Pro,Ender 5 Makerbot RepRap Prusa i3 3D Printer or CNC Machine Pack of 5pcs

  • Flexibility of this coupler removes stress between motor and driving component.
  • Compatible with NEMA 17 stepper motors (for 5mm shaft diameter).
  • Useful in Creality CR-10S ,RepRap 3D Printers and small CNC machines.
  • Package include: 5Pcs x Shaft coupler 5mm to 8mm.
Check Stock