Categories

Best Sheet Metal Forming Pliers

BILITOOLS 3-Piece Hand Seamers Sheet Metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool

  • Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide..
  • Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas..
  • Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles..
  • The pliers jaw close perfectly parallel and the edges of the pliers head are very straight—but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers..
  • Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while..
Check Stock

Baymyer 3PCS Jewelry Pliers, Pliers for Jewelry Making, Tools for Jewelry Making kit, Jewelry Making Supplies, Mini Pliers, Wire Cutter for Jewelry Repair Set

  • ... Also known as chain-nose pliers, it is a multi-functional pliers. The jaws are long and thin, without teeth and sharp. They can enter narrow places that other types of pliers cannot enter. Needle-nose pliers are very suitable for clamping, bending, crimping, opening and closing jump rings, fixing small objects and forming wires..
  • 【Round-Nose Pliers】: Round-nose pliers are a special kind of pliers, and its jaws are tapered. They are often used to make metal wires form a loop, which can be used to wind any metal wire and make your own eye needles..
  • 【Jewelry Wire Cutters】: Jewelry wire cutters are very suitable for cutting thin metal wires or flexible thin wires. The flat blade means you can cut directly to the edge of the job, and cut at angles that are difficult to reach, minimizing the amount of trimming and trimming required..
Check Stock

4 Pack Jewelry Pliers Jewelry Making Pliers Tools Kit with Needle Nose Pliers/ Chain Nose Pliers, Round Nose Pliers, Bent Nose Pliers, Wire Cutters for Wire Wrapping Earring Craft Making Supplies

  • ... tight places that are inaccessible to other types of pliers. The needle nose pliers are perfect for gripping, bending, crimping, opening and closing jump rings, holding small items and shaping wire..
  • ✅【ROUND NOSE PLIERS】The round jewelry pliers features by their round, tapering jaws and most commonly used for forming loops in wire, this is especially handy when doing any wire wrapping and also for creating your own eye pins..
  • ✅【JEWELRY WIRE CUTTERS】The jewelry cutter pliers are ideal for cutting thin metal wire or flexible jewelry string wire. The flat blades mean you can cut right up to the edge of your work and in hard to reach places minimizing filing and finishing needed..
Check Stock

HURRICANE 18 Inch Folding Tool, Sheet Metal Bending Tool for HVAC, Bending and Forming Metal

  • 【Sheet Metal Folding Tool】Hurricane 18" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
  • 【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
  • 【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
  • 【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
  • 【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..
Check Stock

Jewelry Pliers Set, Paxcoo 3Pcs Jewelry Making Pliers Tools Kit includes Needle Nose Pliers, Round Nose Pliers, Wire Cutters for Jewelry Making Supplies, Wire Wrapping, DIY Crafts, Beading

  • ... and pointed. The needle nose pliers are perfect for gripping, bending, crimping, opening and closing jump rings, holding small items and shaping wire.
  • ROUND NOSE PLIERS for JEWELRY MAKING – The round jewelry pliers are specialized pliers characterized by their rounded, tapering jaws and are most commonly used for forming loops in wire, the conical jaws can form rings of different sizes, this is especially handy when doing any wire wrapping and also for creating your own eye pins.
  • WIRE CUTTERS for JEWELRY MAKING - The jewelry wire cutters are ideal for cutting thin metal wire (up to 1mm) or flexible jewelry string wire. The flat blades mean you can cut right up to the edge of your work and in hard-to-reach places, minimizing filing and finishing needed.
Check Stock

5 Inch Flat Nose Pliers Smooth Jaw Pliers for Jewelry Making Wire Bending Straightening Ring Opening Cutting (Black)

  • 【Comfortable Handle】: Our flat nose pliers for jewelry making have comfortable, anti-slip PVC coated insulated handles that protect your hands against arc flashes or accidental electrocution..
  • 【Wide Application】: Work greatly in jewelry making, electronic repair work, as well as other DIY projects. Can bend metal sheet and wire into desired shape. In repair work, for pulling pin, spring, etc., for metal parts assembly and telecommunications engineering commonly used tools..
  • 【Premium Material】: Made of carbon steel, making the pliers are durable and long lasting use. Mini flat nose pliers for jewelry making and hobby use..
  • 【Mini Size】: This flat nose pliers for wire wrapping bending are enough small and lightweight to carry whenever and wherever. The tip of this flat pliers is 1/4 inch wide..
  • 【Smooth Jaw】: The jaw of this plier is flat and wide, it is a smooth jaw flat nose pliers. They don't leave marks on the metal..
Check Stock

