Categories

Best Shimano Cable Cutter

Hit Tools 22-ICC27 1-1/16-Inch Impact Wire Rope/Cable Cutter - Sold by Ucostore Only

  • ♛ Powerful Tool ------ Excellent tool for cutting stainless steel wire rope. This cable cutter is designed for cutting steel wire which up to 5/32”, If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut..
  • ♛ High Quality ------ Steel Cable Cutter Cuts up to 5/32"" stainless steel cable. It features hardened steel blades, thumb catch designed for one-handed operation, and contoured cushion rubber handle non-slip grips..
  • ♛ Easy Cutting the Cable ------ This cable cutter can make very precise, very clean cuts without fraying or smashing the ends. it not only cut the cutaway cables and ripcords perfectly also great for grommet removal. This cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
  • ♛ MULTI USAGE ------ Heavy duty steel wire rope cable cutter CUTS UP TO 5/32” stainless steel cable. This cable cutter is a perfect tool for cutting cable, wire rope, ripcords..
  • ♛ WHAT YOU GET ------ In this kit, You will get 1Pcs Excellent Cable Cutter tool for cutting stainless steel wire rope. Precise without frayi....
Check Stock

Cyclon Shimano MT200 MTB Hydraulic Disc Brakes Set, Left Front 800mm Right Rear 1400mm with Rear PM/is Adapter Aluminum Alloy Hydraulic Bike Brakes, Dual Disc Piston Fit 160mm Rotors Hydrauli Brakes

  • 【Brake Size】: For Cyclon shimano brakes,left side controls the front, right side controls the back, cable of front is 800mm, cable of back is 1400mm, with rear PM/IS adapter..
  • 【Massive Stopping Power】: Shimano hydraulic brakes is the best upgrade kit from mechanical brake, dual-piston oil pressure hydraulic brake caliper helping you braking easier, you can stop with almost no pressure..
  • 【Quiet Braking】: The brake pad of this shimano mt200 hydraulic brakes is made of resin-metal composite pads, not only not damage your rotor, but also not make any noise when braking..
  • 【High Compatibility】: Shimano disc brakes set suitable for most mountain bikes, electric ebike,fat bike,folding bike,scooter (You only need to consider whether the tubing is long enough, package not inclued adapter..
  • 【Easy to Install】: shimano hydraulic brake set uses mineral oil fluid(pre bled), unboxing ready to install and use. And unlike other low-end hydraulic brakes, you can easily buy professional maintenance tools and pad..
Check Stock

MIHAO Steel Cable Cutter - Wire Rope Cutter - Bicycle Cable Cutter for Cable Railing,Up to 5/32 inch Copper Cable Cutter with 10Pcs Bike Brake Cable Cap End Tips, Red&Black, 7.7 x 2.2 x 1.2 inches

  • 【EXCELLENT DESIGN】Mihao cutter heavy duty is designed for cutting steel wire, It can cut less than 5/32" hard steel cable, wire rope, spring wire, aluminum cable etc. Mihao Wire Cutter is very sharp and clean cut.
  • 【HIGH QUALITY MATERIAL】 Mihao Wire Cutter is made of Chrome-Vanadium Steel, durable, cut quick. Knife edge had a heat treatment, so which made the blade hard enough to cutter.
  • 【SIMPLICITY OF OPERATOR AND WORKS WELL】 Mihao cable wire cutter use to operate easily with one hand, Because Mihao wire cutters has a Labor-saving spring. Practical and durable-make very precise, very clean cuts without fraying or smashing the ends, it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
  • 【APPLICATION】 Recommended for installing less than 5/32”cable railing projects, bicycle Cable, stainless steel wire rope, aircraft cable, copper cable, aluminum cable etc.
  • 【PACKAGE DETAIL】 Cable Cutters includes a 8 inch stainless steel wire cutter for cutting steel wire which up to 5/32”, with 10pcs bike brake cable end caps, ST:Stainless Steel Wire Rope Cutter Bicycle Cable Cutter for Cable Railing Deck Copper Steel Cable Cutter.
Check Stock

