Best Shoreline Anchoring - TopShopReview.com

Minute Man Anchor Kit for Storage Shed

This versatile anchoring kit can be used for many purposes such as anchoring storage sheds, guying TV antennas, clothesline poles, fence posts, and small trees..
Includes: Four (4) 15″ length eye anchors with 3″ disk, 50′ of 500 LB test cable and 4 U-Bolts..
Simple installation, complete anchoring materials for most sheds..

Check Stock

bvgauxd 36\ PWC Sand Anchor with Bungee Dock Line Ideal for Jet Ski, Pontoon, Kayak Keeps Securely Near Sandbar or Shallow Water (36)

Never drift away: Length 36” with stainless steel screw auger can go deep into in Shallow Water, Beach or Sandbar to create strong grip to make sure it stays security anchored while you relax on the beach.
Keep it away from threat: Old class anchor causes water currents and waves and makes boat to move around, potential dangerous and even collisions. With us, huge grip with bungee dock line creates a bidirectional pull that will keep your boat securely in one place even in rough waters..
Quality material selected: Poor quality metal causes ugly rust stains from your shiny new boat and makes you tired to clean it out. But, bvgauxd selecting 304 stainless steel as main body material that can enhance sea water corrosion performance and never stain.
Premium corrosion resistance: Pure 304 stainless steel material anchor performs excellent corrosion resistance to oppose moisture erosion damages anchor also suitable for fresh and salt water..
Application instruction: To start, drive the tubular handle downward to deliver the spike blade into the shoreline. Once the Spike is secure, tie it off to the lower ring. To retrieve, tap the tubular handle upward to free the Spike from the shoreline..

Check Stock

IIT 71021 30-Piece Galvanized Steel Tent Pegs-Garden Stakes, 9 Inch, Silver

Ideal for anchoring netting, garden fabrics, twine cloches and other garden structures such as landscaping garden plants.
4mm diameter heavy duty steel rod with galvanized finish for superior rust-resistance.
9" length with 1" hook for attaching rope or for anchoring.
Can be used fro camping for anchoring tents, canopies, tarps or Securing Holiday Decorations on the ground.

Check Stock

Minn Kota 1810452 Talon Shallow Water Anchor 12 ft Black

Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot....
User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard....
Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness....
Talon Remote: Lets you control stow, deploy, anchoring modes, multiple Talon selection and work light.

Check Stock

Set of 2 - Metal and Glass Candle Sconces, 20 Inches High x 6 Inches Deep x 4.75 Inches Wide Each

【SIMPLE PLEASURES】Give your home the quiet breezy feeling of a seaside cabin resort with these shoreline-themed wall-mount candle holders. The matching pair are set in whitewashed fir with hemp-rope accents and a classic scallop shell centerpiece. You can almost hear the waves gently lapping on the shore..
【TWO OF A KIND】welcome guests into your home by flanking the entrance with these decorative wall sconce candle holders that can also accommodate two small potted draping plants or even a shoreline succulent. Inside the home, on either side of the fireplace mantle, they add a decorative touch..
【MULTIPLE USES】Warm up a dark hallway with soft candlelight, or for a funky 80’s ambiance hang one near an electrical outlet just above the wainscoting so the wire is hidden and place a lava lamp on the shelf. You can really explore your creative side with furnishings like these! .
【ORIGINAL, UNIQUE】These pieces are handcrafted so no two are exactly the same. And we pride ourselves on workmanship and quality control. These candle/plant/tchotchke/anything holders will be in your family for many years to come and may even one day be handed down as family heirlooms!.
【CUSTOMER SUPPORT】We specialize in customer satisfaction and we have a full....

Check Stock

Sika Anchorfix-2, super strength anchoring adhesive, Two component anchor system for threaded bars in uncracked concrete, 10.1 fl. Oz

Sika AnchorFix-2 is a two-Component, Solvent- and Styrene-Free, Modified-Acrylic Anchoring Adhesive..
SUPPORTS: It can be used on concrete solid, masonry, steel, hard natural stone, solid rock..
USES: Fast curing anchoring adhesive for rebars / reinforcing steel, threaded rods, bolts and special fastening systems..
PERFORMANCE: High load capacity. Drinkable water certified. Anchoring without expansion forces..
APPLICATION: Applied with standard guns and by experienced professionals.

Check Stock

BoltHold - AK-4 Asphalt Anchor & Anchoring Cement Kit - Four 1500lb Pull Rated SP10-38 Chemical Anchors 5/8 x 6 with EPX2 Anchoring Cement - For Installation of Sheds Carports Bike Racks & More

ASPHALT ANCHORING KIT: Stop wasting time pouring concrete! BoltHold's industrial in-ground anchors and anchoring grout allow you to install anything on asphalt in three simple steps, offering a fast, cost-effective, and reliable solution to asphalt mounting. This AK-4 Kit includes four SP10-38 (3/8"-16 x 6") Zinc-Plated Anchors with a pre-installed 1" long bolt and 1" diameter washer and two bags of EPX2 cement-based Anchoring Grout..
LIGHT-TO-MEDIUM LOAD: Pull rated for 1,500 lb! Designed for a light-to-medium load, BoltHold SP10-38 chemical anchors resist at least 1,500 pounds pull and 1,000 pounds of moderate shear force at ground level. Rated for 200 in-lb rotary torque, the anchor's welded spiral offers a strong bond with the grout, while the washer at the top prevents the anchor from dropping below the surface or being pulled up into the mounting plate when tightening the bolt..
LONG TERM STABILITY: Creates a stress-free bond that lasts! Due to asphalt's weaker nature, typical expansion-type wedge anchors used in concrete won't hold to the pressure. BoltHold anchors solve this problem by embedding deep into the compacted gravel below the asphalt layer to increase the shear resistance and ensure long-lasting stability—perfect for safely installi....

Check Stock

Edwards 3\ Classic Round Post-Green Sold Per PR

CREATE A SPORTS FIELD IN A FLASH: Badminton, Tennis, Football-Tennis, VolleyBall and Water Volleyball. To be Clipped on GARD&ROCK anchoring base (x2 not included).
TELESCOPIC POSTS: to set the height of the net up to 6.6 feet (2 meters) and choose your discipline Indexing and rotation locking to adjust net tension and game direction.
QUICK FIXATION SYSTEM: to easily and quickly mount and unmount your equipment on any type of flat or sloping ground (lawn, stabilised ground, clay surfaces,etc.) To be Clipped on GARD & ROCK anchoring base (x2).
HIGH QUALITY: Anodised Aluminum Net(adjustable from 16,5 to 23ft / 5 to 7m) and STORAGE BAG included PATENTED system.
WORKS WITH OTHER GARD & ROCK PRODUCTS: Anchoring base (428-001) / Stand for center pole umbrella (428-002) / Removable stand for side pole umbrella (428-007) / Sunshade post (428-011).

Check Stock

Lewmar Pro Sport 550 12V Windlass for 1/4 G4 Chain Manual Freefall Maximum Pull 550 lbs Port Side Mounted Gypsy for Boats 20 -30 - 2020201167

SIMPLIFY ANCHORING— Our windlass moves rope/chain with the push of a button. Anchoring has never been easier with our pro-sports windlass kit designed around a highly efficient spur gearbox, using smaller and powerful magnet motors.
EASY TO INSTALL — The Lewmar anchor windlass is quick and easy to install on your boat's deck. It features a Do-It-Yourself above-deck installation and a push button control for easy anchoring.
EVERYTHING YOU NEED — The Lewmar windlass has everything needed for a low-profile, anchoring system. The kit includes a windlass, circuit breaker, toggle switch, base gasket seal, mounting studs and installation wrench for power and sailboats 20'-30'and fits a 1/4" G4 chain.
COMPACT & DURABLE —The Lewmar horizontal windlass doesn't take up too much room on your boat and looks great on your deck. Constructed with tough composite aluminum, our windlass has a 550 lb. maximum pull, a XXXX motor watt and is ideal for boats under 30'..
TRUSTED BRAND — Our windlass kit is from Lewmar, the premiere equipment supplier- designing, manufacturing and distributing innovative, high-quality control solutions worldwide since 1946. Lewmar offers the highest levels of quality in the industry.

Check Stock