Categories

Best Short Band Pass Filter

Rockville Krypton F1 1600w Peak / 400w RMS 4 Channel Amplifier Car Audio Amp

  • Rockville KRYPTON F1 1600w Peak / 400w Dyno-Certified RMS 4 Channel Amplifier Car Audio Amp..
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 100 Watts x 4 Channels 003c1% THD+N. 4 Ohm: 70 Watts x 4 Channels 003c1% THD+N..
  • 4 Ohm Bridged: 200 Watts x 2 Channel. Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc). 2 Ohm: 400 Watts x 4 Channels. 4 Ohm: 280 Watts x 4 Channels. 4 Ohm Bridged: 800 Watts x 2 Channels..
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers. All channels on the amplifier are bridgeable. Digital Voltage Display on Amp. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry..
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob). Adjustable Low Pass Filter: 40Hz – 4KHz. Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter). Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz. 2CH/4CH Input Mode Switch. 8 Volt Preamp Circuitry.
Check Stock

Bandpass Filter, 50Ohms 2.4G 2450Mhz Durable Strong AntiInterference Reducing Noise Lc Pass Filter Replacement Accessories for Bluetooth WiFi Zigbee

  • [FOR 2.4GHz RECEIVER] This filter has low in band insertion loss, with steep cut off characteristics, is dedicated to 2.4GHz receiving device..
  • [HIGH EFFICIENCY] The band pass filter can effectively filter out of band signals, reduce noise and increase dynamic range..
  • [GOOD SUPPRESSION] Good suppression of out of band remote signals, better than products made with PCB bare boards..
  • [SMA INTERFACE] The two ends of the interface are SMA‑M and SMA‑F, which is convenient for connection and less loss..
  • [LESS INTERFERENCE] Use aluminum alloy shielding shell, has less interference and no out of band spurious response..
Check Stock

FILTRETE1000 20x25X4 2PK by FILTRETE MfrPartNo ADP03-2PK-2

  • The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization..
  • Convenient debugging, good selectivity and stability.
  • A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously..
  • With high reliability, stable and reliable working performance.
Check Stock

Five Star LTE Filter Improves TV Antenna Signals - HDTV Antennas Signal Purifier - Filters 4G Signal for a Clear Channels - Reduces Interference from Cell Towers - Pass Frequency 5-599Mhz

  • FILTERS ALL 4G LTE SIGNAL NOISE - Our LTE filter removes all noise caused by 4G cellular signals, letting through only TV signal frequencies between 5-599MHz, which allows you to experience quality, crisp TV with no cellular interference..
  • 4G LTE Filter - IMPROVES TV ANTENNA SIGNALS:4G lte filter removes noise for better picture.
  • Cleaning unwanted RF signal out of HDTV antenna system effectively. HDTV Band-pass filter can remove interference from frequency bands（3G/4G） outside the TV band. It can improve the TV signal..
  • Improves over the air signals by filtering out mobile LTE signal interference (3G and 4G) which can cause intermittent TV signal disruption including weak signals..
  • Simple installation - lte filter for antenna no external power supply required.Head connected to the antenna, tail connected to antenna amplifier or tv. LTE Filter, made only from premium materials, fits any TV antenna or amplifier and improves your signal, giving you crystal clear HDTV every time..
  • WORK FREQUENCY: Pass Frequency：5-599MHz. Cleaning unwanted RF signal out of HDTV antenna system effectively,Signal loss is 3dBi or less. Impendance: 75 Ω.
Check Stock

ANTOP LTE Filter for TV Antenna,5G LTE Filter to Reduce Interference for Purifier Signal,AT-740

  • Filter 3G/4G/5G Signal Noise-ANTOP's signal filter adopts the most advanced filtering technology, which can filter out the interference signal and preserve the TV signal to the greatest extent..
  • Widely Applicable-Designed for Any TV, Amplified TVAntenna, Coaxial Cable Or Splitter..
  • Professional and Reliable Technical Parameters-Pass Band: 5-609MHz.
  • High Quality Material-Zinc die-cast housing and fully shield design to block unwanted interference singal.
  • Easy to Install-No hardware or power supply needed when you install.
Check Stock

Pioneer DEH-S4250BT Car Audio Stereo CD Player Receiver with Bluetooth Aux USB

  • 1-DIN CD tuner with Bluetooth USB connection hanks to the unique Advanced Sound Retriever technology of Pioneer, the sound quality comes as close as possible when playing back the original recording.
  • Spotify and Pioneer Smart Sync app Compatible with Apple and Android smartphones.
  • radio, CD MP3 USB Auxiliary Bluetooth headunit, plays Android.
  • 13-band graphic equalizer High pass filter Low pass filter Direct Sub Drive Subwoofer control RDS PTY, Best Station Memory..
  • The DEH-S420BT is a true high-end car radio. It plays FLAC files and offers a 13-band graphic EQ as well as an integrated MOSFET amplifier with 4 x 50 watt. You can easily connect a subwoofer and/or other amplifiers with additional loudspeakers via the 2 cinch pre-amplifier outputs..
Check Stock

Arturia MINIBRUTE 2S | MIDI USB Desktop Analog Synthesizer/Step Sequencer

  • VCO 2003e1 Hard Sync, VCO1 linear and exponential FM.
  • Low Pass, High Pass, Band Pass, Notch modes..
Check Stock

New Denoise 2.45G 433M 1575M 900M 1090M 433MHz Bandpass Filter SMA Interface for Block Frequencies

  • The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization..
  • With high reliability, stable and reliable working performance.
  • Convenient debugging, good selectivity and stability.
  • A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously..
Check Stock

Channel Master CM-7777HD Amplify Adjustable Gain TV Antenna Preamplifier with LTE Filter | Indoor/Outdoor

  • Works With All Indoor or Outdoor TV Antennas - Can Be Installed Indoor, Outdoor or in Attic Due to its Compact Size and Heavy-Duty Weatherproof Housing.
  • Improves Signal Quality, Decreases Pixilation and May Increase Number of Channels.
  • Includes Built-in LTE Filter - Blocks Interference From 3G, 4G, 5G Smartphones and Transmitters with EMI & FM Out of Band Filtering (Does Not Pass FM Radio Signals to Avoid Over Amplification Issues).
  • Includes Easy Push-Button Adjustable Amplification (17 dB/30 dB) with Flexible USB Powering Options.
  • Trusted Quality: Channel Master Has Been Manufacturing TV Antennas, Amplifiers and Accessories Since 1949 While Offering Best of Class Warranty and Support.
Check Stock

Anti-Interference SMA Interface Band Pass Filter BPF High Reliability Low Loss 433 MHz Block Frequency Audio Accessory

  • Convenient debugging, good selectivity and stability.
  • The filter has the characteristics of low insertion loss, high resistance band rejection and high image attenuation, high power tolerance, low cost and miniaturization..
  • A band-pass filter is a device that allows a particular frequency band to block other frequencies simultaneously..
  • With high reliability, stable and reliable working performance.
Check Stock

California Project

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Check Stock

Keeley Neutrino V2 Classic Envelope Filter Pedal (KNeutV2)

  • Envelope Filter and Auto-Wah for guitar, bass and keyboard.
  • Peak Control: Sets how much “quack” there is, or how smooth you roll.
  • Filter Selector: lets you choose between 3 types of filters: High,Low, and Band Pass..
  • True-Bypass, 9 VDC, 25 mA, 100% analog and made in the USA..
Check Stock

SFB-1500D - Sundown Audio Monoblock 1750w RMS Amplifier

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock