Categories

Best Short Scope Mount

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Picatinny Rail Mount Compatible with Stoeger M3000/M3500 / Benelli SBE/M1/M2 / Franchi Affinity 3/3.5 / Remington 7400/7600 / Weaver 93 | 0 MOA

  • Picatinny rail mount compatible with the following firearm platforms: Remington 7400/7600 | Benelli Black Eagle I/II/M1/M2/Auto/Vinci | Franchi Affinity 3/3.5 | Stoeger M3000/M3500.
  • Package includes both #6 standard screws and .335” OAL screws to match different receiver hole patterns.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Evike - Avengers Tactical 3X Magnifier Scope with QD Flip-to-Side Mount

  • Great for use with red dot optics, or as a stand-alone short range spotting scope.
  • Fits all Picatinny and Weaver 20mm accessory rails.
  • Mount flips to the side if you pull it back and move it.
Check Stock

Sks, Aks, Ak-47 Owner's Manual

  • 【Light-weight & Metal Side Rail Mount】：RTMGOB side rail mount, made of premium aluminum alloy, CNC-machined, finished and anodized, solid and durable to mount on 47 model.
  • 【Quick Detach Side Scope Mount】:The side scope mount can be quick detached from side plate receiver. Desiged with a quick-detach lever and spring-loaded adjustment part. Press on the lever button lower part for quick unlocking the mount while move the lever to another side. Then press the spring-loaded part and roll out the screw to detach the scope mount, no tools needed.
  • 【Side Picatinny Rail Mount】: The side mounted rail is standard picatinny rail for mounting red dot, sights, optic scope, flashlight, and other tactical optic accessories. The side rail mount has 17 rail slots and 8 drilled holes, covenient for mounting red dot scope, and allows sight cowitness.
  • 【Easy-to-mount Side Mount】: The scope mount can be easily mounted on 47 model. Before mounting, pull the lever upward, slide onto the side plate, tighten the scope mount by pressing the spring-loaded part and rotating the screw to adjust tightness, and finally push the lever to the right to lock the mount. The mount once settled stably and tightly, would not slipping off and shaking.
Check Stock

Monstrum Marksman 1X Prism Scope | Flat Dark Earth

  • The Monstrum Marksman 1x Prism Scope is a prism scope optic with a true fixed 1x magnification.
  • Offers similar functionality to 1x red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop the same platform as our 3x Marksman prism scope, it comes with an integrated 1.5 inch riser mount for true co-witnessing with your front sight and mounts to any standard picatinny mounting platform.
  • The Marksman 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Thorn 30mm / 1 inch Quick Release Cantilever Picatinny Scope Mount QD Lock

  • Quick release scope mount ,allow up to 2 inches of forward scope positioning.
  • QD scope mount,quick release design allow for fast mounting.
  • Quick replease scope mount ,Lightweight 6061 grade aluminum construction.
  • QD scope mount ,mounts to any flat top Picatinny rail equipped rifle.
  • Thorn cantilever scope mount ,package include 1 pair adapter.
Check Stock

HIRAM 4-16x50 AO Rifle Scope Combo with Green Laser, Reflex Sight, and 5 Brightness Modes Flashlight

  • ULTIMATE 4-IN-1 COMBO: Includes the 4-16x50 rangefinder rifle scope for long-range targets, our trusted holographic reflex sight for short to medium range targets, green laser pointer for short-range/close quarters, and a 200-Lumen LED tactical flashlight for dark environments..
  • 4X - 16X MAGNIFICATION: Adjustable zoom rangefinder riflescope with parallax from 15 yards to infinity providing ultra-clear vision and precision performance for hunting and shooting range practice. Adjustable windage & elevation..
  • MULTIPLE RETICLES: Rangefinder reticle crosshairs with red & green modes and 5 light settings (high/ medium/ low/ strobe/ SOS) to accommodate various light conditions from dawn to dusk..
  • REFLEX SIGHT: Alternate top-mounted dot sight with 4 reticle patterns and red/green modes with unlimited brightness levels make this scope combo the most versatile optical advantage at any target distance..
  • ALL-WEATHER ARMOR: Nitrogen-filled for 100% waterproof, shockproof, and fogproof performance. Picatinny/Weaver scope mount easily attaches to any 22mm rails, includes scope rings for simple install/removal and flip-up lens caps for effortless protection..
Check Stock

Wheeler 1-Piece Bolt Action Scope Mount - 30mm High Scope Mount for Remington 700 Long Action Rifles - 6-Hole Design with Integral Rings and Anti-Cant Indicator for Leveling and Shooting

  • SPECS: This Wheeler 1-piece bolt action scope mount with 30mm rings in high height is compatible with Remington 700 long action rifles. Base features 6-40 threads.
  • ACCURATE: Finding the right height can help make your rifle more accurate. With 20 MOA, Wheeler 1-piece bolt action scope bases help zero in sights for shooting long distances..
  • CONVENIENT: Installation is easy with a 1-piece scope base. The flip-down anti-cant device can be posted on the front or rear ring to ensure a level mount..
  • DURABLE: A 6061 aluminum matte black base makes for a solid, yet lightweight design. Clamping force is increased with a 6-hole ring design..
  • EXPLORE: Caldwell offers a variety of 1-piece scope bases, including: Remington 700 short action, Remington 700 long action, Savage 10, and Savage 110 models..
Check Stock

Air Venturi 4x15 Air Rifle Scope and Lasso Mount, BB Gun Scope Attachment

  • AIR GUN SCOPE: The 4x15 Air Rifle Scope and LASSO Mount is a perfect scope attachment that helps any air gun user have better range and optics on their air rifles. Use this scope to instruct beginners, or buy it for a veteran air rifle master..
  • AIR GUN COMPATIBILITY: This high-powered Air Rifle Scope and LASSO Mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots..
  • HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.37 lbs, making this a lightweight rifle scope that's easy to carry around. The included adjustable scope rings help you find the right fit on your air rifle..
  • INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach the air gun scope on top of the mount..
  • AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

Sniper VT 1-6X28 FFP First Focal Plane (FFP) CQB Scope 35mm Tube ED Optics System with Red/Green Illuminated Reticle Fit .223 5.56

  • First focal plane Scope, Glass etched reticle, this optics is ideally suited for use in short to medium range applications, 400+ Yards.
  • Build on a very durable 35mm aircraft-grade one-piece tube construction.
  • Rifle scope providing crystal clear targeting at 1-6x magnification, with a 28mm objective diameter and an eye relief of 3.4-3.8 Inches.
  • Capped reset turrets are finger adjustable with 1/2 MOA clicks that can be reset to zero after sighting in..
  • Scope package includes VT1-6X28FFP Scope and Mount, Switchview Throw Levers, Sunshade, Battery..
Check Stock