Categories

Best Shaker Door Router Bits

SKIL SRT1039 Benchtop Portable Router Table

  • ABOVE THE TABLE ROUTER LIFT: Gain convenient access to router bits with the Above Table Adjustment provided by the SKIL SRT1039 all-inclusive Router Table.
  • INTEGRATED BIT STORAGE: Protect and store router bits with a double door, quick latch integrated bit case. This integrated bit storage saves you time and provides a central location for easy to lose bits.
  • PRECISION ROUTING: Router tool features a flat laying aluminum miter gauge slot, aluminum mounting plate, router clamp, and two featherboards for durable, accurate routing.
  • LARGE ALUMINUM FENCE: The tall 16-inch aluminum fence measures 24 inches wide and can handle tall stock with ease, while the fence is complete with adjustable MDF face plates and a starter pin and guard for smooth operation with taller work pieces.
  • TWO FEATHERBOARDS: Two easy to use, adjustable router edge guides attach to the fence and router table to provide additional guidance and protection against kickback.
  • ROUTER CLAMP: Allows you to easily access tools attached underneath the table.
Check Stock

WORKPRO 15-Piece Router Bits Set, 1/4-Inch Shank Tungsten Carbide Router Bits for Woodworking, Solid Woods, Hard Woods, Chipboard, MDF, DIY, and Carpenter

  • 【VERSATILE ROUTER TOOL SET】The set includes 1/4 inch router bits set, that is dovetail bit, mortising bit, panel pilot bit, cove bit, 4* straight bit (1/8'', 1/2'', 1/4'', 5/8''), roman ogee, 2* cove box bit (R1/4'', R1/8''), 45-degree chamfer, flush trim, confer round, 90-degree "V" grooving bit and storage case.
  • 【SHARP&DURABLE】Carbide router tips head, precisely machined, sharp, and heat-resistant, last 80-90 percent longer than HSS bits. With two cutting edges, the router bits set surpass single-edge bits in making smooth cuts. The inclined angle facilitates the removal of wood chips.
  • 【SAFE FOR USE】These bits with plenty of metal behind each cutting edge.
  • Anti-kickback design prevents kickback caused by fast feeding and deep bites. What's more, the 1/4 inch shank bits provide greater stability and less vibration during operation.
  • 【EASY TO STORE&CARRY】Storage case with identification for easy access and organization. The case also helps protect the router bits while on the travel or during working time.
  • 【WIDELY APPLICATION】Effective for edging, trimming, veining, and grooving all types of wood.
  • perfect for door panels, picture frames, plywood, and other carpeting projects. Suitable for the hobbyist and for light work.
Check Stock

WSOOX 1/4 Inch Shank 45 Degree Lock Miter Router Bit Set, 3pcs Joint Router Bits, Wood Milling Cutter Glue Joint Tools Set (for Cutting 1/2Inch, 3/4Inch, 1Inch Wood Stock)

  • ⭐【Applications】45 degree lock miter router bit could be used for cabinet doors, closet door ,window, wood drawer, window, cupboard and other woodworking projects. Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints..
  • ⭐【Premium Material】These lock mitre router bits made of YG6 carbide alloy steel, with high hardness, and the heat treated blade is sharp and smooth. The coated surface, it's rustproof and has a long service life..
  • ⭐【Cutting Smooth】Carbide tipped router bits retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds, the inclined angle facilitates the removal of wood chips. Router bit has shear angle technology, which can improve cutting quality, speed and extends service life..
  • ⭐【Compatible Machines】These 45 degree lock miter router bit with 1/4 inch shank, is suitable for all range’s handheld router and table router..
  • ⭐【After-sale Service】WSOOX tools store provide affordable and quality router bits for customers, if you have any questions about our router bits, please contact us feel free, and we will reply youw within 24 hours..
Check Stock

Hymnorq 1/2 Inch Shank Dovetail Router Bit Set of 5PCS to Fit Most Jigs and Make Strong and Beautiful Dovetail Joints for The Construction of Boxes Drawers Chests and Fine Casework in Woodworking

  • QUALITY - Solid hardened steel bodies with anti-kickback design and C3 micro-grain tungsten carbide 2-flute cutters with heat resistant anti-stick....
  • MULTI APPLICATIONS - Make creative, decorative glue joints for drawers and jewelry boxes, shaker furniture and shadow boxes, sliding dovetail joints....
  • Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits can produce unique finger pulls..
  • FIT MOST JIGS - Wether you are using Akeda, Leigh, Incra, Porter Cable, or Keller Jig, this set of dovetail router bits will surely fit your jig and....
  • 5PC SET - The set includes 5 pieces of 1/2” shank dovetail router bits. Cutter diameters are 1/4", 1/2", 3/8", 5/8" and 3/4". Suitable for wood,....
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

DBoyun 3pcs/Set Classical Extended Tenon Entry Door Rail and Stile Router Bit Set Woodworking Milling Cutter Door Frame Tenon and Knives Cutting with 1/2\ Shank

  • Using for hand-making a door or other woodworking..
  • Solid Hardened Steel Bodies with Anti-Kickback Design..
  • This 3 bit Ogee entry door Router bits set can cut rails and stiles between 1-3/4" and 1-3/8" thick.
  • Baked on heat resistant coating prevents build-up of sawdust, resin, and pitch..
Check Stock

10-Pack Roto-Zip X-Bits for Drywall Routers and Roto Tools - 5/32" Guide-Point Cutout Bits PLUS 3-Piece Collet and Nut Set

