Categories

Best Shaft End

NEW 5HP COMPRESSOR DUTY ELECTRIC MOTOR, 56HZ FRAME, 3450 RPM, 7/8\ SHAFT DIAMETER, NEMA RATED MOTOR

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Warrior Burn Warp Pro Lacrosse Stick

  • Burn Warp Pro head + Burn Pro Carbon shaft.
  • Mid-pocket with low and high whip options, which are designed for the elite attackman or midfielder looking to maximize shot speed and accuracy.
  • Minimus Carbon Fiber Shaft weighs just 125g and provides best-in-class durability.
  • 2 endos included: 1 Warp End Cap for maximum shot leverage, and 1 Warrior End Plug for the lightest possible stick setu.
Check Stock

Warrior Burn Warp Pro Lacrosse Stick

  • Burn Warp Pro head + Burn Pro Carbon shaft.
  • Mid-pocket with low and high whip options, which are designed for the elite attackman or midfielder looking to maximize shot speed and accuracy.
  • Minimus Carbon Fiber Shaft weighs just 125g and provides best-in-class durability.
  • 2 endos included: 1 Warp End Cap for maximum shot leverage, and 1 Warrior End Plug for the lightest possible stick setu.
Check Stock

Warrior Burn Warp Pro Lacrosse Stick

  • Burn Warp Pro head + Burn Pro Carbon shaft.
  • Mid-pocket with low and high whip options, which are designed for the elite attackman or midfielder looking to maximize shot speed and accuracy.
  • Minimus Carbon Fiber Shaft weighs just 125g and provides best-in-class durability.
  • 2 endos included: 1 Warp End Cap for maximum shot leverage, and 1 Warrior End Plug for the lightest possible stick setu.
Check Stock

Allstar-ALL52132 Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit

  • Steering Shaft Support, Spherical Rod End, 3/4-16 in Right Hand Male Thread, Oversized, Jam Nut, Steel, 3/4 in Steering Shaft, Kit.
  • Mounts to steering column bracket to hold steering shaft in place.
  • Kit includes one rod end and two steel 3/4 " rh jam nuts.
Check Stock

VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter

  • Sturdy and Durable: This PTO shaft is a well-forged series4 driveline shaft with CE certification. It consists of a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery..
  • 6 Spline ＆ Round Ends: Constructed with a 6-spline tractor end and a round implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before..
  • Adjustable Length: Compressed Length: 43″ / 1100 mm.
  • Extended Overall Length: 61″ / 1550 mm. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
  • Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
Check Stock

HTS 121S6 6-In-1 Flat Head & Phillips Reversible Screwdriver

  • 5mm Flat Head / #1 Phillips and 7mm Flat Head / #2 Phillips.
  • Reversible stainless steel shaft locks in place with a spring-loaded ball bearing.
  • The shaft features a 1/4" nut driver on one end and a 5/16" nut driver on the opposite end.
Check Stock

K EXCLUSIVE Replica Double Pointed Native Spear - Wooden Shaft, Stainless Steel Spear, Breaks Down, Feather Accents, Leather Wrappings - Overall Length 67 1/4'

  • Imposing native style spear with double the piercing power and double the visual appeal perfect for display or use.
  • On one end of the shaft is a piercingly sharp forged stainless steel spear head and, on the other end, is a heavy-duty stainless steel spike.
  • Rich brown wooden shaft features embedded, gold painted markings, leather wrapping, brass stud accentst features embedded, gold painted markings, leather wrapping, brass stud accents.
  • The 67 1/4"shaft breaks down into two pieces for transport or for use separately.
Check Stock

Sunluway - 12020-2 Pack Axle Popper Kit - Inner CV Axle Removal Tool Set - for Use on Front Wheel Drive Vehicles-Remove Most Vehicles’ Half-Shaft Drive Axles-Fix Damaged CV Joints

  • Easy to disassemble: Skip the complicated slide hammer puller sets and pry bar tools that can cause damage to your axle, use this CV shaft tool to easily disassemble the CV shaft, saving your time and energy !.
  • Material: CV Axle Removal Tool Set made of high-strength hardened steel, which has high hardness, high strength, with stable performance and reliable use and longer service life.
  • Benefits: Better and Safer than Using a Hammer and Bar because the wedge-shaped fork end of the axle Popper applies uniform pressure to both sides of the shaft To ensure safe release (Two piece CV axle popper tool kit ensures fitment for most FWD vehicles).
  • Easy installation: Insert the wedge wheel bearing tool between the transaxle case and the axle joint, and the fork head surrounds the axle end, tap the end of the front fork to release the axle shaft. these axle puller tools are simple, yet powerful, Is your essential tool !.
  • 100% Satisfaction Guarantee: If you're not 100% satisfied with our , please feel free to contact us, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Electric Skateboard Motor BLDC D6374 190KV 3350W Belt Brushless Motor Outrunner Sensored 15t Pulley Engine for DIY Electric Longboard,Off Road e-Skateboard,Scooter,esk8,ebike Part Accessories-GOESKBA

  • Overview GOESKBA Electric Skateboard Motor D6374 190KV Max 3350W 6130RPM 12S 25mm shaft D-shape motor adopt high-end material and professional design make sure provide powerful power for eskateboard,ebike,scooter,robots etc..
  • Features Precision design can deliver good performance and efficency also give maximum conversion of energy , high-end material make sure excellent heat dissipation and low energy consumption,professional design make sure electric skateboard starts smooth and low noise..
  • High-end Material Japanese Kawasaki silicon steel sheet iron core reduce the iron loss of the motor and improve the efficiency of the motor,420 material shaft more sturdy,good finishing on the whole outer body to enable motors dustproof,Japan NSK Bearings improve the service life of the motor、eliminate abnormal noise..
  • Professional Design double side arc-shaped convex magnets array can better match work with VESC FOC mode to greatly reduce the noise,hall plate fixed in the stator tightly,three M3 screws dispensing reinforced lock shaft prevent deviation,anti loose T-type motor shaft prevent slipping and loosening,multi-strand winding better dissipation and avoid skin effect..
  • Widely application GOESKBA Electric Skateboard Motor D6374 can be widely used in Electric....
Check Stock

Broan Heater Replacement Vent Fan Motor # 97010254, .9 amps, 3200 RPM, 120 volts

  • Exact replacement motor for: 15353, 04J2063, J238-075-7151, P15353, SX17549.
Check Stock

3pcs/Pack Brass Mini Ball Valve Shut Off Switch 1/4" NPT Male x 1/4 INCH NPT Female Rated to 600WOG for Water Air Compressor Etc

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Carbon Express Maxima Red SD Carbon Arrow – 6 Pack, Black & Red, 350 (50871)

  • DYNAMIC SPINE CONTROL – Patented high-tech carbon material construction that manages dynamic spine in a new way to make broadheads fly better. Maxima RED SD uses different carbon materials to control arrow flex to the RED ZONE.
  • SMALL DIAMETER [SD] – Features a .203 inch inside diameter for better penetration and less wind-drift. Available in 250 and 350 Spine Sizes.
  • RED ZONE – The section of the Maxima RED SD arrow shaft that manages arrow flex in flight, which is called dynamic spine. The RED ZONE is the best section of the arrow shaft to contain Dynamic Spine and make broadheads shoot best.
  • ACCURACY – Broadhead moves the center of mass forward on an arrow, increasing the flex of the arrow. The shape of the broadhead acts like wings on the front of the arrow. The stiffer front end of the arrow shaft repositions arrow flex to the Red Zone.
  • REDUCED OSCILLATION – Reduced oscillation on the front end makes broadheads shoot more consistently and enables more accurate shots at longer distances.
Check Stock