DURATECH 8-Piece Pliers Set, Premium Cr-V/Cr-Ni Construction, (12\

  • 【Mechanic Pliers Tool Set】DURATECH 8-Piece Pliers Set for mechanics is great for gripping small parts, bending, shaping, twisting wire, crimping sheet metal, working with fasteners, and more. All pliers with the hardened cutting edge for cutting effortlessly..
  • 【High-Strength Materials】Professional forged Cr-V Steel & Cr-Ni Steel & high quaility steel, heat-treated, provides high strength and durability. Chrome plated for rust resistance, with high hardness and wear resistance..
  • 【3PCS Groove Joint Pliers】The pliers set contains 3 different sizes of Groove Joint Pliers: 12.
Check Stock

Hurricane Sheet Metal Tool, Sheet Metal Folding Tool, Sheet Metal Bending Tool for HVAC, 12 Inch Folding Tool for Bending and Forming Metal

  • 【Sheet Metal Folding Tool】Hurricane 12" sheet metal folding tools offer a premium choice for bending and forming metal, folding seams are formed from 2 steel halves, permanently joined together..
  • 【Two Folding Depths】Creates 3/8" and 1" depth folding in ductwork..
  • 【Ideal for HVAC Applications】Used for bending and forming metal, making seams, hems, pans and drive edges..
  • 【Ensures Precise and Accurate Bends】Handy sight holes assure accurate bending depth alignment..
  • 【Constructed of Heavy 16-Gauge Steel】Powder-coated low carbon steel to resist rust..
Check Stock

Metal Earth 3-Piece Tool Set - Clipper - Flat Nose Pliers - Needle Nose Pliers

  • Metal Earth 3-Piece Tool Set facilitates the building of 3D museum quality models from steel sheets..
  • Clipper - Great for cutting pieces from the metal sheet. Eliminates the need to remove each piece by bending back and forth..
  • Flat Nose Pliers - Used to hold parts securely and to create tight connections by pulling and twisting tabs..
  • Needle Nose Pliers - Also used to hold parts plus bend and twist tabs but can reach places in which the flat nose pliers do not fit..
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

ImpressArt - Ring Making Kit for Jewelry Making Bending and Wrapping Metal Tool Includes 8 Metal Ring Blanks

  • Ring Bending Pliers easily bend, form, and reshape ring stamping blanks and metal strips. Also can be used to make curves in other soft, low-gauge....
  • Constructed of stainless steel and built to last. Nylon jaws on the Bracelet Bending Pliers are softer than all metals, and will not damage bracelet....
  • Nylon jaws included and can be replaced (replacement sets sold separately)..
  • Dual rubber grip provides a firm hold when forming metals into shape.
  • Includes 8 ring blanks: (4) 8-10 Size and (4) 7-9 Size..
Check Stock

8MILELAKE Panel Flange Hole Punch and Crimping Tool 5 mm Hand Flange Punch Tool

  • Original Combined Settling Hole Pliers for depositing sheet edges and punching workpieces..
  • Handhabung without effort - one-handed operation - hardened settling jaws. Maximum power transmission with low effort..
  • Applied for the repair of the car body and most other sheet metal work..
  • Material / Pliers Body: Made of special tool steel Material / Baking: Made of special tool steel and hardened.
  • Material / stamping and dies: Made of high quality tool steel and fully through hardened.
Check Stock

Fascinations Metal Earth 3D Metal Model Kit Bundle - Wright Brothers Airplane - F4U Corsair - Tool Set

  • HOBBY MODEL KIT – Unassembled model packed in an envelope with easy to follow instructions. Ideal for ages 14 and up.
  • NO GLUE OR SOLDER NEEDED – Parts can be easily clipped from the metal sheets. Tweezers are the recommended tool for bending and twisting the connection tabs.
  • WRIGHT BROTHERS PLANE – 1 Sheet Model with a moderate difficulty level. Assembled size 3.94"L x 2.01"W x 0.83"H.
  • F4U CORSAIR - 1 Sheet Model with a moderate difficulty level. Assembled size 4.53"L x 3.74"W x 1.5"H.
  • TOOL SET - Bends, holds, and twists the metal parts easier. Includes 1 x Clipper, 1 x Flat Nose Pliers, 1 x Needle Nose Pliers.
Check Stock