BUCKLOS Shimano MT200 MTB Hydraulic Disc Brake Set, Left Front 800mm Right Rear 1500mm Mountain Bike Hydraulic Disc Brake with Universal is/PM Caliper for MTB XC Trail, e-Bike, Fat Bike

  • 【Brake direction】For this Shimano hydraulic brakes, the left front brake cable is 800mm, right back brake cable is 1500mm. ideal for mountain bike/e-bike/folding bike/fat bike/electric scooter.
  • 【Easy braking】This shimano hydraulic brake set is dual-piston oil pressure(Mineral oil has been pre-bled), no matter how fast the speed, how steep the terrain, how wet the environment, gently pull the brake lever to stop immediately..
  • 【Quick Installation】shimano mt200 hydraulic brakes compatible with 160mm rotor(package without iS/PM adapters) please measure your brake tube routing length first for right choice..
  • 【Quiet brake】 shimano hydraulic brakes have high-strength aluminum alloy brake lever which is not easy to damage and is more wear-resistant. The resin pads of shimano disc brake set has better heat dissipation and quiet ..
  • 【Three-finger brake lever】 Three-finger brake levers is designed according to the human body. Left front /right rear Compatible with most people's usage habits.
Check Stock

Jagwire Road Shop KIT - Complete Brake & Shifter Cable and Housing Kit- Black - SRAM/Shimano

  • (1) - 2.0 m x 5.0 mm JAGWIRE CGX-SL, Low compression, CGX reinforced, Jet Lubed Housing, BLACK color.
  • (2) - 1.7 m x 1.5 mm JAGWIRE ROAD Slick Galvanized Brake Cable - SRAM/Shimano Compatible.
  • (1) - 2.0 m x 4.0 mm JAGWIRE LEX-SL, LEX reinforced, Jet Lubed housing, BLACK color - Jagwire Logo.
  • (2) - 2.3 m x 1.2 mm JAGWIRE ROAD Slick Galvanized Shifter Cable - SRAM/Shimano Compatible.
  • All required end caps & cable tips / No Retail Packaging.
Check Stock

Knipex 74 21 250 High Leverage Diagonal Cutters 9,84\ 12° angled

  • Material--The Cable Cutter is manufactured from 55# steel and is hardened for durability and strength..
  • Special Design--Cable Cutters Heavy Duty with optimal geometry blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable.
  • Convenient--Cable wire cutter is easy cutting with one hand operation.
  • Comfortable Handle--Compact cable cutter comfort grip handles for extra comfort and grip during use..
  • Application--Cable cutter stripper provides outstanding cutting performance on solid copper wire, twisted pair and coax cables..
Check Stock

Poodle Clipping and Grooming: The International Reference

  • High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, dril....
Check Stock

OneUp Components Remote Dropper Lever V3, Black, (Clamp not Included) (Replacement Cushion (Blue))

  • ...s cut marks that take the guess work out of cutting your cable and lets you tuck the cable away for you a super clean look. Compatible with all cable actuated dropper posts..
  • COMPATIBILITY - Clamps Sold Seperate: For 22.2mm bars, For 31.8mm bars, For Sram Matchmaker X, For Shimano I-spec-EV, For Shimano I-spec II. Levers not compatible with 2x/3x Front shifters or V1 Oneup Clamps.
Check Stock

ZAOTOTO Cable Cutter Heavy Duty Wire Rope Cutter for DIY Projects Railing Decking Wire Seals & Bicycle Cable | Sharp & Precise One-Hand Operation Steel Cable Cutter

  • This cable cutter is designed for cutting steel wire which up to 5/32', If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut.
  • wire Cutter is an excellent Cutter for both soft and hard steel cable or wire rope:Labor-Saving Spring-loaded Design.
  • Durable PVC Dipped handles for added grip..
  • SAFTEY LOCK DESIGN - The thumb catch designed for one-handed operatio, which make it more safe, durable and rustproof. Labor-saving spring roll designed for easy operation. An excellent tool for cutting stainless steel wire rope..
  • NON-SLIP RUBBER HANDLE - cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
  • DIMENSION & PACKAGE- LuckIn cable cutter length 7.6 inch , width 2.2'. Package includes 1 x Cable Cutter..
Check Stock

Sanuke Cable Cutters, 6-Inch High Leverage Cable Cutter Heavy Duty---Multifunctional Compact Sharp Cutting for Aluminum, Copper, Wire, Communications Cable

  • 【High Quality Wire Cutter】6-inch cable cutter is forged with chrome vanadium steel through heat treatment, high hardness, durable and wear-resistant. The inclined surface design of the jaw can avoid the collision and damage of the two cutting edges during operation..
  • 【Sharp and Smooth Cuts】Through high-frequency quenching, polished and hardened, the jaw of cable cutter is really sharp. The shear force is strong, durable and the cutting is smooth, performing well even in confined spaces..
  • 【Multifunctional Cable Cutter】Double-blade design, one-cut for two purposes. The small blade can be used for stripping thin wires while big blade is used to cut large wires..
  • 【PVC Non-slip Handle】Non-slip PVC material and matte sense handle, is comfortable to grip. PLEASE NOTE: the handle is not insulated, do not cut live wires..
  • 【Cutting Rang】This cable cutter is suitable for cutting soft wire like copper, aluminum or communication cables. PLEASE DO NOT cut steel, iron wires, steel strands, steel core cables, and hard steel wires..
  • 【Compact Cable Cutter】6-inch cable cutter looks compact. It’s convenient to carry that you can put in your pocket easily..
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • ...ou will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, second, put one end of the oil pipe into the....
Check Stock

GROWORD Armored Fiber Optic Cable Stripping Tool SI-01,Longitudinal & Window Cable Peeler, Mid Span Cable Stripper with Adjustable Cutting Depth,2/5' to 1' Diameter (2 spare blades)

  • ➽【Adjustable blade】: With adjustable design, the depth of the cutter head can be controlled by adjusting the nut. One circle of the nut is 1mm, and one circle has 4 gears, and each gear is 0.25mm. There is a clear scale on the cutter head, you can clearly see the depth of the cutter head..
  • ➽【High-quality material】: The blade is made of high-grade aluminum alloy casting, and the cutter head is precision polished with high-quality materials, which can cut into the cable sheath easily and effortlessly.The sturdy structure and robust cutting blade can strip the harder cable sheath, which is difficult to accomplish with other tools..
  • ➽【Slip handle】: The handle is designed according to ergonomic principles, with a comfortable grip and easy operation.Will not be tiring after long time use..
  • ➽【Wide use】: This cable stripper can cut sheaths of various materials. Such as PVC, PE, steel armor sheath and non-metallic reinforced component fiber optic cable sheath, etc. Suitable for optical cables with 2 cores-288 cores and cable diameters between 2/5" and 1" (10-25mm)..
  • ➽【Easy operation】: Adjust the cutter head to a proper depth, place the cable in the slot, firmly hold the handles on both sides of the cable opener, insert the cutter hea....
Check Stock

Miller RCS-114 Hard Cable Jacket Strippers for Professional Technicians, Electricians, and Installers, Easily Portable Tool, 3.5 Ounces

  • Cable Cutter: designed to cut the armored cables and conduit wires, this cutter helps in creating airspace above the wires. It allows severing the armored casing without damaging the internal conductors.
  • Design: the armored cable cutting tool features a curved design that allows easy splicing of wires in any electrical setup, protecting the wires within.
  • Ergonomic Handle: the armored rotary cable cutter is equipped with a handle knob that can store up to six replacement blades for maximum convenience when working.
  • Ideal Applications: the clamp cable cutter works well with most armored wires up to 3/8 inch diameter. It is suitable to cut BX, MCAP, MC and Flex cables.
  • Product Specifications: the IDEAL Electrical armored cable cutter is equipped with one installed blade to enable easy splicing.
Check Stock