  • 5/32" GUIDE-POINT BITS FOR DRYWALL CUTOUT - make faster cuts from outlets, window, door openings.
  • INCLUDES REPLACEMENT COLLET KIT with 3 collets - 1/8", 5/32", 1/4" and replacement nut to accommodate many sizes of router bits.
  • HIGH SPEED STEEL LASTS 5X LONGER AND CUTS 2X FASTER than standard bits.
  • ROTOZIP IS THE CHOICE OF PROFESSIONAL DRYWALLERS FOR QUALITY, DURABILITY AND RELIABILITY - XBits offer increased performance and durability over standard router bits.
Check Stock

Router Bit Storage Tray - Foam Material for Safe Router Bit Storage, 1-5/16 inch Thick and Stores 60 1/4 inch and 50 1/2 inch Shank Router Bits

  • We have all experienced the same issue. We start collecting router bits and little by little we realize that we have nowhere to put them. To even further complicate things, our router bits are both 1/4″ and 1/2″ shanks!.
  • We could always make our own storage out of a piece of wood, but the problem with that is the wood, wears and starts to slip after a while..
  • The 1-5/16″ thick foam router bit tray is a perfect storage solution for all those heavily used router bits that are currently in your drawers, on your shelves or in the router itself..
  • The foam router bit tray fits up to 50 each 1/2″ and 60 each 1/4″ shank bits giving you the ability to store up to 110 router bits in one convenient spot. The holes in the tray wrap neatly and snuggly around the bits to keep them from moving around and keep them out of harms way..
  • Wether you have 100 router bits or just a few, the foam router bit tray is and economical and effective way to keep your bits safely stored away when not in use. ROUTER BITS NOT INCLUDED.
Check Stock

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • ...cessory to have on hand for cutting and installing door hinges of round or sqaure corner hinges. This jig allows you to cut professional looking mortises in the doors of hinge from 3” to 5“ length and 1/4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of sturdy plastic material and silicone anti-skid pads on both sides, this door hinge mortiser template is stable enough and will n....
Check Stock

TOOLDO 45 Degree Lock Miter Router bit 1/2 Shank,Lock Miter Woodworking Tools Set (for 1/2\

  • TOODLD 45 degree lock miter router bit 1/2 inch shank is suitable for all range’s router(handheld router and table router), such as TOOLDO, KOWOOD, Bosch, DeWalt, Makita,Milwaukee, MNA,Porter & Cable, Skil, Ryobi, Black & Decker.
  • Carbide-Tipped Bits- Carbide tipped bits retain their cutting-edge hardness at high machining temperatures generated by high cutting speeds and feeds that reduce machining cycle time.
  • Shear Angle Technology-TOOLDO router bit has shear angle technology, which can improve cutting quality, speed and extends service life. The inclined angle facilitates the removal of wood chips.
  • Widely application-Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints.Ideal for 45 Degree Lock Miter joint, and cutting all types of wood,MDF, particle board, plywood compact panel. Perfect for the production of cabinet doors, closet door ,window, wood drawer, window, cupboard and other woodworking projects.
  • Affordable – Direct Sale from manufactory, provide the best cost but remain in great quality.If you encounter problems during use, please contact customer service, we will help you answer in time.
Check Stock

Flytuo 6PCS 90 Degree V Groove and Round Nose Router Bit Set 1/4 Shank, Carbide 3D CNC Signmaking Lettering Engraving Router Bit, Woodworking Carving Cutting Tools

  • Durable Material&Construction: These V Groove Router Bits and Round Nose Bits, are made of high-quality tungsten steel alloy and high-tech special grinding process, whose blade has high strength and hardness, sharp and wear-resistant.
  • Precision&Neat Cuts Every Time: Including 3Pcs 90 Degree V-Groove Router Bits + 3Pcs Round Edge Groove Router Bits, smooth and no burrs, 6 pieces in total makes clean and accurate cuts on wood.
  • Versatile Woodworking Tool Kit: Complete your hardwood tool collection with 3Pcs 90 Degree V-Groove Router Bits and 3Pcs Round Nose Groove Router Bits.
  • Package Included: 3Pcs 90 Degree V-Groove Router Bits - 1/4" Shank, Cutting Diameter: 1/4", 3/8", 1/2".
  • 3Pcs Round Nose Groove Router Bits - 1/4" Shank.
  • Widely Applications: These tongue and groove router bit set is truly versatile for your extra convenience. Works great with woods, MDF, particle board, plywood compact panel. DO NOT cutting ferrous metal and non wood materials, such as: steel, iron, sand, etc.
Check Stock

42950 1/2- inch Router Collet Fit for PORTER CABLE models, Delta, B&D

  • ⭐Features: | For use with 1/2" shank router bits | 1/2" Router collet for use as a replacement or adapter.
  • ⭐Auto-release design prevents "frozen" bits | Accepts 1/2" shank router bits | Auto-release design prevents router bits from sticking in the router.
  • ⭐Designed to minimize bit run-out and enhanced robustness | Helps decrease the amount of lost bits.
  • ⭐Specifications: | Material: Steel | Color: Black | Diameter(in): 0.5" | Outside Diameter(in): 0.5".
  • ⭐Collet Nut size: 1/2" | Length(in): 1.5" | Threads: 20tpi.
Check Stock

Yonico Router Bits Set Exterior Door Rail and Stile Extended Tenon 3 Bit Classical 1/2-Inch Shank 12346

  • This 3 bit ogee entry door router bits set can cut rails and stiles between 1-3/8" and 1-3/4" thick. Cutting depth is 1/2" and the shank is 1/2"..
  • Create rail and stile entry door frames with extended tenons.
  • Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
  • Silver induction brazing for maximum strength and durability.
Check Stock