PHOTOOLEX Speedlite Camera Flash for Canon Nikon Sony Panasonic Olympus Fujifilm Pentax Sigma Minolta Leica and Other SLR Digital SLR Film SLR Cameras and Digital Cameras with Single-Contact Hot Shoe
- High-performance speedlite with a guide number of 35 (ISO 100/1m) works as a continuous light and could also output a total of 150 Lux (Max. 0.5m)..
- Support manual mode, S1 and S2 wireless flash trigger modes, Metal hot shoe, 2.8 seconds flash recycle time, Power saving automatic shutdown function, Automatic save function..
- For a test flash, Press the test button to fire a test flash with the current settings or to wake the flash from sleep mode. Press and hold [Mode] and [Test] to reset the flash..
- Power Control: The flash unit has 8 steps of power output control which indicated by 8 pieces of LED lamp for different level..
- What You Get:Photoolex speedlite*1, Protective Pouch *1, Stand *1 and Instruction manual *1,24-month Warranty and Friendly Customer Service..
Check Stock
NEEWER 6.6’/2m TTL Off Camera Flash Speedlite Cord Compatible with Nikon SB-5000 SB-910 SB-900 SB-800 SB-700 SB-600 SB-400 Nikon Z7 Z6 Z6II Z5 D850 Cameras NEEWER 750II NW420 NW655 Z1 Flashes
- 【Off-Camera Flash Control】 The cable provides you with total TTL control for a digital/film camera and flash using the standard ISO shoe connection. Compatible with Nikon SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-400, SB-80DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-22 flashes and compatible with Nikon Z7, Z6, Z6II, Z5, D850, D810, D780, D750, D500, D7500, D5600, D5300, D5100, D3300 cameras.
- 【Eliminate Shadows】 The cable helps achieve off-camera flash photography results without the harsh shadows behind your subjects when using direct flash exposures..
- 【Flash Shoe Mount】 Features a flash connection shoe mount on one end for connecting your camera flash speedlite and a 1/4”-20 threaded hole to connect a tripod stand. Mount your flash on a tripod stand to free your hand from holding the off-camera flash.
- 【Camera Shoe Mount】 Features a camera connection shoe mount on the other end to connect to your camera’s hot shoe. There is a locking mechanism on the side for secure locking..
- 【Durable Coiled Remote Cable】 The off-camera flash shoe cord keeps all on-camera functions of the flash within 6.6’/2m meters. The extended length and durable cable ensure your shooting experience is convenient and free..
Check StockOptical Flash Slave Trigger JJC Hot Shoe Sync Adapter with PC Socket,Optical Sensor & 1/4 -20 Threaded Socket Cold Shoe for All Flashes Speedlight with Standard ISO 518 Hot Shoe-1 Pack
- The flash standard hot shoe on the top is perfectly fit for off-camera flash, microphone, studio light other equipment or devices with standard ISO....
- Optical Sensor: Optical flash slave trigger for lag-free firing of a second flash unit. For shoe-mount flash units-no cord required.
- The PC female outlet on the side, enabling you to trigger flash mounted onto the upper hot shoe and additional flash or studio light (A sync cable is....
- The standard cold shoe on the bottom is compatible with DSLR, mirrorless digital camera, camcorder and other cameras with standard hot shoe.
- The 1/4"-20 Tripod Socket can be mounted onto a tripod with a 1/4"-20 male screw. And the lock nut helps you mount the devices tightly.
Check StockRENIAN Diffusion Gels Filter 6 Packs Kit 15.7x19.6inches/ 40x50cm Lighting Diffuser Film Roll Sheet Photography Video for Led Flash Strobe Light
- Vertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degrees.
- Note: Don't support TTL and the camera menu setting Function.
- Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras，like a9 a7 a7II a7III a7R III a7RII a7SII a6000....
- Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim).
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off..
- Red charging indicator lamp flickers in every 1s.
- The flash unit has 8 steps of power output control which indicated by 8....
