Categories

Best Sheet Metal Shrinker Jaws

BILITOOLS 3-Piece Hand Seamers Sheet Metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool

  • Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide..
  • Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas..
  • Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles..
  • The pliers jaw close perfectly parallel and the edges of the pliers head are very straight—but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers..
  • Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while..
Check Stock

CRAFTSMAN Aviation Snips, Straight Cut (CMHT73756)

  • CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel..
  • EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation.
  • DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws)..
  • 1/4-inch blade markings for quick precise cuts.
Check Stock

8MILELAKE Panel Flange Hole Punch and Crimping Tool 5 mm Hand Flange Punch Tool

  • Original Combined Settling Hole Pliers for depositing sheet edges and punching workpieces..
  • Handhabung without effort - one-handed operation - hardened settling jaws. Maximum power transmission with low effort..
  • Applied for the repair of the car body and most other sheet metal work..
  • Material / Pliers Body: Made of special tool steel Material / Baking: Made of special tool steel and hardened.
  • Material / stamping and dies: Made of high quality tool steel and fully through hardened.
Check Stock

XCMAN All Metal Alpine Ski Vise for Ski Tuning and Waxing Adjustable Angle and Height Durable and Stable

  • 3 Pieces alpine ski jaws vise set and included 2 brake retainers in a color box..
  • Center clamp jaw opens to accept skis up to 3.94 inch(100mm) wide.The range is (1.38inch-3.94inch)35-100mm. Two end supports that adjust in height....
  • Center clamp has rubber pads on top of the jaws so that you can safely rest your bases on while adjusting bindings or doing top sheet work.These end....
  • Ends supports can pivot up to 30 Degrees (from straight position) for multiple angle settings for those who prefer different viewing angles when side....
  • Durable and Stable. All metal and rubber construction..
Check Stock

Knife Making Tongs Set and Blacksmiths’ Hammer Assembled Bladesmith Blacksmith Forge Tongs Tools Set Vise Tools with 1500G / 3.3LB Blacksmiths’ Hammer – 4Pcs

  • ... projects and can be shaped into box jaws, wolf jaws or v-bit tongs to accommodate various sizes of metal..
  • Blacksmiths’ Hammer--1500g (3.3 pound) weight blacksmith’s hammer has a good feel and balance that offering a solid feel of control. The hammer could be used for sheet-metal, mild wrought iron and forging works. Also fit for others who need pounding things..
  • High Quality Material--Forged from quality steel round stock with non-slip wax surface, rust and corrosion resistance, providing the user with a comfortable grip. All tongs measure about 15 1/2 to 16 inches, making them easy to operate and keeping your hands a safe distance from the forge when removing steel..
Check Stock

FASTPRO 4-piece Locking Pliers Set, 5\

  • Locks on with adjustable force for a custom grip that won't slip One-handed squeeze action and trigger release for quick re-positioning.
  • Classic all-steel construction with forged and hardened jaws.
  • Adjustment screw provides the ideal holding pressure.
  • Built-in wire cutter. Forged steel is strong and durable.
  • Ideal for tightening, clamping, twisting and turning flat objects such as sheet metal.
Check Stock

XCMAN Ski Snowboard Vise for Tuning and Waxing Durable and Stable - Aluminium Material

  • Snowboard alpine ski jaws vise set and included 2 brake retainers..
  • Alpine Ski and Snowboard VISE Plus-Ultra wide space 28cm(11.02 in)..
  • Vises clamp to workbenches or tables up to 2.36inch(60mm) thick..
  • Has Non-slip rubber pads on top of the vise and so that you can safely rest your bases on while adjusting bindings or doing top sheet work.These end....
  • Durable and Stable. All metal and rubber construction.High quality all metal and rubber construction material to keep durable and stable..
Check Stock

Malco M2006 10-3/4 in. Left Offset Snips

  • Nothing out cuts, outmaneuvers or outlasts MAX2000 Aviation Snips.
  • Cuts sharp left angles, straight lines and 5" (125 mm) diameter circles.
  • Alloy steel blades with serrated lower jaws for solid gripping power in sheet metals.
  • Offset handles for easy access when cutting in tight spaces.
  • All-new, ambidextrous, one-hand-operation metal latch is accessible from the top or side.
  • A narrower grip opening accommodates large or small hands.
Check Stock

MacWork Locking Sheet Metal Clamps 10in.(250mm) Welding Locking Plier Tools Adjustable Opening

  • Classic trigger release designed to provide maximum locking force.
  • Made of high-grade alloy steel for maximum toughness and durability.
  • Ideal for bending, forming and crimping sheet metal.
  • Quick release lever designed to provide maximum locking force.
  • Turn screw adjustment to adjust pressure and fit work. Wide opening jaws provide greater versatility.
Check Stock

Felled Timber Claw Hook, 28in - Log Lifting Tongs Heavy Duty Grapple Timber Claw, Lumber Skidding Tongs Logging Grabber

  • ...ant high-grade synthetic metal ensuring a strong traction.
  • Self-adjusting Gripper Clamp - Golablatt panel lifter features the firmly durable, impact-resistant fiberglass with rubberized TPU gripping pads mounted on both clamping plates increased friction of contact to prevent slipping and protect the surfaces of the sheet from being damaged.Suitable panel thicknesses up to 3/4 inch thick.
  • Safe & Energy-efficient - The weight is distributed evenly when the carrying clamp handle is placed centrally on the panel. The clamp grips tight as you lift. It allows you to lift and move sheet with a straight back, eliminating the requirement of bending over to get under the bottom. Less weight pressure with this tool and greatly reduced risk of injury to the back, neck, shoulders and arms.
  • Goldblatt Soft-Grip Handles - Ergonomic soft-grip handle that makes carrying sheets effort lessly and it easy for a single person to carry full sheets of material with only one hand. It can hold up to 2 panels at once, single accommodating loads of up to 100 pounds.
  • Professional Grade - Use the Goldblatt gripper to grip and carry MDO or MDF panels, drywall, plywood, tabletops, sheep metal, OSB, melamine and other sheet goods.
Check Stock

ENGINEER NS-06 Precision Mini Side Cutter, Micro Nippers, Professional Grade, ESD Safe with Hardened Carbon Steel Undercut Jaws ideal for work on PCB

  • CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel..
  • EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation.
  • DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws)..
  • 1/4-inch blade markings for quick precise cuts.
Check Stock

OTC 4579 9-Way Slide Hammer Puller Set , Black

  • OTC's 9-Way Slide Hammer Puller Set is ideal for pulling flange-type rear axles and most front-wheel drive hubs.
  • Internal and external jaws provide a variety of combinations to pull bearings, gears, and seals.
  • Two- and three-way cross blocks and cone provide the perfect jaw configuration for most jobs.
  • Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements.
  • Designed for use with other OTC 5/8 inch-18 thread slide hammer attachments.
  • Enjoy special OTC Tools promotions, offers, and exclusive product rebates on auto tools – see more details in the offer flyer in the photos section of this listing.
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock