Best Shield Anchor

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Ebros Gift Large Saint Patrick Celtic Warrior Faith Cross With Circle Ring Warriors Shield Wall Plaque Hanging Sculpture 18\Tall Decor Figurine Statue

  • This Celtic Cross wall sculpture is made of polyresin, handpainted and polished individually. Is a replica of the legendary high cross shield of faith that Celtic warriors carried into battle!.
  • This cross shield cress wall sculpture is designed in shamrock green color to commemorate Saint Patrick's Faith and Commitment to the Christian Faith of Jesus. In the new testament of the Bible, faith takes the form of a shield in a believer's life. Display this crest on your wall to remind you of the importance of the shield of faith..
  • This Celtic Cross wall sculpture measures approximately 17" tall, 13.25" wide and 1.75" deep. It is highly recommended to anchor your screws before mounting. The wall sculpture weighs about 3 pounds..
Check Stock

Swampfox Ironsides Shield - Black Stainless Steel dot Sight Protector for Liberty, Justice & Sentinel - Liberty

  • All impact forces hit the black stainless steel Ironsides Shield instead of the optic. One handed barricade racking, covered. Dropping in a 3Gun match, covered. Abuse of daily carry and other impacts are all routed around your optic and straight to the mounting footprint area.
  • Our dot sights have a great guarantee. That doesn’t mean you can’t break them. By putting an Ironsides Shield over the optic, you insure it is ready when you need it.
  • Includes one set of (longer)screws: #6-32 x .393"/ T10. These provide a deeper anchor base for greater shock protection.
  • The Ironsides Shield is made from blackened 304 stainless steel. This reduces visibility and glare as well as being as close to rust proof as steel gets.
  • Insurance for those who know their optic.
Check Stock

5/16\-18 Double Expansion Shields (Pack of 12)

  • Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts.
  • Four Part design: a two-piece tubular shield, a hollow, wedge-shaped cone and a wedge-shaped nut-- brought together into a single anchor unit.
  • Used in soft masonry with machine screws or machine bolts.
  • Can also be used in harder materials, including stone, brick, concrete or block.
Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Barsony Concealment IWB Holster for Shield Laser Max Centerfire Right

  • Barsony Concealment IWB Holster for S&W M&P Shield with Laser. This holster fits Laser Max Centerfire and Crimson Trace LG-489 lasers for S&W M&P Shield. Ultra thin four-layer laminate that is no thicker than conventional suede leather holsters. Internal moisture barrier won't transmit perspiration to gun..
  • LIGHTWEIGHT, OPEN STYLE, ULTIMATE CONCEALMENT. HIGHEST QUALITY CORDURA NYLON WITH PRECISION STITCHING. STRONGEST STEEL BELT CLIP IN THE INDUSTRY..
  • Barsony Concealment IWB Holster is compatible with gun make/model sizes listed in the drop down menu. Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw..
  • PREMIUM LEATHER BACKING FOR BELT CLIP CARRY. WEAR IT STRONGSIDE, CROSSDRAW, OR SMALL OF BACK..
  • The picture shows a right hand draw- strongside (right side) holster. If you are right handed and wish to carry on the small of the back request a left hand holster. If you are left handed for left side carry request left hand holster. If you are left handed and wish to carry on the small of your back select right hand draw..
Check Stock

Bandai Hobby PG 00 Gundam Seven Sword/G Gundam 00' 1/60, White, Model Number: -

  • GN Katars can be mounted on knees and also held in hands..
  • The GN Buster Sword II can convert between shield and sword forms and features LED gimmicks..
  • Both GN Sword II weapons can convert between sword and rifle modes, and a wire is included to replicate the rocket anchor ability of the Short sword..
Check Stock

IWB Holster Fits:Ruger EC9S / LC9S / LC380 / SR22 - Inside Waistband Concealed Carry Pistols Holster (Right Side)

  • Barsony Concealment IWB Holster for S&W M&P Shield with Laser. This holster fits Laser Max Centerfire and Crimson Trace LG-489 lasers for S&W M&P Shield. Ultra thin four-layer laminate that is no thicker than conventional suede leather holsters. Internal moisture barrier won't transmit perspiration to gun..
  • LIGHTWEIGHT, OPEN STYLE, ULTIMATE CONCEALMENT. HIGHEST QUALITY CORDURA NYLON WITH PRECISION STITCHING. STRONGEST STEEL BELT CLIP IN THE INDUSTRY..
  • Barsony Concealment IWB Holster is compatible with gun make/model sizes listed in the drop down menu. Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw..
  • PREMIUM LEATHER BACKING FOR BELT CLIP CARRY. WEAR IT STRONGSIDE, CROSSDRAW, OR SMALL OF BACK..
  • The picture shows a right hand draw- strongside (right side) holster. If you are right handed and wish to carry on the small of the back request a left hand holster. If you are left handed for left side carry request left hand holster. If you are left handed and wish to carry on the small of your back select right hand draw..
Check Stock

MroMax Expansion Lifting Eyebolt M10x60mm Eye Ring Bolt 3.54\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M6x80mm, please refer to the picture for detailed dimensions..
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable..
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe..
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air -conditioning fixed, home decoration, engineering, etc..
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall.. As long as the threaded part is long enough, the sleeve part will be deeper and stronger..
Check Stock

MroMax Expansion Lifting Eyebolt M12x80mm Eye Ring Bolt 4.72\ Length 304 Stainless Steel Expansion Bolts with Nuts Eye Hooks Anchor Fastener for Concrete Wall Masonry Ceiling Silver 2Pcs

  • 10 standard M8x80mm, please refer to the picture for detailed dimensions.003cbr003e.
  • 304 stainless steel, corrosion-resistant, can also be used in humid places, strong and durable.003cbr003e.
  • The expansion screw is a solid structure, and the punch is formed at one time, with a large bearing capacity and extremely strong tensile strength.
  • the expansion pipe is cut by seamless steel pipe, which has a large tensile force after expansion, which is strong and safe. 003cbr003e.
  • Application: This heavy-duty torque control shield anchor Hardware Tools for Wall Building is suitable for concrete masonry and solid brickwork,ceiling,expansion sleeve anchor bolt heavy duty fixing anchors suitable for fences, anti-theft, doors and windows, rain sheds, air-conditioning fixed, home decoration, engineering, etc.003cbr003e.
  • Note: Expansion bolts must be installed on a relatively hard base plate, and the soft and easy to fall off places are unstable, such as the gap of the lime soil of the wall. All expansion pipes should enter the wall. . As long as the threaded part is long enough, the sleeve part will be deeper and stronger.003cbr003e.
Check Stock

Mxeol Claw Anchor 4.4 lb Pontoon Boat Anchors Galvanized with Stainless Steel Chain Shackles 1/4 inch (Silver, 4.4lb)

  • Boat anchor 4.4 pound is made of galvanized carbon steel with 2 meters stainless steel anchor chain 1/4 inch and ss shackles 1/4 inch..
  • Boat anchors kit claw anchor 4.4 lb with 2 sizes options: 4.4lb (2kg), 8lb (3.5kg)..
  • Sea anchor for boat is with ideal sizes. 4.4lb anchor fits 12 to 16 feet boats, 8lb anchor fits 17 to 24 feet boats..
  • Marine anchor fits most bottom types as boat sand anchor or shallow water anchor, etc., holds in a variety of seabed, The claw anchor sets quickly, stows easily on the bow roller..
  • Pontoon boat anchor is all purpose anchor which remains stable even when tide and wind conditions change..
Check Stock

VEVOR Anchor Chain, 10' x 5/16" Galvanized Steel Chain, 3/8" Anchor Chain Shackle, 11650lbs Anchor Lead Chain Breaking Load, 9460lbs Anchor Chain Shackle Breaking Load, Anchor Chain for Boats, Ship

  • 【DURABLE GALVANIZED STEEL】- Our marine 10 feet boat anchor chain is made of galvanized steel 5/16" with two 3/8" bow buckles. Chain break load: 11,650 lbs. Shackles break load: 9,460 lbs. Increased durability of our chain will help properly set your anchor for years to come with superior construction..
  • 【6" EXTENDED ANCHOR CHAIN】- The heavy boat anchor chain has an additional 15 cm/6 inch based on 10 feet, which is convenient for you to use. If you are looking for a more reliable anchor chain, this is your solution..
  • 【TWO QUALITY BOW SHACKLES】- Large 3/8" galvanized steel bow shackles are designed to work with almost all anchor lines. Our thread bow shackles to avoid loosening and falling from the anchor chain..
  • 【RELIABLE ANCHOR CHAIN】- The use of an anchor lead chain enhances the anchor's holding power by keeping the shank parallel to the lake bed or seafloor, helping to eliminate unwanted pull-out or anchor freeing caused by wave motion or boat drifting..
  • 【WORK WITH DIFFERENT ANCHORS】- Our anchor chain can be used with almost all boat a....
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock