Categories

Best Shaft Gears

6PCS Stainless Steel Shaft, 80mm / 3.1in D Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - Precisely grounded D-axle connects the wheels and gears to the power motor for easy and fast operation for your everyday use..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, it has high hardness, high strength, wear resistance, durability and long service life..
  • NO SLIP - D-shaped contour prevents wheels and gears from spinning and slipping on the shaft, less error-prone, stable operation, and efficient work..
  • ADJUSTABLE LENGTH - Can be cut to the length you use with a metal cutting blade according to your needs, suitable for your different levels of use..
  • PRODUCT SPECIFICATIONS - 6PCS, length 40 mm/1.6 inches, material: stainless steel, shaft: d shaft, outer diameter 6 mm/0.2 inches, suitable for your use and replacement..
Check Stock

Kyosho Optima Vintage Series Off-Road Buggy Vehicle (1/10 Scale)

  • Chassis : all plates and the Main chassis bars are now slightly thicker 6061t6 aluminum for improved durability.
  • Drive-train : kit includes both chain and belt drive trains allowing use of more powerful motors.
  • Gears : 48 pitch gears. Sintered Alloy gears & high impact nylon gears with newly added slipper clutch to handle current power levels.
  • Shocks : new 10mm diameter aluminum cylinder with stainless steel shaft for improved damping.
Check Stock

6PCS Stainless Steel Shaft, 100mm/3.9in D Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - The precision ground steel D axle connects the wheels and gears to the power motor for a precise and stable connection..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wear resistance, durable and long service life..
  • NO SLIP - D-shaped contour prevents wheels and gears from spinning and slipping on the shaft, making it less error-prone and improving work efficiency..
  • CAN BE CUT - Can be cut into the length you use with a metal cutting blade according to your needs, with stable performance to meet your different needs..
  • PRODUCT PARAMETERS - 6PCS, Length 100mm/3.9inch, Material: Stainless Steel, Shaft: D Shaft, Diameter 4.75mm/0.2inch, Weight 12.9g/0.5oz, for daily replacement..
Check Stock

Traxxas 7579X Gear set differential metal

  • Metal differential gear set for Latrax 1/18 scale vehicles.
  • Metal gears may be retrofitted into Latrax 1/18 scale vehicles like the Teton and Rally.
  • Kit includes two output gears, four spider gears, 35T ring gear, and shaft.
  • This product is made from high quality materials and designed for lasting performance.
  • Use Traxxas stock and hop-up Replacement parts to get the most out of you Latrax RTR vehicles.
Check Stock

Blender Replacement Parts for Magic Bullet, Compatible with 250W Magic Bullet Blender (MB gear)

  • ⚙️ [COMPATIBLE MODEL] The replacement accessories for Magic Bullet is ONLY compatible with 250W Magic Bullet Blender (MB1001 Series), Does NOT fit Mini Magic Bullet or Baby Bullet..
  • ️ [EASY TO INSTALL] 1. Take a towel, with a towel wrap blade with his left hand holding.2. Right hand holding the connecting shaft, connecting shaft rotate clockwise to fall.3. When installing counter-clockwise to tighten..
  • [PACKAGE INCLUDE] 2 Blender Base Gears + 2 Blender Blade Gears + 4 Gaskets. Without any risk shopping with us. If you have any question, we will help you within 24 hours..
Check Stock

Base Gear for Magic Bullet Blender MB1001 250W Blade Gear Replacement Part

  • PACKAGE INCLUDE: 2 plastic gears for the Motor base and 4 rubber gears for under the blade. Blade is NOT included..
  • MODEL NUMBER:Base gear replacement for Magic Bullet MB1001 (120V,Max 250W,60HZ).
  • Size:30mm diameter whole piece and approximately 4mm diameter internal screw hole.
  • GOOD REPLACEMENT:This is non-original aftermarket part,but It is made exactly fit for Magic Bullet.
  • EASY TO INSTALL: 1. Take a towel, with a towel wrap blade with his left hand holding.2. Right hand holding the connecting shaft, connecting shaft rotate clockwise to fall.3. When installing counter clockwise to tighten..
Check Stock

TOOLACC Base Gear for Magic Bullet Blender MB1001 250W Blade Gear Replacement Part

  • PACKAGE INCLUDE: 2 plastic gears for the Motor base and 4 rubber gears for under the blade. Blade is NOT included..
  • MODEL NUMBER:Base gear replacement for Magic Bullet MB1001 (120V,Max 250W,60HZ).
  • Size:30mm diameter whole piece and approximately 4mm diameter internal screw hole.
  • GOOD REPLACEMENT:This is non-original aftermarket part,but It is made exactly fit for Magic Bullet.
  • EASY TO INSTALL: 1. Take a towel, with a towel wrap blade with his left hand holding.2. Right hand holding the connecting shaft, connecting shaft rotate clockwise to fall.3. When installing counter clockwise to tighten..
Check Stock

HOBART Worm Wheel with Bushing Assembly 00-124751-3

  • 1. This brass gear shaft kit is made of high quality brass, which is strong and durable and has a long service life..
  • 2. The rotating structure of the brass gear shaft is simple and compact, small in size and light in weight..
  • 3. Sizes of gears: 12x16x4mm/0.47x0.63x0.12inch (H x OD x ID).
  • Sizes of gear shafts: 20x11.7x6mm/0.79x0.46x0.24inch (H x OD x ID).
  • 4. The set include one 0.5 modulus 6mm hole dia brass gear shaft and one 30T brass gear wheel..
  • 5. Package includes: 1x Brass Wheel, 1x Brass Gear Shaft, 2x Screws..
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

VKP Brands VKP250-M2 Electric Moto small White

  • Quick and easy installation and removal, Energy efficient and durable..
  • High torque power combined with all metal gears.
  • Will provide years of reliable service. Motor specifications: 120 Volts AC, 60 Hz, 0.75 Amp, 90 Watts, 50 RPM.
  • Made of ABS plastic. Gears: Steel. Shaft: Chrome plated steel..
  • Warranty: 5 Year. Country of origin: USA..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Mecanum Left Wheel, Metal Smooth Movement Mecanum Wheel 45-Degree Omnidirectiona Mecanum Wheel Industrial Robot Parts for Car for Robot for Industry (Right)

  • These gears can mount with two set screws for excellent hold on 8mm REX shafting..
  • While pinion gears are most commonly associated with being the 1st gear in a geartrain, they certainly don't have to be..
  • The pinion gears here are able to mount on a shaft without the need for a hub. It's very convenient..
  • The gears are constructed of high quality cast steel, high hardness and durable, has long service life..
  • The 24 tooth 8mm REX bore perfectly matches our 8mm REX shafting to create a positive drive..
Check Stock