Categories

Best Shocks For Inch Lifted Trucks

CURT 45460 Commercial Duty Forged Trailer Hitch Ball Mount 2-1/2-Inch Receiver 20,000 lbs 1-1/4-Inch Hole 8-Inch Drop Black

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight in the drop position (16,000 lbs. GTW, 2,160 lbs. TW in rise position).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 8-inch drop and 6-1/2-inch rise to promote level towing with large, lifted trucks.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this lifted truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

ReadyLift 77-1509 Heavy Duty Front Track Bar

  • Extra heavy duty track bar for stock or lifted vehicles.
  • Can be used on stock or lifted trucks up to 6".
  • Estimated Installation Time: 5 Hours +/- 1 hour (excluding alignment and wheel/tire assembly).
Check Stock

NEW BILSTEIN FRONT & REAR SHOCKS FOR 99-04 JEEP GRAND CHEROKEE WJ WITH A 1.5-2' LIFT, 5100 SERIES SHOCK ABSORBERS, LAREDO LIMITED OVERLAND SPECIAL EDITION SPORT 1999 2000 2001 2002 2003 2004

  • Brand New Set of Bilstein 5100 Series Monotube Shock Absorbers, 2 Fronts and 2 Rear.
  • Includes: | * 2 - Bilstein # 24-185622 Front Shocks, 46mm | * 2 - Bilstein # 33-236957 Rear Shocks, 46mm.
  • Bilstein 5100 Series Shock Absorbers are high gas pressure monotube shocks designed specifically for lifted pickups, SUVs and Jeeps | * The shocks feature a 46mm digressive piston with self-adjusting deflective disc valving | * They offer super damping ability that makes them ideal for heavy hauling or occasional off-road use, while maintaining an exceptional street ride.
  • Specs: | * Front: | * Collapsed Length: 13.58" (345.00mm) | * Extended Length: 22.09" (561.00mm) | * Rear: | * Collapsed Length: 15.12" (384.05mm) | * Extended Length: 24.35" (618.49mm).
  • Fits: | * Jeep: | * 1999-2004 Grand Cherokee WJ with 1" to 2.5" of Lift, including: | * Laredo | * Limited | * Overland | * Special Edition | * Sport | *** Bilstein's old part numbers on these shocks were F4-BE5-6255-H5 on the Fronts and 33-151649 on the Rears ***.
Check Stock

Hobbyfire Shocks Aluminum Threaded Absorber Damper Upgrades Parts Accessories for 1/10 Traxxas Slash 2WD 4×4 Rustler 4X4 VXL Stampede 4X4 Hoss 4X4 Replace 5862 (Light Blue)

  • These RC shocks are Perfect Compatible with 1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—–The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • Excellent quality—–CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which provide the car ultimate reliability and performance.
  • 4 RC Shock Absorber set—–2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws. Replacement of 5862 Big Bore Shock Set with Springs.
  • Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
Check Stock

JOYIN 4 Pack Friction Powered City Vehicles Including Garbage Truck, Fire Engine Truck, Boom Lift Truck and Construction Dump Truck with Lights and Sounds

  • Includes 1 Garbage Truck, 1 Fire Engine Truck, 1 Boom Lift and 1 Construction Dump Truck Endless Fun. A Good Variety of 4 Daily Use City Vehicles. All of Them Have Light and Sound..
  • Friction Powered. Trucks Will Roll on Their Own with Pushing for a Long Distance on Smooth Surfaces. Full of Details Like the Real Trucks. Each Truck is 10.5 Inches Long, 3.5 Inches Tall and 4.5 Inches Wide..
  • Fire Engine Has Flexible Scaling Ladder. It Can Be Rotated and Stretched Out. Boom Lift Has Aerial Work Platform, Which Can Be Elevated..
  • Garbage Truck Also Plays Like Real. Cargo Can Be Lifted. Back Door Can Be Opened to Dump In “Garbage”. Dump Bucket Is Able to Be Lifted for the Construction Dump Truck..
  • CUSTOMER SATISFACTION. Providing a 100% satisfaction experience is our main priority to our customers. Feel free to message us through “contact sellers” if products don’t meet your expectations. The celebrations start at JOYIN!.
Check Stock

Hobbyfire Shocks Aluminum Threaded Absorber Damper Upgrades Parts Accessories for 1/10 Traxxas Slash 2WD 4x4 Rustler 4X4 VXL Stampede 4X4 Hoss 4X4 Replace 5862 (Navy Blue)

  • These RC shocks are Perfect Compatible with 1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which provide the car ultimate reliability and performance.
  • 4 RC Shock Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws. Replacement of 5862 Big Bore Shock Set with Springs.
  • Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
Check Stock

Nvollnoe for iPhone 13 Pro Case with Card Holder Heavy Duty Protective Dual Layer Shockproof Hidden Card Slot Slim Wallet Case for iPhone 13 Pro for Men&Women Blue

  • This iPhone 13 Pro phone case perfectly fits the iPhone 13 Pro 6.1 inch ONLY. Not for iPhone 13 6.1 inch /13 pro max 6.7 inch..
  • Dual-layered Extreme Protection: Outer cover hard PC and inner shell soft TPU,deflects shocks and absorbs impacts.Lifted edges at camera and screen of....
  • Hidden Card Slot Design: Slim down your wallet, store up to 2 cards,carry your ID and credit card instead of dragging your huge wallet everywhere,with....
  • Sleek exterior is easy to slide in and out of pockets. Wireless Charging without having to remove the case. *Reminder: Please remove all cards from....
  • Precise Cutout: The cutout fits each button, camera ,speakers and ports precisly, easy to press and access. Package include one iPhone 13 Pro card....
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4×4 shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • Perfect compatibility—–The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set—2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality—CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note—There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4×4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

EPINON for 1/10 Traxxas Slash Shocks Stampede Rustler Bandit Hoss All Aluminum Front & Rear Shocks Upgrade Parts RC Truck Replace Traxxas 5862 (4Pcs Blue)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TIN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2×Alloy front shock absorber (Total length:100mm/3.9") & 2×Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×Front shock, 2×Rear shock, 8×Screws, 4×Washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

EPINON All Aluminum Front & Rear Shocks for 1/10 Traxxas Slash 2WD/4x4 Stampede Rustler Bandit Hoss Upgrade Parts RC Truck Replace Traxxas 5862 (4PCS Green)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TiN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2x Alloy front shock absorber (Total length:100mm/3.9") & 2x Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×front shock, 2×rear shock, 8×screws, 4×washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

EPINON All Aluminum Front & Rear Shocks for 1/10 Traxxas Slash 2WD/4x4 Stampede Rustler Bandit Hoss Upgrade Parts RC Truck Replace Traxxas 5862 (4PCS Blue)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TiN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2x Alloy front shock absorber (Total length:100mm/3.9") & 2x Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×front shock, 2×rear shock, 8×screws, 4×washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock