Categories

Best Shank Adapter

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

  • ...ction head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
  • ☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
  • ☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • ☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

Megadream Xbox One Wireless Chatpad Keyboard with 3.5mm Audio Jack for Xbox One/One S/One X, Xbox Series S/X, Xbox One Elite/Elite 2, PC – 2.4G USB Receiver & Charge Cable included

  • VERSATILE ADAPTER. This trailer hitch adapter easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-inch receiver and accepts a 1-1/4-inch shank.
  • ADDED CLEARANCE. This hitch receiver adapter also functions as a trailer hitch extension, adding 4 inches of extra length to your hitch receiver. This provides additional clearance between your bumper and hitch accessory or trailer.
  • STANDARD FIT. This trailer hitch receiver adapter has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver. It also accepts any industry-standard 1-1/4-inch x 1-1/4-inch shank.
  • SOLID STRENGTH. This hitch receiver adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight.
  • CORROSION-RESISTANT. This trailer hitch reducer is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
Check Stock

Quick Release 1/2-Inch Square Drive to 1/4-Inch Hex Female Socket Impact Adapter Drill Chuck Set of 2 for Air and Electric Impact Wrench

  • 【Premium Material】: Made of high quality material for maximum strength and durability. Convert any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece chuck converter. Quick Release 1/2-Inch Square Drive to 1/4-Inch adapter securely holds any 1/4" hex-shank bit.
  • 【Easy to install】: Quick-release mechanism allows for easy, one-handed swapping between bits while working. This adapter with an impact wrench can take off any brake rotor screw in less than ONE second.
  • 【Perfect Experience】: Quick-release mechanism allows for easy, one-handed swapping between bits while working, fits tightly both ends, firm grip onto the drill, and holds the bit nicely. Adapter securely holds any 1/4" hex-shank bit (including insert bits).
  • 【Safe Operate】: Quick Release & Security Lock Design: 1/2 Inch Square Female to 1/4 Inch Hex Female Socket Adapter. The quick release made it very easy to swap between the screwdriver bits, drill bits with hex shank, or socket adapter.
  • 【Service】: Thank you for choosing our product. If the product has any quality problems ,please feel free to contact us before making an evaluation. Thank you for your cooperation. We offer 24 hours customer service to convenient for customers.
Check Stock

Drilax Core Drill Bit Arbor Adapter for Threaded Diamond Hole Saw 3/8 Triangle to 5/8 11 Male Drill Sanding Attachment Arbor Shaft Adapter

  • STANDARD DRILL CHUCK Adapter for 5/8-11 threaded core bits to regular 3/8 inch shank. Also known as the 5 8 male adapter or core bit adapter or arbor....
  • Arbor adapters CONVERT and TRANSFORM - 5/8" - 11 Thread to 3/8 inch Triangle Shank for Standard Drill Use For marble polishing kit, polishing wheel....
  • Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond....
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects....
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now....
Check Stock

CURT 45405 Trailer Hitch Receiver Adapter Reducer Sleeve, 2-1/2 to 2-Inch

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 2-1/2-inch receiver and accepts a 2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter measures 2-1/2-inch x 2-1/2-inch to fit any industry-standard 2-1/2-inch trailer hitch receiver. It also accepts any industry-standard 2-inch x 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve is fast and easy. You can use it as needed by simply inserting it into your hitch receiver (hitch pin sold separately). Then, hitch up your trailer or hitch accessory.
Check Stock

SHDIATOOL Core Drill Bit Adapter 5/8 -11 Thread Male to SDS Plus Shank

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM，pitch : 2.309mm..
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

DeVoNe Dusty Diamond's All-Star Softball 72 Pins 8 Bit Game Cartridge (Gray)

  • 1pc Adapter for 5/8-11 to SDS Plus Shank for diamond core bit.
  • 5/8-11 male thread, Total length 72MM, shank length 45MM.
  • 5/8-11 UNC thread core bits can be fitted on Hammer drill or electric drill with SDS arbor.
  • We provide 100% refunding or replacement if there are any quality problems.
Check Stock

CURT 45408 Trailer Hitch Receiver Adapter Reducer Sleeve Set, 3 to 2-1/2 or 2-Inch, 2-Piece

  • VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.
  • STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank.
  • SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch.
  • CORROSION-RESISTANT. This trailer hitch reducer sleeve set is finished in a highly durable black powder coat to withstand rain, dirt, UV damage and other corrosive threats.
  • EASY TO INSTALL. Installing this trailer hitch reducer sleeve set is fast and easy. You can use each of the included reducer sleeves as needed by simply inserting them into your hitch receiver (hitch pin sold separately).
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

MINLAYCUT Diamond Core Drill Bits Set - 10pcs Tile Hole Saw Kit 6/8/10/25/35/50/65mm with 2' Diamond Beveling Chamfer Bits for Porcelain Ceramic Tile Granite Marble

  • 10pcs in total,7pcs(6/8/10/25/35/50/65mm) Diamond drill bits,1pc 10mm Diamond Finger Bit,1pc 2" Diamond Beveling Chamfer Bits and 1pc 5/8-11 to SDS Shank Adapter.
  • Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick....
  • Maximum RPM is 11000. All bits are produced in Vacuum Brazed technology..
  • The connection of all bits are 5/8"-11 arbor and suitable for 5/8"-11 angle grinder；.
  • If you fit them on electric drill or other machine, you need an adapter such as Hex Shank or SDS Plus Shank..
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock