HDMI Tester Portable High Definition Network Cable Tester Checker NF-622 LED Indicator to Check Disorder Short Open and Cross Status of HDMI Cables and Hd Wire Test Ideal for Troubleshooting
- 【Application of UT681】UT681 Handheld HDMI Cable Tester is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).It supports two test modes, fast scan mode and full display mode..
- 【Function of UT681】This Cable Tester Checker can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.Support Continuity Test,Short Circuit Test,Crossover Test,Network Cable Test..
- 【Double testing mode】At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen..
- 【Cable Type That Can Be Measured】Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A).
- b.Both ends are HDMI Mini connectors (Type C - Type C).
- c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C).
- 【Safe Tester】HDMI tester support battery low voltage Test.In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down..
Check StockKlein Tools IR1 Infrared Thermometer & RT110 Outlet Tester, AC Electrical Receptacle Tester for North American Outlets
- Product 1: Infrared Thermometer has an optical resolution (distance-to-spot) of 10:1.
- Product 1: Features include targeting laser.
- Product 1: Drop protection to 6.6-Foot (2 m).
- Product 1: Measurement range is -4 to 752-Degree Fahrenheit (-20 to 400-Degree Celsius).
- Product 2: Outlet tester's light sequence on receptacle tester indicates correct/incorrect wiring.
- Product 2: Receptacle tester conforms to UL Std 1436, Certified to CSA Std C22.2 #160.
- Product 2: Operating temp: 32-degrees F to 140-degrees F (0-degrees C to 40-degrees C).
- Product 2: Built to withstand a 6.6-foot (2m) drop.
Check Stock
YHSWE 230+ Battery Storage Organizer AA AAA C D 9V Waterproof Battery Holder Case with Tester (Red) (Red)
- ☑【High Capacity】The battery case can hold 230+ batteries.aa and aaa battery organizer, can hold battery holder specially designed for storing batteries, battery case can hold more than 230+ different types of battery packs and battery tester, suitable for aa, aa, c, d, 9 V, can 30 coin cells. The Battery Organizer keeps batteries organized and stored neatly, and is an excellent professional battery organizer and tester for home improvement items..
- ☑【Flame Retardant】The material of the battery organizer is flame-retardant to prevent fire caused by the burning of the batteries variety pack.aa batteries with case.waterproof containers，Battery storage box with tester - suitable for indoor and outdoor, a good helper at home. It does not take up space and can be placed anywhere..
- ☑【Not Easy to Break】We have specially Thickened the Hinge of the portable battery storage containers to prevent the box from breaking during use and extend the use time of the battery container.household battery storage case.
- ☑【Easy to Open and Close】Press the switch and push it inward to easily open the battery box, put the lid down and it will automatically close.aa batteries with case，battery organizer storage case with tester.
Check Stock
USB Cable Triad Tester, 3-in-1 Data Wire Test Fixture Precise Type-C/Mini USB/Micro-USB USB Cable Triad Tester for Testing Research
- 【Multifunctional Tester】：Multiple ports (USB, Type-C and Micro USB) for checking the charging status and process of your USB device or Type c device. New upgraded multimeter tester maximum voltage and current 32V/5.1A/150W, the tester supports a variety of fast charging detection, the process of electrical signal to monitor the charging protocol to meet the various needs of cell phone users. Can also be used to test the capacity and power of mobile power..
- 【Professional safety protection】: with overvoltage protection, overcurrent protection, undervoltage protection, low energy protection and alarm system. This upgraded USB Type C tester detects safety and maximizes device protection from damage. Automatic output cut-off, audible alarm, sudden power failure to save data..
- 【Newest Upgraded IPS color screen】: The new upgraded version provides 8 LCD main color screen display interface, key switch display interface. Through the new interface settings, support OTG function, monitor the voltage, current, capacity, power, USB’s power, load impedance, D/D-voltage and other data of USB or type c supported devices. Switch multiple interfaces with the click of a button. (Support 180 degree flip screen, 3 kinds of personalized interface!).
Check Stock
Binval Digital Multimeter 2 in 1 USB C Tester LCD Color Display Voltage Current Watt Meter Automatic Detection and Identification of Charging Protocols Covering Display: DC3.6-32V/0-5.1A
- 【Multifunctional Tester】：Multiple ports (USB, Type-C and Micro USB) for checking the charging status and process of your USB device or Type c device. New upgraded multimeter tester maximum voltage and current 32V/5.1A/150W, the tester supports a variety of fast charging detection, the process of electrical signal to monitor the charging protocol to meet the various needs of cell phone users. Can also be used to test the capacity and power of mobile power..
- 【Professional safety protection】: with overvoltage protection, overcurrent protection, undervoltage protection, low energy protection and alarm system. This upgraded USB Type C tester detects safety and maximizes device protection from damage. Automatic output cut-off, audible alarm, sudden power failure to save data..
- 【Newest Upgraded IPS color screen】: The new upgraded version provides 8 LCD main color screen display interface, key switch display interface. Through the new interface settings, support OTG function, monitor the voltage, current, capacity, power, USB’s power, load impedance, D/D-voltage and other data of USB or type c supported devices. Switch multiple interfaces with the click of a button. (Support 180 degree flip screen, 3 kinds of personalized interface!).
