Categories

Best Sheet Metal Clamp

Goldblatt 2 Pack Panel Carrier, Plywood Lifting Tool, Drywall Carrying Tool - Plywood Carriers Tool for Wood, Synthetic Cement Board - Clamping Thickness up to 3/4 inch

  • 【Handle with one hand】: This panel/plywood lifter has a durable, impact-resistant ABS handle, allowing a person to easily lift and carry the entire length of material with only one hand. The clamp can clamp up to two plates or panels at a time and can withstand a load of up to 200 pounds. Use this convenient sheet and panel mover to complete work faster.
  • 【Solid metal structure]】: This gypsum board fixture is durable and adopts a heavy-duty solid metal structure. The clamp and the handle arm are machined from aviation-grade aluminum, while the joints are made of solid steel bars. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality structure ensures that the tool can withstand violent lifetime use.
  • 【Self-adjusting clamp】: Autoly's device has a universal but simple design, allowing clamps to clamp various types of panels and sheet goods. Once you start lifting, the clamp will automatically adjust to the thickness of the panel or sheet. This innovative tool can fix up to two panels or sheets at the same time..
  • 【Easily carry on back】: It may be very difficult to carry slate, plywood and board. This handy tool can reduce your back pressure, allowing you to carry heavy objects with one hand. There is no need....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

  • ...or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
  • Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
  • Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work before the final welding. It can be installed and disassembled quickly, so it is also very friendly to beginners..
Check Stock

KAKA Industrial W-3616Z 36 Benchtop Pan and Box Brake Max Thickness 16 Gauge Mild Steel Capacity Angle 1-135 Degree Pan and Box Brake Machine

  • HIGH CAPACITY AND VERSATILITY. KAKAIND 36In pan and box can bends mild steels up to 16 gauge thick, 36-inches wide with angle 0-135 degrees. It is an ideal tool if you need to increase the strength of sheet metal plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, or fixtures. You can save more time on working and enjoy more family time.
  • HEAVY AND QUALITY CONSTRUCTION. KAKAIND 36-inch sheet metal brake pan and box is designed to be utilized after many years heavy use. It has a solid cast iron body to support the projects to be done easily. One can save few hundred dollars from a long term perspective.
  • ADJUSTABLE FINGERS. With removable and adjustable fingers, the KAKA hand brake can be installed in a variety of positions to accommodate varying widths of metal. Quick indexing of one or many fingers makes this the perfect machine for multiple applications. Achieve extremely sharp bends and easily adjust the fingers closer or farther from the point of bend..
  • HEAVY DUTY HOLD DOWN CLAMP LEVER. Bending sheet metal become a easy job with KAKA pan and box brake. The heavy duty hold down clamp lever allows for clamping and unclamping the sheet metal through the cam mechanism. This machine can do any professional bending wor....
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

Felled Timber Claw Hook, 28in - Log Lifting Tongs Heavy Duty Grapple Timber Claw, Lumber Skidding Tongs Logging Grabber

  • ...ant high-grade synthetic metal ensuring a strong traction.
  • Self-adjusting Gripper Clamp - Golablatt panel lifter features the firmly durable, impact-resistant fiberglass with rubberized TPU gripping pads mounted on both clamping plates increased friction of contact to prevent slipping and protect the surfaces of the sheet from being damaged.Suitable panel thicknesses up to 3/4 inch thick.
  • Safe & Energy-efficient - The weight is distributed evenly when the carrying clamp handle is placed centrally on the panel. The clamp grips tight as you lift. It allows you to lift and move sheet with a straight back, eliminating the requirement of bending over to get under the bottom. Less weight pressure with this tool and greatly reduced risk of injury to the back, neck, shoulders and arms.
  • Goldblatt Soft-Grip Handles - Ergonomic soft-grip handle that makes carrying sheets effort lessly and it easy for a single person to carry full sheets of material with only one hand. It can hold up to 2 panels at once, single accommodating loads of up to 100 pounds.
  • Professional Grade - Use the Goldblatt gripper to grip and carry MDO or MDF panels, drywall, plywood, tabletops, sheep metal, OSB, melamine and other sheet goods.
Check Stock

GEZICHTA Duvet Clips - Keeps Comforter from Shifting in Cover,4 Pack Duvet Pins,for Keeping Comforter from Shifting in Cover - Bedding Accessories,Stronger Than Traditional Duvet Fasteners

  • Premium Bed Sheet Holders - Enjoy a comfortable bed with the 5 STARS UNITED bed sheet holder straps! The set includes 4 triangle-shaped belts to securely hold each corner of your sheet in place. Our elastic bed sheet fasteners work for all sheet sizes from Twin to California King and ensure perfect tidiness in your bed. They also come in 8 colors – black, grey, white, beige, purple, yellow and US Flag #1, US Flag #2..
  • Made to Last - our fitted sheet elastic straps are made of elastic nylon for extended durability. The rust-resistant nickel-plated metal clips feature a built-in plastic clenching system to protect the fabric from damage. With our bedsheet holders, you will forget about loose sheets for good!.
  • Multipurpose – the 5 STARS UNITED sheet clips for bedding are suitable for all kinds of fabric, and fit all sorts of sheets, throw blankets, covers for sofas, ironing boards, tables, car/chair/scooter seats and more..
  • Easy To Install - 1) Open the clamp. 2) Put the fabric in the clamp. 3) Close the clamp to lock the fabric in place. Start by attaching the middle strap to the corner, then attach the side straps directly opposite to each other on both sides of the corner. Repeat for each corner. The fitted sheet holders are fully adjustable - tight....
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

  • Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
  • To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
  • For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..
Check Stock

Bed Sheet Straps Set 4 pcs - White Sheet Holders for Corners - Full Mattress Cover Fitted Sheet Clips to Hold Sheets in Place - Premium Nickel-Plated Bed Sheet Clips with Adjustable Bed Bands

  • Premium Bed Sheet Holders - Enjoy a comfortable bed with the 5 STARS UNITED bed sheet holder straps! The set includes 4 triangle-shaped belts to securely hold each corner of your sheet in place. Our elastic bed sheet fasteners work for all sheet sizes from Twin to California King and ensure perfect tidiness in your bed. They also come in 8 colors – black, grey, white, beige, purple, yellow and US Flag #1, US Flag #2..
  • Made to Last - our fitted sheet elastic straps are made of elastic nylon for extended durability. The rust-resistant nickel-plated metal clips feature a built-in plastic clenching system to protect the fabric from damage. With our bedsheet holders, you will forget about loose sheets for good!.
  • Multipurpose – the 5 STARS UNITED sheet clips for bedding work with all types of fabric, and fit all kinds of sheets, throw blankets, covers for sofas, ironing boards, tables, chair/car/scooter seats and more..
  • Easy To Install - 1) Open the clamp. 2) Feed the fabric in the clamp. 3) Close the clamp to lock the fabric in place. Start with the middle strap and attach it to the corner, then attach the side straps directly opposite to each other on both sides of the corner. Repeat for each corner. The fitted sheet holders are fully adjustable - tight....
Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

  • HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
  • GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
  • SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
  • EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
  • SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....
Check Stock

TEKTON Locking Pliers Set, 6-Piece (Straight Jaw, Curved Jaw, Long Nose) | PLK99903

  • Includes 2-pc. straight jaw locking pliers: 5, 10 in..
  • 2-pc. curved jaw locking pliers: 5, 10 in..
  • 2-pc. long nose locking pliers: 6, 9 in..
  • Straight jaw pliers clamp flat stock, L-angle, and sheet metal for welding or assembly.
  • Curved jaw pliers with straight tips grip round, square, and hex shapes, flat stock, and sheet materials.
  • Long nose pliers reach into narrow spaces to hold thin flat stock and sheet metal in position.
  • Pull-type release lever works like a trigger for controlled one-handed operation and fast repositioning.
  • Generously sized tension adjustment knob offers a large, nonslip knurled surface and a through hole for added leverage with a second tool.
Check Stock