Categories

Best Shaft Wheel

Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913

  • Dryer Blower Squirrel Cage Fan Wheel for Maytag Y-303836 3-12913.
  • This Bower Wheel / Squirrel Cage fits Maytag dryers..
  • Measurements: 7 1/2" Diameter and 3 1/8" deep also Fits 1/2" "D" shaft.
  • motor, 1/2" shaft diameter w/ a flat side on the shaft..
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

Bike Axle CYSKY Quick Release Skewer Front Rear Bicycle Axle Wheel Hub Fit for Road Bike Mountain Bike MTB BMX 1 Pair

  • Made of Iron, durable and practical for most bikes.
  • Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel..
  • Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3".
  • Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 19cm / 7.48".
  • You can use it to repair your mountain bike quickly. Perfect for cycling lovers, your best choice..
Check Stock

Free-fly MTB Quick Release Bicycle Hub Road Mountain Bike Front & Rear Axle Hollow Shaft Set with Standard Spacing 1 Pair 4 Piece

  • Made of Iron, durable and practical for most bikes.
  • Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3".
  • Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 19cm / 7.48".
  • The quick release skewer weight: approx. 270g / 9.2oz, color: black.
  • Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel..
Check Stock

CNBTR 0.5 Modulus Brass Metal Speed Reducer with 60 T Wheel 5mm Bore Gear Shaft

  • [Product Type] Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch, Gear: 31x12mm/1.22x0.47inch (DxH). Size 2: Brass Gear Shaft: 0.5 Modulus, Hole Diameter: 5mm/0.2inch, Overall Length: 20mm/0.79inch..
  • [Material] Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
  • [Function] The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • [Package] The item contains one 0.5 modulus brass worm gear shaft and one 60T brass worm gear wheel..
  • If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer..
Check Stock

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Steel - 1set

  • 【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
  • 【Function】This 5/8" Buffing Wheel shaft extender is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
  • 【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
  • 【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
  • 【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....
Check Stock

HOBART Worm Wheel with Bushing Assembly 00-124751-3

  • 1. This brass gear shaft kit is made of high quality brass, which is strong and durable and has a long service life..
  • 2. The rotating structure of the brass gear shaft is simple and compact, small in size and light in weight..
  • 3. Sizes of gears: 12x16x4mm/0.47x0.63x0.12inch (H x OD x ID).
  • Sizes of gear shafts: 20x11.7x6mm/0.79x0.46x0.24inch (H x OD x ID).
  • 4. The set include one 0.5 modulus 6mm hole dia brass gear shaft and one 30T brass gear wheel..
  • 5. Package includes: 1x Brass Wheel, 1x Brass Gear Shaft, 2x Screws..
Check Stock

Rear Brake Master Cylinder & Caliper Replacement for Chinese Dirt Pit Bike Baja SSR 70cc - 200cc with 12mm Wheel Shaft

  • Fit for 12mm Rear Wheel Shaft, NOT fit 15mm Rear Wheel Shaft Bikes..
  • Complete rear brake master cylinder caliper assembly with brake fluid and brake pad installed..
  • The brake comes with 1 pair of free extra brake pad..
  • For 70CC 90CC 110CC 125CC 140CC 200CC dirt bikes, pit bikes with 12mm rear wheel shaft..
  • Please take measurements and confirm before purchasing. Banjo Bolt Size: M10X1.25 (Thread diameter: 10mm, pitch: 1.25mm).
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

3" Multipurpose Mini Bench Grinder Polisher with 31" Long Flexible Shaft and Accessories, Variable Speed Dial 0-10000 RPM, 110V 150W Single Phase Motor

  • 150W 3 inch Mini Bench Grinder Polisher 110V 60Hz high-speed single phase motor, speed control range 0-10,000 RPM.
  • The mini bench grinder is with a 31" flexible long-arm flex shaft to work in hard-to-reach surfaces..
  • Flex shaft collet size: 1/8", wheel arbor size: 10mm/0.39".
  • This powerful and portable 3" mini polisher is with variable speed control for buffing,grinding, deburring and fine carving.
  • You will get 1 pc mini bench grinder, 31" flex shaft , 3" grinding wheel, 3"fiber polishing wheel, necessary tools and manual..
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

vanpro DIY Electric Skateboard Brushless Motor Mount Bracket /80MM 90MM 97MM 100MM Pulley Wheel KIT Belt 5M

  • Please note that it is only suitable for square truck rods..
  • The aperture of the small synchronizing wheel: 8MM/0.315 IN (please confirm whether the diameter of the motor shaft is 8MM)..
  • Please confirm whether the hole pattern of the PU wheel is suitable, the cruiser flywheel, diameter: 83/90/97/100MM, width: 52MM. 6 rectangular wheel....
  • only suitable for 50 series (5065) brushless motor, hole-fixing spacing of flat screws on motor shaft end: Φ30.0* 30.0..
  • 5M HTD Belt, width: 10MM, circumference: 255MM, pulley wheel ratio: 36/12 5M HTD..
Check Stock