Check StockLa Crosse Technology 911-114 Portable Battery Tester , Blue
- Test rechargeable and alkaline batteries.
- Works on: AAA, AA, C, D, 9V batteries batteries.
- Simple Operation in 4 easy steps: Insert one battery into the tester facing the correct polarity.
- Ensure that the battery and the tester are in good contact.
- Press down on the tester to make contact with the battery and refer to the indicator to determine the battery strength.
- Remove the battery from the tester when testing is complete.
Check Stock
Sper Scientific 860040 Turbidity Meter
- ✅High Accuracy&One-Button Lock Reading Function - With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
- ✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
- ✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
- ✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
Check StockLa Crosse 911-65557-INT Portable Digital Battery Tester
- Test rechargeable and alkaline batteries.
- Works for all: AAA, AA, C, D, 9V batteries and Lithium Ion button cell.
- Simple Operation in 3 easy steps: 1) Select Voltage range (1.5V, 1.2V, or 3.0V depending on battery type used, 2) Pull orange tray outward and insert one battery into the tester correct direction of polarity, 3) Slide tray closed for positive connection and LED will display voltage and strength levels. Remove battery when test is complete..
- Multiple types: Select 1.5V for alkaline AA, AAA, C, & D batteries.
- Select 1.2V for rechargeable AA, AAA, C, & D batteries.
- Select 3V for lithium button cell battery.
- Touch contacts on left side of tester for 9V battery.
Check Stock
MXBAOHENG DY-100A Tap Density Meter High Accuracy Tap Density Volumeter Tester
- Powder density is the mass per unit volume.it can be classified as bulk denisty and tap density by different measuring method.Tap density tester is to measure the density of powder has been tapped or packed by standardized and repeatable procedures according to international standards..
- DY-100A,B,C Powder density tester consist of adjustable-speed motor,vibration assembly,micro-computer and micro printer.,etc.It has the feature of compact structure,stable,and easy operation.,etc..
- DY-100A,B,C Powder density tester is based on GB/T5162-2006/ISO3953:1993(tap density measuring of metal powder).For non-metallic powder,This instrument extended seveal functions..
- Such as”vibration amplitude” from 3meter standard extended to 1mm-15mm.
- ”vibration frequency”from 100-300 times per minute extended to 0-300 times per minute.”vibration times”from 3000 times standard extended to 0-99999 times.All of them can be setup freely..
Check StockSilver Epoxy, Electrically Conductive Adhesive, Heat Resistant, AA-Duct 904, 2.5gm Syringe
- Viscosity 200,000 Cp, Shelf Life 4 months At 25 °C 6 months refrigerated.
- Mechanical Properties Hardness, Shore D 83, Appearance Silver.
- Operating Temperature Up to 325 °C, Cure Type Heat cure.
- Cure Time 30 minutes At 175 °C, 1 hour At 150 °C, 2 hours At 125 °C.
Check StockBattery Organizer Storage Case with Tester Battery Box Holder Garage Container Bag Fits for AA AAA AAAA 9V C D Lithium 3V Not Includes Batteries
- Battery Storage Organizer Case: Batteries Holder for 140 batteries with BT168 battery tester. Battery drawer organizer fits for AA AAA AAAA 9V C D....
- H-Q Battery Rechargable Batteries Organizer: Battery holder case made of premium EVA materials which hard shell with shockproof, durable and water....
- Large capacity Battery Storage Holder with Tester for All Batteries : Garage organization holds 8pcs AAAA,8pcs D, 8pcs C, 48pcs AAA, 48pcs AA, 8pcs....
- Lightweight & Portable Battery Box Containers: Case for battery storage with smooth and sturdy 360 degree zipper for easy opening and closing, strong....
- Battery Storage Organizer with tester After-sales Service:If you are not satisfied with the products you received, please feel free to consult us. We....
Check StockNickel Adhesive Electrically Conductive Epoxy 1 Part Heat Cure AA-Bond N02 2.5gm Syringe
- Viscosity at 25 °C cps Soft Paste, Specific Gravity, mixed 3.2.
- Mechanical Properties Hardness, Shore D 88, Reactive solids contents, % 100 Pot Life 30 minutes.
- Volume Resistivity ohm-cm less than 0.038.
- Mixed Viscosity at 25°C, cps Soft Paste.
- Operating Temperature -55 to 175 °C, Cure time 2 hours @ 125°C 1 hour @ 150°C 30 minutes @ 175°C.
Check StockSilver Epoxy Electrically Conductive Adhesive Bonding Heat Cure 1 Part AA-Duct 2979 5gm Syringe
- Viscosity At 25 °C cps 350,000, Shelf Life 4 months At 25 °C, 6 months refrigerated.
- Mechanical Properties Hardness, Shore D 84 Adhesive.
- Volume Resistivity ohm-cm 3 x 10-4, Appearance Silver, Cure Type Heat cure.
- cure time 15 min At 150 °C, or 1 hour At 125 °C.
Check Stock
