Shingle Removal Tool,Roof Shingle Remover Roof Shingle Nail Puller Shingle Pry Bar,Roofing repairs Removing and installing replacement shingles,Professional Roofing Tools

  • 【Handy And Premium Quality】Our Roof Shingles Removers are Made Of Premium High-strength Steel,Portable And Handy Size For Easily Using And Storage.With the rust proof and polished coating, our roofing tools will be your practical tool for shingle repairing and replacement..
  • 【Nail-slot and Claw Tip Design】The Nail-slot Head Can Help You Put the Nails Easily.Claw Tip Can Remove Nails Easily From Roof Shingles,Roof shingle remover Makes it way easier to nail underneath shingles and do repairs.During installation, with the extended offset head that holds a roofing nail perfectly and you can strike the offset head with a hammer..
  • 【Repair more efficiently】Professional Roofing Tools,it makes replacing individual or multiple Shingles a BREEZE.It saved pulling out old nails and lining up the new ones, For those who don't like being on the ROOF any longer than needed..
  • 【A Must Have for All Roofers】Shingle Removal Tool is a must have tool for roofing repairs, it makes removing and installing replacement shingles a breeze without damaging the top overlapping and outer shingles especially if your dealing with a roof that has some age on it..
  • 【Quality assurance】Any questions , any reason, you’re not happy with your purchase, please contact u....
Check Stock

Haag 4/09 Shingle Gauge

  • Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.
  • Designed with the strictest analytical tolerances possible.
  • Scales for both 3-Tab Organic and Laminated shingle varieties.
  • A great tool important for determining what a comparable replacement shingle might be.
Check Stock

Roof Shingle Remover, Heavy Duty Steel Roof Snake Tool for Roof Repair, Nail Remover, Roofing Nail Puller, Shingle Removal Tool, Roofing Tools and Equipment

  • SAVE SHINGLES AND FINGERS: The roof snake tool makes replacing shingles safer, easier and more accurate than traditional methods. It makes replacing shingle a breeze without damaging your shingles and saving your fingers and thumbs from misplaced hammer strikes..
  • NAIL SLOT: The nail slot is designed to holding a nail in place underneath the top shingle to prevent damaging the top shingle, makes replacing shingles much a much more simple task..
  • CLAW TIP: The claw tip makes puller the nail easily from roof shingles with less effort, save you a lot of time and labor..
  • BUILT TO LAST: The Roof Shingles Remover is made of premium steel for extra reinforcement and durability, it will withstand constant hammering, allowing you to use and reuse the tool for many seasons to come..
  • VERSATILE, MUST HAVE TOOL: The shingles remover is a must have tool for roofing repairs, easy to use and carry, fits easily in the tool bag. This tool can be used for many other projects as well..
Check Stock

Shingle Gauge 4/09, Roofing Tools and Equipment for Measuring Shingles Thickness, Roof Pitch Gauge and Roof Measuring Tool, Professional Tile Device for Roofer, Claim Adjuster, House Owner

  • 1【Easy to Use】4/09 shingle gauge is easy tools to measure the thickness of roof shingles, black digits writing on silver guage are very readable, it is a essential tool for roofers and insurance adjusters. Of course, it is great roofing tools for house owner to inspect roofs..
  • 2【Durable & Strong】This pitch gauge are 100% stainless steel, it is so sturdy and not easy to break or ruptured, you can freely use it in any roof works..
  • 3【Function】This Shingle gauge is a measuring tool for roof tiles, it is large enough to hold next to the shingle and take a photo showing the size of the shingle, it is simple and easy to use. On other side has a 5-inch ruler..
  • 4【Portable and Light-weighted】This high quality roof pitch measuring gauge is small size- ‎6 x 1.5 x 0.25 inches, and its weight only ‎3.52 ounces, it is extremely portable and can be taken as handy tools conveniently..
  • 5【Note】Please kindly note this shingle gauge only use for shingles manufactured January 2011 or before due to changes..
Check Stock

Qualcraft 2571 Industries General Purpose Strip Fast Shingle Remover, 27-1/2 in H, Steel, Powder Coated

  • The strip fast shingle remover is the ideal tool for removing fiberglass or asphalt roof shingles.
  • The all steel contraction of the strip fast shingle remover guarantees the toughness needed to perform the application.
  • The strip fast shingle removers feature replaceable, serrated tempered Carbon stell blades and skid plates.
Check Stock

3PLUS HCN45SP 11 Gauge 15 Degree 3/4\ to 1-3/4\ Coil Roofing Nailer

  • Drives 3/4-Inch to 1-3/4-Inch full head coil roofing nails.
  • Adjustable shingle guide for quick shingle spacing.
  • Integrated side skid pads prevent the tool from sliding off roof when placed on its side.
  • High-capacity magazine holds up to 120 coil nails at a time.
  • Tool free adjustable depth of drive for consistent and controllable nail fit.
  • Interchangeable trigger for single shot or bumper fire function..
Check Stock