Check Stock2Pack Updated Flash Bracket Flash Stand Light Stand Bracket Mount with Umbrella Holder Mount Swivel for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Speedlite Studio Light LED Light
- 2Pack of Flash Bracket for Most Flash Speedlite- This flash bracket combines a universal E Type Flash cold shoe bracket (updated), Swivel light stand....
- Your Expensive Flash will not Fall - Updated Universal Cold Shoe Bracket on top, the cold shoe will catch the flash shoe base firmly without dropping....
- Umbrella Holder Mount- This flash bracket is with a hole with locking screw in middle specially designed for holding umbrella..
- Light Stand Bracket Mount- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20....
- Easy Adjustment- This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different....
Check StockNeewer TT560 Flash Speedlite for Canon Nikon Panasonic Olympus Pentax and Other DSLR Cameras，Digital Cameras with Standard Hot Shoe
- Vertical Rotation Angle: 0~90 degrees, Horizontal Rotation Angle: 0~270 degrees.
- Note: Don't support TTL and the camera menu setting Function.
- Compatible with for Canon Nikon Panasonic Olympus Pentax Fijifilm and Sony with Mi Hot Shoe cameras，like a9 a7 a7II a7III a7R III a7RII a7SII a6000 a6300 a6500 (NOT compatible with Canon EOS Rebel SL3/250D，Rebel T7/1500D 2000D，Rebel T100/3000D 4000D）.
- Power Management: Switch to the ON, the flash will start charging (the charging indicator is dim).
- For a test flash, press the test button. After use, press the ON/OFF to OFF to power off..
- Red charging indicator lamp flickers in every 1s.
- The flash unit has 8 steps of power output control which indicated by 8 pieces of LED.
Check StockNeewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe
- This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
- It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
- 2 pack of 1/4" tripod screw to flash shoe mount adapter.
Check Stock
Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack
- Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
- Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
- Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
- Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
- Material: Metal construction with black anodized for higher durability..
Check StockPixel TF-322 Flash Hot Shoe Sync Adapter with Extra PC Sync Port Dedicated for Nikon DSLR & Flashgun
- Pixel TF-322 Hot Shoe Converter for Nikon, Easy to install - just slide into your camera's hot shoe. This adapter can be used to connect third party flash via standard hot shoe or PC sync cord socket..
- Work with most flash guns in auto mode or manual mode ，Only supports the i-TTL mode of Nikon's original flash..
- The Pixel Hot Shoe Adapter would be a great addition to your studio.Easy to use and would be perfect for any of your photography need..
- This hot shoe adapter is perfect to mount a flash that does not have a sync connector for connection to a PC sync cord. It will allow those cameras to trigger external flashes by using the sync cord..
- Pixel TF322 hot shoe adapter fits all Standard ISO 518-2006 hot shoe flashgun including the SB-900, SB-800, SB-600, SB-80DX, SB-50DX, SB-30, SB-29/29s, SB-28/28DX, SB-27 etc. Not suitable for devices with sync voltage of more than 6 volts.
Check StockAnwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack
- Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
- Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
- A hole with locking screw in middle specially designed for holding umbrella..
- Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
- Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..
Check StockAnwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite (Hot Shoe Flash Stand)
- Universal Camera Hot Shoe Flash Stand for dslr camera,Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
- With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
- A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
- Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
- Package includes 2pcs of camera hot shoe flash stands. Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..
Check StockAnwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack
- Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
- With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
- A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
- Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
- Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..
Check StockIntroduction to Flash Photography
- Altura Photo Softbox Flash Diffuser for Shoe Mount Flash Units..
- EVEN LIGHTING: Reduces harshness and softens shadows. Features an additional internal diffuser for better wrap around light..
- SIMPLE AND COMPACT: Integrated hook and loop fastener strap secures around the flash head. Folds down flat when not in use..
- ONE SIZE FITS ALL: Compatible with most shoe mount flash units (including Canon Nikon Sony Olympus and more). Product Dimensions 6" x 5".
- SATISFACTION GUARANTEED: Backed by Our 90-Day Satisfaction Guarantee..
Check Stock
