Best Shaft hub Connections

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

The ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle

  • The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Inch, 2\ shaft diameter, 3.150\ Outer Diameter of Shaft Locking Device, 1870 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

AlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts

  • The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
  • Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
  • Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
  • This kit is used for many Drift Trike Bikes.
  • Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 85 mm shaft diameter x 125mm outer diameter of shaft locking device, 6033 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 60 mm shaft diameter x 90mm outer diameter of shaft locking device, 2091 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1350 Series Shaft Locking Device, Metric, 65 mm shaft diameter x 95mm outer diameter of shaft locking device, 2265 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Axial hub can move during clamping for positioning shaft.
Check Stock

Lovejoy 1900 Series Shaft Locking Device, Metric, 12 mm shaft diameter x 18mm outer diameter of shaft locking device, 41 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Expands to fill gap between shaft and hub for easy installation and removal.
Check Stock

Lovejoy 1900 Series Shaft Locking Device, Metric, 11 mm shaft diameter x 18mm outer diameter of shaft locking device, 37 ft-lb Maximum Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Expands to fill gap between shaft and hub for easy installation and removal.
Check Stock

Lovejoy 900 Series Shaft Locking Device, 44 mm (1.732\) hub OD Diameter, 1.250\ to 1.496\ Shaft Diameter, 454 to 719 ft-lb Max Transmissible Torque

  • Shaft locking device for connecting a hub to a shaft in power transmission applications.
  • Screw tension creates interference fit for zero backlash.
  • High contact pressure for transmitting greater torque.
  • Self-centering for concentric tightening.
  • Expands to fill gap between shaft and hub for easy installation and removal.
Check Stock