4/09 Shingle Gauge, Engineering Shingle Gauge Tool, Roof Shingles Measuring Tool, Roofing Tools And Equipment, Roofing Tools, Measures And Analyze the Thickness of Shingle

  • 【4/09 Shingle Gauge】4/09 Shingle Gauge estimates the warranty level of asphalt composition shingles 3-tab Fiberglass, 3-tab Organic, and Laminated..
  • 【Function】Measures the thickness of shingle and based on analyses correlates that thickness to warranty level.Designed with the strictest analytical tolerances possible..
  • 【Professional Tools】This is a roofing tools and equipment that is designed with the strictest analytical tolerances and is to evaluate the relationship between the thickness of shingle and the warranty period..
  • 【Good Choice】 The roof shingles measuring tool has a 5-inch ruler on one side..
  • 【Pay Attention】This gauge is for use only on asphalt composition shingles installed prior to January 2011..
Check Stock

HBT HBCN45P 7/8" to 1-3/4" Coil Roofing Nailer with Magnesium Housing 11 GA Roofing Nail Gun

  • Drives 11 gauge full head coil roofing nails ranging from 7/8'' To 1-3/4''.
  • Selective actuation switch allows for either sequential or contact mode.
  • Tool-free adjustable depth control helps set nails properly.
  • adjustable shingle guide allows for quick and consistent shingle spacing.
  • Durable and lightweight magnesium housing helps reduce user fatigue.
  • Skid-resistant pads/wear guards for safety and tool protection.
  • contact safety With Carbide inserts for less wear and tear.
Check Stock

Haag Shingle Gauge, Shingle Gauge Tool, 1/12 Shingle Gauge, Haag 12/1 Shingle Gauge Tool, Haag Engineering Shingle Gauge Tool

  • ESTIMATES WARRANTY LEVEL OF 3-TAB ASPHALT COMPOSITION SHINGLES..
  • SLIDE THE 1/12 SHING GAUGE ONTON BUTT OF SHINGLE.
  • STOP AT SLIGHTEST RESISTANCE AND TAKE WARRANTY ESTIMATE..
  • DELIVERS THE MOST ACCURATE ESTIMATING TOOL POSSIBLE..
Check Stock

VOLTASK 20 Feet Aluminum Snow Roof Rake, Telescoping Snow Removal Tool with 26 Inch Blade, Extension Tubes & Anti-Skid Handle, Suitable for Removing Snow, Leaves, Debris

  • BUILT-IN WHEELS TO PROTECT YOUR ROOF - Featuring built-in rust-resistant wheels, the snow roof rake rolls properly and does not fall off or scratch your roof/shingle. Invest the durable roof rake with premium wheels to keep the edge of the rake off your roof while get the job done..
  • LIGHTWEIGHT & EXTENDABLE- Weighs only 5 lbs, the aluminum snow roof rake is easy to maneuver. The snow removal tool comes with adjustable poles that can be extended from 4.8 ft. to 19.9 ft. for snow removal and collapsed to less than 4 ft for compact storage..
  • NON-SLIP HANDLE & STRONG BLABE - Durable handle for sturdy grip and improves snow removal efficiency. The 25.9 in. aluminum rake head makes it easier to sink deeply into the snow on the roof, allowing you to remove a good amount with each pull. Works well for heavy snowfall, wet leaves and debris..
  • EASY TO STORE - The snow roof rake is an excellent option for keeping your roof snow-free during the winter season. Feel free to collapse the snow roof rake if not needed. When it's time to clean the roof, assemble the roof rake and add extension poles for better snow removal performance..
  • NO LADDER REQUIRED - No more worry about the hassle to balance a long pole while navigating ladder, or the weight pulling off the snow tha....
Check Stock

Tie Down Engineering Stripzilla Shingle Remover - Wood/Steel, Model Number 70626

  • Helps with quick shingle and nail removal.
Check Stock

Malco SB48 48 in. Fixed Head Sturdy Steel Handle Shingle Remover Other Hand Tools

  • Equipped with a 10 gauge blade that is replaceable.
  • Fixed pitch angle of the head is versatile for most shingle removal tasks.
  • Extra long teeth to get under the shingles.
  • Aggressive short teeth to pull the nails.
Check Stock

Extreme Max 5600.3262 Poly Roof Rake with 23 Blade

  • Angled blade offers more use in less space and is effective on low pitched roofs and two-story houses.
  • 6" x 23" blade provides superior snow removal.
  • Poly blade is perfect for any style slanted roof, including metal and shingle roofs.
  • Poly blade and lightweight aluminum handle make it easy to maneuver and protect against wear and tear.
  • Includes three 5' handle extension poles with easy snap-button handle assembly and disassembly.
Check Stock