Categories

Best Shaft Mounted Speed Reducer

Walter 12D013 Mounted Point - A-3 Type, A36 Grit Abrasive Grinding Bit for Die Grinders, Pointed Grinders, Shaft Machines

  • Abrasive Grinding: the mounted point is made from finest abrasive grain to ensure long life and a uniform finish. This grinding bit delivers smooth operations with superior performance.
  • Functions: the grinding mounted point is used for fitting, shaping, enlarging holes and other finishing tasks. The unique design of the abrasive point makes it suitable for fine grinding even in confined spaces.
  • Applications: this abrasive mounted point is designed to fit die grinders, point grinders and other flexible shaft machines. The abrasive grinding point is dressed for perfect balance without run-out or vibration.
  • Features: allow the abrasive grinding bits to cut faster and produce a better surface finish. You can use the dressing stones to extend the tool life.
  • Specifications: the finishing mounted point with 1 in. diameter and 2-3/4 in. length is extended by precisely centered 1/4 in. shaft. The metal grinding bit can be used on stainless steel at a maximum speed of 16100 rpm.
Check Stock

Gryphon Studio Stained Glass Grinder

  • ...Mini Automatic Portable Stained Glass Grinder Water Ceramic Glass Machine DIY Desktop Grinding Tool.
  • ►Easy to operate：Before installation of grinding wheel, topped with lubricant, engine shaft grinding wheels need to apply a layer of lubricant inside.The grinding wheel mounted to the engine shaft, the fixed screw position higher than the engine shaft. The position of the grinding wheel on the axle must be at least 1/8" diamond part above the operating table.Fixed grinding wheel on the shaft with hexagonal wrench clockwisely..
  • ►Safety Use：Voltage: 110V, 0.1A,Power: 65W,Rotating speed: 4200r/min,Color: Red,Inside the rotary shaft (the fine shaft of the grinding head) diameter: 0.7cm, Grinding wheel inner diameter: 0.79cm.
  • ►Multifunction：Suitable for grinding glass,ceramics and other hard and brittle material.Mini size and easy to carry.Stable and reliable performance.Automatic water available for some sizes(5/8” 1”).New design switch avoid electronic conduction.Glass, ceramics, such as grinding hard brittle materials.Grinding variety of geometric shapes: plane, curve, rounded corners, slope, etc..
Check Stock

Cutex Speed Reducer (2' and 6' Pulley) for Industrial Sewing Machines

  • Speed Reducer For Industrial Sewing Machines..
  • Adds torque and allows you to gear down sewing speed from 1/3 of your machine's rated speed..
  • To be installed under sewing machine table, between machine handwheel and motor pulley..
  • Recommended to use on heavy duty leather or upholstery sewing machines for more torque and better stitch control..
Check Stock

Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project

  • INDUSTRIAL ROBOT SPARE PARTS: The worm drive has a simple, compact, small size and light weight. Simple structure, easy installation and disassembly..
  • WORM GEAR: If you need more torque or slower output speed, it can be used to replace the 4:1 worm gear that comes standard with the worm gear box. Again, this unit reduces backdrive to almost zero..
  • NOTE: The worm gear is mounted on a 4.7mm D-shaft diameter. The worm is mounted on a 6mm or 4.7mm diameter D-shaft..
  • HIGH QUALITY MATERIAL: The worm is made of metal, and the worm wheel is made of bronze, which has impact resistance, high temperature resistance, corrosion resistance and long service life..
  • PARAMETERS: The gear ratio is 20:1, which is suitable for building industrial robots with various functional shapes..
Check Stock

US STOCK M3-M16 Drilling Tapping Machine Tap Collets 1100mm Electric Tapper Machine Threading Machine

  • Tapping angle: Universal.Rotation Speed: 0-312r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
  • Standard Accessories Tapping Arm (One Set) Servo Motor And Reducer ( One Set).Tap Holder M3-M16 (One Set) Universal Joint(Tapping For a Vertical/Horizontal ) Optional Accessories：Magnetic Base 300KG (Tapping An Arbitrary Range) Moving Workbench (Mobile Tapping Machine ).
  • Applicable Materials: Aluminum, Copper, A3 steel, 45 steel, Cast Iron, Pig Iron, Q235, S136, mold steel, 718H, 40Cr, Stainless Steel and other metal materials.
  • Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
  • Main Parts(No console):Import Servo Motor+Enhanced Reducer + Touch Screen Control System+High-precision Cantilever Bracket+Import Tap Collet(Standard)+Universal Joint(Tapping for a Vertical/Horizontal).
Check Stock

On-Stage MS9212 Heavy-Duty Low Profile Microphone Stand with 12\ Base

  • A top-of-the-line round base microphone stand made from heavy-duty materials and built to last.
  • Offers pro-level features, including a 12" base with unmatched stability to handle the heaviest microphones and longest boom arms.
  • A reducer at the top of the upper shaft makes the MS9212 compatible with all standard 5/8"-27 threaded mic clips and boom arms.
  • The clutch acts as a brake on the upper shaft, even when loosened, preventing the shaft from crashing down while adjusting.
  • The upper shaft features an oversized knurled locking washer that keeps any attached mic clip exactly where desired.
  • A solid M20 steel lug and locking washer combo provides fast assembly and security, while extending thread wear beyond fine-thread designs.
  • Superior stability is achieved thanks to a sleek, embossed base with rubber pads, which absorb vibrations and protect floors.
Check Stock

5/8\ Take-up Ball Bearing Unit UCT202-10

  • Standard-duty mounted spherical roller bearing with take-up block housing.
  • Cast iron for rigidity and vibration damping with powder coating for resistance to corrosion.
  • Set screw locking collar for secure attachment to shaft.
  • Clearance seal for resistance to contaminants.
Check Stock

1/2\ Take-up Ball Bearing Unit UCT 201-8

  • Heavy-duty mounted spherical roller bearing with take-up assembly.
  • Cast iron for rigidity and vibration damping with powder coating for resistance to corrosion.
  • Two set screw locking collars for secure attachment to shaft.
  • Spring-loaded, heavy contact seal for resistance to contaminants.
Check Stock

Motivecare 1/2 inch Square (F) Socket -003e 1/4 hex (F) Quick Change Shaft Impact Adapter - Reducer Size Changer Converter Impact Wrench

  • NEW - 1/2" Square (F) Socket to 1/4" Hex QUICK CHANGE Shaft (F) Impact Adapter/Reducer.
  • Easily use your 1/2 inch impact Wrench with 1/4 hex quick change shaft bits and drivers.
Check Stock

Driving Tune

  • Works with G29 and G920 Driving Force Racing Wheels: Driving Force shifter is designed for both G29 and G920 Driving Force racing wheels, to enhance the latest PC and console racing titles..
  • Quality Construction: With a solid steel gear shaft, Driving Force shifter is built for precision racing and long-lasting reliability. The knob and boot are covered in high-quality, hand-stitched leather..
  • Six-Speed Shifter with Push-Down Reverse: The six-speed “H” shifter moves fluidly and solidly clicks into each gear, helping you execute smooth, accurate gear transitions on hairpin turns and straightaways..
  • Secure Mounting: Durable built-in clamps and bolt points allow Driving Force shifter to be mounted securely to a table or racing rig, to minimize shifting or wobbling during aggressive race maneuvers..
  • Compatible with PlayStation 5/4, Xbox One, Windows 8.1, Windows 8, or Windows 7, games that support Logitech force feedback racing wheel.
Check Stock

VEVOR Pipe Tube Bender, 9 Round and 8 Square Die Set Electric Pipe Tube Bender 1.5KW Multi-function Electric Pipe Bender

  • Copper Coils Motor: High conductivity of copper means that components can be made smaller and kept closer together, ensuring much higher efficiency. Power: 1500 W, Voltage: 110 V, Rotary Speed: 1400 RPM..
  • Adjustable Bending Radian:This exhaust pipe bender features a high-quality and flexible upper shaft, which can help bend pipes to any radian required..
  • High-Accuracy Die Sets:This pipe bender comes with 9 round die set & 8 square die set, high precision, and super-sturdy. Round Formers(in): 5/8"~3".
  • Reinforced Chain Design:Thickened and widened anti-rust chain can extend this conduit bender's operating life to a large extent..
  • Simple & Safe Operation:The tube bending machine uses a turbo reducer to drive, rolls and bends back and forth, simple to operate, with full cover design, much safer, ideal for construction and decoration business..
Check Stock

INTSUPERMAI 2L Rotary Evaporator Lab Rotary Evaporators Heating Bath Evaporation Apparatus with Manual Lifting Rotavapor with Digital Screen 0-120 R/min Rotary Vacuum Evaporator Type RE201

  • ...one adopts double line convection principle, used for inorganic solvent evaporation. The other is a single line container with a interlayer cooled by water and dry ice, used or evaporating the organic solvent. Using vertical condenser to save space..
  • √. The motor of this Evaporation Apparatus is equipped with Gear reducer, which is 3 times of the original motor torque, high power and has real-time speed digital display, and this equipment is also equipped with overload protection function to avoid overload of the governor caused by material viscosity..
  • √. Rotary evaporators are mainly used for concentration, crystallization, drying, separation, and solvent recovery in the chemical, and biopharmaceutical industries..
Check Stock

TSI Products, INC SCC7701 Climate Caddy 48V Electric Golf Cart Heater and Fan, White, Large

  • UNIVERSAL FIT: With the universal mounting brackets, you can install this fan up high or down low in your golf cart or UTV (Compatible with EZGO, Club Car, Yamaha, Polaris, Can Am, and more!).
  • MAXIMUM ADJUSTABILITY: Designed with dual air inlets and two louvered vents that deliver 310 Cubic Feet of air every minute for maximum comfort.
  • EASY TO INSTALL: Full color instructions plus universal mounting brackets included for flexible installation options with minor drilling required.
  • VARIABLE SPEED CONTROL: Automotive-style fan with three speed options let you control your environment and keep cool in the heat.
  • BUILT-IN VOLTAGE REDUCER: Convenient built-in voltage reducer for installation on golf carts with 12-48 Volt Systems (Gas and Electric).
Check Stock