Martin 3020 2 Taper Bushing, Sintered Steel, Inch, 2\ Bore, 4.25\ OD, 2\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockFlexible Shaft Power Drill Extension with 1/4-Inch keyless Chuck Carded Flex Attachment Adapter Cable Shaft for Rotary Grinder Woodworking Tool Black - By RamPro
- ✓The flexible shaft lets you see your progress while the sander moves on the contours of your work piece. The Installation of the flex shaft is....
- ✓Specification: Equipped with a highly flexible extension 1/4-inch scroll chuck and The shaft is intended to be used around 10,000 rpm, mainly for....
- ✓Quality: The front handle of the flexible shaft is made of strong rubber. This flex shaft can be mounted, which is simple and easy to install, just....
- ✓Design: The flex shaft’s high quality and vibration-free design is optimally matched to the motor. Ergonomic pen design with a smooth rubber....
- ✓Satisfied Service and Guarantee - Enjoy a smooth & frustration-free experience with our 100% Satisfied Service in one Month! If you have any....
Check StockMartin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockMartin 2012 1 1/8 Taper Bushing, Sintered Steel, Inch, 1.13\ Bore, 2.75\ OD, 1.25\ Length
- Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Sintered steel for greater strength and resistance to wear than steel.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper bushings from various manufacturers.
Check StockHandsEase 3.175mm Flex Shaft adapter Attachment Flexible Power Drill Extension Cable Chuck for Dremel Rotary Grinder Woodworking Tools with Wrench Gold
- Dremel flex shaft ergonomic pen design with smooth metal surface makes easy, comfortable carving, sanding and polishing, especially for a long time....
- HandsEase flex extension no need to match the specifications of the electric grinder interface. As long as your electric grinder or electric drill can....
- The flex shaft installation is convenient and simple, only need the connector handle be clamped to the electric grinder..
- The flex shaft connector needs to be connect by electric grinder.(This flex shaft does not have a machine, please choose another machine)..
- Rotary tool flex shaft can used with polishing kits, drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels..
Check StockTB Woods 2517 TL25171 Taper Lock Bushing, Cast Iron, Inch, 1\ Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check StockFulton 142410 Dual Speed Winch - 2600 lbs. Capacity, 1 Pack
- 2, 600 lb. Capacity two-speed winch one fast speed for quick pull-in, a second low speed for increased mechanical advantage 10 inch 'comfort grip' handle.
- Shift lock design allows changing gears without moving the crank handle from shaft to shaft, just Lift the shift lock and slide the shaft into the desired gear position.
- Neutral free-wheel position allows quick Line pay out without spinning the handle optional handbrake kit no. 501201 (sold separately) can be installed after the winch is mounted.
- High-carbon Steel gears for superb strength and long-term durability stamped carbon Steel frame provides rigidity, important for gear alignment, and longer cycle life.
- Designed for use with 2 inch straps up to 20 feet long.
Check StockFlexible Shaft Bits, Snake Shape Screwdriver Connect Link, 1/4\ Hex Shank Extention Screwdriver Bit Holder Connect Link Power Tools(Red)
- HIGH QUALITY - The screwdriver connect link is made of high‑quality materials, which is reliable and durable in use.
- FUNCTION - The drill flexible shaft is mainly used in computer chassis, electrical cabinets, furniture, electrical appliances and other narrow space screwdriver can not work in an environment operations.
- WIDELY APPLICATION - This Flexible shaft can be used for general formula hand drill chuck, it can also be used for electric screwdriver.
- BRAND NEW - 100% brand new high quality flexible shaft bits, strictly full tested to ensure the best quality before shipment, safe to use.
- PRACTICAL - The design is clever, suitable for all kinds of dead corners, practical and wide application. Flexible shaft head can be mounted hexagonal shank (1/4 handle).
Check StockTB Woods 3020 TL302050MM Taper Lock Bushing, Cast Iron, 50 mm Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway
- Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
- Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
- Cast iron for resistance to wear, galling, and corrosion.
- Keyed to the shaft to prevent the shaft from rotating in the bushing.
- Interchangeable with taper lock bushings from various manufacturers.
Check Stock
