Categories

Best Shaper Coping Sled

Woodpeckers Iron-Grip Coping Sled For Router Table, Precision Woodworking Tools

  • UPGRADED COPING SLED – The Iton-Grip Coping Sled improves on our ever-popular original Coping Sled and beefs it up with a stiffer base, larger fence guide and the Iron-Grip clamp..
  • CRYSTAL CLEAR FENCE – It is 3/8″ thick and 15-1/2″ long, making it ideal to work with any router table fence, whether it’s a Woodpeckers fence, another brand or one you’ve built yourself…it handles them all..
  • NEWLY DESIGNED BACK FENCE – It has a T-slot to mount a sacrificial backer. The backer prevents blow-out where the router bit exits your stock. Just chop the end off and slide the piece forward when you change projects. You’ll get three MDF backer boards with your Iron-Grip. When they’re gone you can make your own from scraps or we offer them in convenient 3-packs..
  • MADE IN USA – Like all Woodpecker products, the Iron-Grip Coping Sled is precisely machined and carefully inspected in our Strongsville, Ohio, manufacturing facility..
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

(Santa’s Got A) Rocket Sled on Rails

  • PRECISION: The size of the rail coping trolley is 375 x 152mm / 14.5 x 6 Inch, the rail guide coping sled is the router table accessory you need to make rail & style doors, tenons, lap joints. This full featured coping sled has a aluminum base that slides across your router table surface effortlessly. The unit also includes two large and sturdy handles for guiding the sled through the cutter..
  • USAGE: When building cope and stick door and drawer fronts, one of the tasks that must be done is to cut the end grains of your rails, the rail guide coping sled solves this problem, helps you make precise, square, clean cuts for rail and style doors, drawer fronts and most type of end grain cut on your router table..
  • PRACTICAL: Fix your rail firmly at a 90 degree angle with your router table fence, you can cut your stock into the cleanest and most square shape through the cutter. When narrow rails are often used on the front of the drawer, this sled can prevent your inventory from being immersed or pushed too far, and can also keep your hands away from injury..
  • STABLE: Add a separate sacrifice block in the sled to allowing you to start using your first profile. Sacrificial block is easily replaceable to accommodate different profiles. The abrasive belt can p....
Check Stock

Rockler Rail Coping Sled for Router Table – Round Handle Router Sled for Firm Grip – Toggle Clamp Features Easy Tool-Free Adjustments - Maximum Workpiece Dimension 5” Wide x 1-1/4” - Router Jigs

  • Coping Sled For Router Table: If you're building cope-and-stick doors and drawer fronts, our new rail coping wood sled will be an indispensable....
  • Smooth-Running Sled: With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the router fence, your rails....
  • Keeps Your Hands Safe: Particularly with drawer fronts, which sometimes use very narrow rails, the rail guide coping sled prevents parts from dipping....
  • Prevent End grain Blowout: A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the....
  • What’s Included? Our router table woodworking kit includes a Sled Base, Fixed Fence, Adjustable Fence, Lever Clamp, Sacrificial Piece, Front Handle,....
Check Stock

Router Table Coping Sled, Rail Guide Safety Coping Sled Router Table Tenoning Safety Pushing Clamp for Cutting Precise Joints for Cabinet Door Drawer Fronts Carpenters Woodpeckers Woodworking Tools

  • Clear Acrylic Fence: Our coping sled uses the fence as a reference instead. The rail guide coping sled features a clear acrylic fence for reference which is offset and raised 2″ above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence..
  • We have included a single sacrificial block with the sled to get you started with your first profile. The sacrificial block helps to prevent end grain blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • How It Works: Hold your rails firmly at a 90 degree angle to your router table fence so you can feed your stock through the cutter for the cleanest, squarest cuts possible. When doing drawer fronts which often times use very narrow rails, this sled will prevent your stock from dipping or pushing in too far and also keeps your hands away from harm..
Check Stock

Rockler 422866 Router Table Box Joint Jig

  • Fence constructed from MDF with low-friction melamine coating for easy sliding.
  • Precision-machined solid brass indexing keys ensure uniform finger spacing and airtight fit.
  • Cuts 6mm (1/4 Inch), 10 mm (3/8 Inch) and 13 mm (1/2 Inch) box joints on a router table.
  • Smooth-sliding sled features long skis that keep it square to the bit.
  • Ideal for creating coping joints for small and medium boxes and frames.
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...n the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order..
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • ...f extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to allow the sled to slide as desired..
  • The Miter T-Bar can also be mounted upside down by cutting a dado slot into your sled platform that is the same depth as the T on the Miter T-Bar. The Miter T-Bar will then act much more like a standard solid miter bar. Using this type of flush mount may work better in certain situations when compared to the traditional method..
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufactur....
Check Stock

IRWIN Tools Coping Saw Blades, Coarse, 3-pack (2014500)

  • Designed for use with your existing ProTouch coping saw.
  • Replace damaged or worn-out coping saw blades.
  • These coarse coping saw blades have a tooth count of 17 pt..
  • Use a coping saw for cutting the curved profile on crown, base or chair-rail molding.
Check Stock

FOXBC Coping Saw Blades 6-1/2 Inch, 18 Pack ( 15 TPI, 18 TPI, 24 TPI)

  • 15 TPI (6-Pack), 18TPI (6-Pack),18TPI (6-Pack).
  • Coping Saw Blade Used For Cutting Wood, Plastic, Bone, Leather, Rubber And Thin Mild Metals ..
  • 6-1/2 Coping Saw Blades fits Fret, Scroll, Jewelers and Coping Saw Blades & Frame Saw..
Check Stock

Coping Kit | 1¼ Inch by 8 Foot Sections | 8 Pieces | for use with Kayak Pools | for 12 Foot by 20 Foot Pool

  • REPLACE - This replacement vinyl coping is used to replace cracked and yellowed coping, for use with Kayak Pools manufactured between 1977 and 2002..
  • PURELY COSMETIC – This coping is just superficial as it does not actually hold up the liner..
  • SNAP INTO PLACE – The pool liner snaps into the top channel while the coping snaps onto the top channel..
  • SIZE – The Coping New Style is measured at 1¼ inches by 8 feet sections..
  • INCLUDED –This kit comes with enough 8' lengths of coping and the 4 corner caps for use with your 12' x 20' Kayak Pools..
Check Stock

Jewelry Hacksaw Handle Tool Kit, Jewelers Sawbow Saw Frame 12 Blades and Mini Bench Vise with Clamp Jewelry Making DIY Craft Tool

  • High-speed steel coping saw blades cut through most materials with ease.
  • A Flat-Bar frame and DuraSteel pins on this coping saw provide durable use.
  • This coping saw has an ergonomic ProTouch handle to give added comfort.
  • 5-1/2" frame depth and 6-1/2" blade length.
Check Stock

Collins Tool Company Coping Foot

  • Turns your jigsaw into a simple and accurate coping machine without the need for jigs and templates.
  • The Coping Foot is formed from 14 ga. plated steel. Youll wear out a couple of jig saws before you wear out your Coping Foot..
  • Fits most jig saws except for Porter-Cable, and the Bosch 1590 and 1591.
  • Will not work on Festool Carvex, get the Collins Festool Carvex Coping Foot instead.
Check Stock