Best Shank Slotter

Husky 67123H 7-Piece Precision Screwdriving Set for Jewelry and Electronics w/ Swiveling End Cap and Ergonomic Composite Handles

• 7 PHILLIPS HEADS: 2 x #0 (1.5”, 2.5” shank), 1 x #1 (3” shank), 3 x #2 (4”, 6”, 8” shank), 1 x #3 (6” shank).
• 8 SLOTTED HEADS: 1 x 1/8“ (2.5” shank), 3 x 3/16” (4”, 6”, 8” shank), 2 x 1/4“ (4”, 6” shank) 2 x 5/16” (6”, 8” shank).
• IDENTIFICATION MARKINGS are molded into the handles, so you’ll be able to quickly pull the correct tool from your bag or belt.
• DUAL MATERIAL HANDLE allows for an easy grip. The textured material will give you precise handling, even in slippery conditions.
• HEAT TREATED STEEL ALLOY prevents cam out when tightening fasteners on the jobsite.

DEWALT DW5224 1/4-Inch by 4-Inch Carbide Hammer Drill Bit , Silver

• ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
• Four flute design cleans debris out for fast, efficient drilling.
• Three flats on shank eliminate bit slipping in chuck.

DEWALT DW5223 3/16-Inch by 6-Inch Carbide Hammer Drill Bit,Silver

• ROCK CARBIDE tip maximizes carbide surface contact for longer bit life..
• Four flute design cleans debris out for fast, efficient drilling.
• Three flats on shank eliminate bit slipping in chuck.

3/8-Inch Shank Serrated Edge Forstner Drill Bit

• 3/8-Inch Shank Serrated Edge Forstner Drill Bit.

Klein Tools 600-4 1/4-Inch Keystone Cushion-Grip Screwdriver

• Heavy-duty square shank for wrench-assisted turning.
• Cushion-Grip handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance.
• Interl flanges inside handle provide solid, twist-resistant blade anchor.
• Overall length: 8-11/32-Inch, shank tip width: 1/4-Inch, shank length: 4-Inch.
• Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product.

3/8-Inch by 1/4-Inch Shank Serrated Edge Forstner Drill Bit

• 3/8-Inch by 1/4-Inch Shank Serrated Edge Forstner Drill Bit.

DEWALT Jigsaw Blades Set with Case, T-Shank, 14-Piece (DW3742C)

TINVHY C1 ER32 4In Long Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder

• 4Inch shank holding all ER32 collets (Clamping range up to 1In).
• Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
• Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
• Widely used in boring, milling, drilling, tapping, grinding and other processing.

Low Shank Ruler Foot, Free Motion Darning Foot, 1/4 Inch Round Open Toe Quilting Ruler Foot, for Singer, Janome, Viking, Brother, Kenmore Low Shank Machines

• Ruler Foot Low Shank: Quilt beautiful designs using rulers and acrylic templates with the Open Toe Ruler Foot. This 1/2” wide foot is designed to give you a 1/4” radius from the needle and the 3/16” height of the foot allows for stability when using low shank style rulers..
• Quilting Ruler Foot Low Shank: Attach the foot to the machine and adjust the height so when the foot is in the down position it skims lightly over the surface of quilt..
• Sewing Machine low Foot: This thinner, open toe foot gives you full visibility of the needle. It's great for applique, thread painting, and artistic quilting where precision is paramount..
• Low Shank Machine Foot: The ruler quilting foot is made of sturdy metal and is designed with cutouts on the front and left sides for comfortable viewing of the needle area..
• Note: Low shank machines have less clearance behind the foot and under the presser foot bar - Low Shank Rulers are 3mm and the thinnest rulers to work with the Low Shank Foot (LS) and Medium Shank Foot (MS).

Klein Tools 6934INS 1000V Slim Tip Insulated Screwdriver, 4-Inch Round Shank, #2 Phillips Tip, Cushion Grip Handle

• Slim Tip Insulated Screwdriver #2 Phillips 4" Round Shank.

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

• HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
• TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
• MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
• STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
• 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
• 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
• 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
• 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
• 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

• HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
• TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
• SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
• INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
• MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
• 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
• 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
• 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.

Accusize Industrial Tools 20 Pc Hss Tin Coated End Mill Set, 2 Flute and 4 Flute, Cutting Diameter from 3/16'' up to 3/4'', 1810-0100

• high speed steel, Tin Coating. Straight Shank.
• One of each size in both 2 & 4 flute: with 3/8'' shank:3/16'', 1/4'', 5/16'', 3/8'', 7/16''.