Best Sheet Steel Welding Clamp

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Butt Welding Clamps includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.

Check Stock

VCT 24 pc Butt Welding Clamps Weld Sheet Metal Auto Car Door Skin Panel Fender New

Suitable for metal straight panel or curved panel complex industry. These small fixtures hold panels of any shape anywhere-edge-to-edge, and are fully fixed before butt welding, leaving only a small gap that allows the weld to fully penetrate. Once the two parts are tack welded together, the wing nut is loosened, and the elbow lever is removed and the clamp is removed from work before final welding..
To align and clamp sheet metal panels for precise spot welding,butt welding,edge-to-edge welding and tacking in place.
For precise spot welding, positioning, butt welding and edge-to-edge welding, fully align and clamp the metal plates..

Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials..
【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to make sure a firm fixation.
Use all 16 clamps for larger projects, then perform joint welding between them..
【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..

Check Stock

VIVOHOME MIG Welder 130 Flux Core Wire Automatic Feed Welding Machine Portable No Gas 110V DIY Home Welder w/Free Mask Black

NO REACTION WELDER – With convenient flux-cored wire to self-release metal inert gas while welding, this welding machine prevents oxidation of the welded part.
A great choice for home repairs and hobby projects on light gauge steel.
WELDING PROCESS – This welding machine is particularly well-suited for projects of mild steel and stainless steel.
It delivers a professional finish for any thin steel welding or auto body work you may need, being powerful and efficient.
ADJUSTABLE WELDING SPEED – The VIVOHOME MIG Welder features 4x current flow settings.
Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of thin steel, stainless or aluminum sheet metal, or even thicker steel.
PORTABLE DESIGN – Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want.
It only weighs 34.6 lbs., so you can effortlessly take it as far as you can.
ACCESSORIES INCLUDED – The VIVOHOME MIG Welder package includes all the accessories you need to weld like a pro: 1x 6.6′ welding gun with on/off safety control.

Check Stock

VIVOHOME MIG Welder 130 Flux Core Wire Automatic Feed Welding Machine Portable No Gas 110V 120V AC DIY Home Welder w/Free Mask Yellow

NO REACTION WELDER - With convenient flux-cored wire to self-release metal inert gas while welding, this welding machine prevents oxidation of the welded part.
A great choice for home repairs and hobby projects on light gauge steel.
WELDING PROCESS - This welding machine is particularly well-suited for projects of mild steel and stainless steel.
It delivers a professional finish for any thin steel welding or auto body work you may need, being powerful and efficient.
ADJUSTABLE WELDING SPEED – The VIVOHOME MIG Welder features 4x current flow settings.
Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of thin steel, stainless or aluminum sheet metal, or even thicker steel.
PORTABLE DESIGN - Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want.
It only weighs 34.6 lbs., so you can effortlessly take it as far as you can.
ACCESSORIES INCLUDED – The VIVOHOME MIG Welder package includes all the accessories you need to weld like a pro: 1x 6.6' welding gun with on/off safety control.

Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

...es an advanced IGBT inverter design. It has the following advantages: stable wire speed, high no-load voltage, with good compensation of arc force, easy arc starting, less spatter, stable current, and no electromagnetic noise. This machine has both voltage adjustment and current adjustment, which can provide better welding performance to the workpiece..
【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contac....

Check Stock

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
The handle of stamped steel plate, clamping object without deforming.
The heat treatment adjusting rod is easy to adjust the suitable size.
Additionally, the serrated jaw of locking C clamp has a strong clamping force.
Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
The quick release handle is convenient and labor saving.
Moreover, the spring provides good tensile force.
Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
Since the jaw can generate large clamping force, the clamped objects will not loosen.
Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
And woodworkers can use this metal tool to quickly clamp boards or frames.

Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.

Check Stock

Spot Welder with LCD Screen, 70 Gears Adjustable DIY Battery Spot Welding Equipment Portable Mini Spot Welder for Battery, Built-in 7500 mAh Rechargeable Battery, Type-C Port, Nickel Strip & USB Cable

【Upgraded LCD Screen】MIXILIN spot welder is made of high-quality aluminum alloy material with an anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system internal temperature, charging status, remaining battery, gear level and time interval of the spot battery welder..
【70 Gears Adjustable】Mini spot welder with 70 gears adjustable output power design, it can satisfy more professional welding demands. 1.0-2.9 gears suitable for thin nickel sheet.
3.0-6.5 gears suitable for medium thickness nickel sheet.
6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
【Built-in 7500 Ma-h Rechargeable Battery】Portable spot welder built in 7500mA-h high-rate rechargeble battery,with type-C charging cable,can be fully charged within 3 hours, and it can continuously weld about 2000 points after being fully charged. It also can be used as a power bank when you need charging during traveling or outgoing, support 2.4A fast charging..
【40cm Welding Pen & Safe to Use】The gold-plate spot-welding pen consists of multiple strands of high temperature wire, with fine con....

Check Stock

10PCS Toggle Clamps 201 Quick Release Hand Tool Antislip Red Horizontal Clamp 60Lbs Holding Capacity

【THE GOODS IN THE PACKAGE】:10Pcs Toggle Clamps 201.
【TOGGLE CLAMP SIZE】：7.8 x 2.8 x 1.8cm/ 3" x 1.1" x 0.7"(L*W*H).
Hole Dia : 0.6 x 0.4cm/ 0.23" x 0.15"(L*W).
【MATERIAL】: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips..
【WIDE USAGE】Rugged fixtures are best for quickly holding down sheet metal or circuit boards,for machine operation,woodworking,welding,mould,electronic equipment assembly,etc field.Widely used on during welding processing, riveting processing and other processing of fixture products..

Check Stock

Amazon Basics Locking Pliers - Welding Clamp 9-inch

9-inch locking pliers and welding clamp tool for welding applications and securing holding awkwardly shaped items.
Includes (1) 9-inch locking pliers and welding clamp tool made of alloy steel with a rust-resistant nickel-plated finish.
U-shaped jaws offer better visibility and more space to work.
Screw-adjustable locking mechanism ensures ultimate locking force.
Classic trigger release quickly and effortlessly unlocks the tool.

Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....

Check Stock

4Pcs 4\ 55 lbs Arrow Welding Magnets Metal Working Mig Tools and Equipment Magnetic Welding Clamps Workshop Welder Soldering, Can be used for household, industrial welding, iron metal bracket fixing

STRONG POWER: The suction power is strong, the material is solid, it is 2.5 times the suction power of the ordinary fixator, and the suction power reaches 55LBS.
Safety & Safety: These welding fixtures clamp the metal to keep it at the angle you need to work safely and effectively. The welding fixture adopts strong and durable galvanized sheet, which is sturdy, corrosion-resistant and has stronger magnetic force..
THREE ANGLES: Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
MULTIPURPOSE: They connect parts, freeing up your hands for efficanciacy work and improve work safety, and it can also be used as a floater to separate steel plates.
Regarding service: SHANGHUI Magnet provides unconditional return and exchange of goods in question. If you need help, please contact us by email, and we will provide solutions within 24 hours..

Check Stock