General Components Bison 2000A Forced Air Heater - 12V, 2 kW Gasoline Heater with Digital Controller - Parking Bunk Heater for Trucks Car Boat Bus SUV RV Cabin – Easy to Install

  • 【Large Baking Area】Our paint dryer lamp can baking an area about 60 x 80 cm, and the working temperature is adjustable range from 140-158 ℉(60-70℃). Fitted with the powerful 2100W short wave infrared lamps to let heat pass back through the coating via conduction, it is more efficient than traditional far-wave infrared heating, which can save your working time while avoiding energy waste..
  • 【Design】Our paint baking lamp has a 360-degree rotatable lamp head, which is convenient for you to paint all parts of the car.
  • move the lamp head up and down to adjust the height of the paint lamp.
  • comes with 4 swivel wheels so you can move anywhere..
  • 【Environment Protection】Our shortwave infrared paint baking lamp release no hot air and without secondary pollution, which is more friendly to the environment. And equipped with a timer, the baking time can be adjusted from 1-60 minutes, you can freely set the baking time according to the spray paint surface..
  • 【Various Application】Our infrared paint curing lamps are widely used in the auto spray paint room, local paint drying, furniture drying, drying putty, metal processing industry, advertising industry, etc. It is the best auxiliary tool for car maintenance..
Check Stock

DATOUBOSS Handheld Infrared Paint Curing Lamp 1000w Shortwave Infrared Paint Lamp Paint Baking Dryer Car Body Repair Tool (110V)

  • 【CURING AREA】The infrared paint baking lamp can solidify 300*150mm (11.8*5.9 in), and the working temperature can reach 60-80¡ãC (140-176¡ãF). Equipped with a powerful 1000W shortwave infrared lamp, which can make heat flow back through conduction coating..
  • 【SHORTWAVE INFRARED HEATING】 Shortwave infrared has high luminous efficiency and strong penetrating power.Anti-interference. High thermal efficiency penetrates the paint layer, drying from the inside out, Therefore, the surface gloss of the paint is high and the coating adhesion is strong.Greatly reduce wrinkles and tears and avoiding rework..
  • 【HIGH HEAT DISSIPATION PERFORMANCE】The infrared paint curing lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life..
  • 【VARIOUS APPLICATION】The infrared curing heating lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, and it is the ideal paint tool for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying..
  • 【VINYL CAR Wrap Baking】The car paint ....
Check Stock

DATOU BOSS Infrared Paint Lamp 2000W Short-Wave Infrared Heating Lamp for Body Repair Paint Curing System Paint Booth Available 2022 Upgrade Model Solve The Problem of Circuit Instability in 2021

  • 【SHORTWAVE INFRARED HEATING】 Shortwave infrared has high luminous efficiency and strong penetrating power.Anti-interference. High thermal efficiency penetrates the paint layer, drying from the inside out, Therefore, the surface gloss of the paint is high and the coating adhesion is strong.Greatly reduce wrinkles and tears and avoiding rework.
  • 【DESIGN WITH REFLECTOR】The interior uses a specially designed reflector with high reflectivity, which makes the heat distribution more uniform and increase curing area ,shortens the curing time.
  • Shortwave infrared tube with high luminous efficiency, strong drying ability.
  • 【HIGH HEAT DISSIPATION PERFORMANCE】The paint lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life..
  • 【EASY OPERATION】The infrared paint curing lamp equipped with rotating lamp housing and stable adjustable metal tube construction, it is very convenient and safe..
  • 【VARIOUS APPLICATION】The Infrared curing lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, and it is the ideal paint tool for spot repair....
Check Stock

DATOUBOSS Infrared Paint Baking Lamp 2000w Paint Curing Dryer Shortwave Infrared Paint Drying Lamp Car Body Repair Paint Curing Systems with Bracket

  • 【SHORTWAVE INFRARED HEATING】 Shortwave infrared has high luminous efficiency and strong penetrating power.Anti-interference. High thermal efficiency penetrates the paint layer, drying from the inside out, Therefore, the surface gloss of the paint is high and the coating adhesion is strong.Greatly reduce wrinkles and tears and avoiding rework..
  • 【DESIGN WITH REFLECTOR】The interior uses a specially designed reflector with high reflectivity, which makes the heat distribution more uniform and increase curing area ,shortens the curing time.
  • Shortwave infrared tube with high luminous efficiency, strong drying ability.
  • 【HIGH HEAT DISSIPATION PERFORMANCE】The infrared paint lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life..
  • 【EASY OPERATION】The infrared paint curing lamp equipped with rotating lamp housing and stable adjustable metal tube construction, ball bearing rollers with parking brake, it is very convenient and safe..
  • 【VARIOUS APPLICATION】The infrared baking lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking b....
Check Stock

DATOUBOSS Infrared Shortwave Paint Curing Lamp 1000W Infrared Paint Curing Dryer Car Body Repair Tool with Bracket…

  • 【Curing Area】This paint baking lamp can cure 30*20cm (11.8*7.87in), and the working temperature can reach 0-100℃(0-212F). Equipped with a....
  • Timing Function】0-90 minutes intelligent timing function, automatically stop curing and heating at that time, which can effectively avoid curing and....
  • 【Infrared Shortwave】Infrared shortwave adopts quartz halogen infrared tube, high luminous efficiency, strong penetrability, less visible light,....
  • 【Heat Dissipation Performance】It adopts anti-corrosion aluminum alloy shell, metal mesh cover and 2 metal side covers with cooling hole design. It....
  • 【Widely Application】Infrared curing lamps are widely used in car spray booths, partial paint drying, putty drying, and car spray booths. It is an....
Check Stock

DATOU BOSS Infrared Paint Curing Lamp 1000W Shortwave Infrared Heat Lamp for Car Body Repair Paint Curing Systems,IR Lamp for Paint Tools,Portable Infrared Paint Curing Lamp,Heat Lamps for Paint Booth

  • 【CURING AREA】The infrared paint baking lamp can solidify 300*150mm (11.8*5.9 in), and the working temperature can reach 60-80¡ãC (140-176¡ãF). Equipped with a powerful 1000W shortwave infrared lamp, which can make heat flow back through conduction coating..
  • 【SHORTWAVE INFRARED HEATING】 Shortwave infrared has high luminous efficiency and strong penetrating power.Anti-interference. High thermal efficiency penetrates the paint layer, drying from the inside out, Therefore, the surface gloss of the paint is high and the coating adhesion is strong.Greatly reduce wrinkles and tears and avoiding rework..
  • 【HIGH HEAT DISSIPATION PERFORMANCE】The infrared paint curing lamp is made of aluminum alloy, the front uses aluminum alloy mesh, and the back uses aluminum alloy sheet with countless small holes, which greatly enhances the heat dissipation function and effectively improves the service life..
  • 【VARIOUS APPLICATION】The infrared curing heating lamps are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, and it is the ideal paint tool for spot repairs, engine drying, adhesive stripe removal, drying filler, drying primer or just preheating prior to spraying..
  • 【VINYL CAR Wrap Baking】The car paint ....
Check Stock

DATOU BOSS Infrared Paint Curing Lamp 1000W with Timer Shortwave Infrared Heat Lamp for Car Body Repair Paint Curing Systems,Body Repair Paint Tools,with Adjustable Bracket,Heat Lamps for Paint Booth

  • ✨【Curing Area】This paint baking lamp can cure 65*50cm , and the working temperature can reach 60-80℃ (140-176℉). Equipped with a powerful 2000W shortwave infrared lamp, which can make heat flow back through conduction coating..
  • ✨【Timing Function】0-90 minutes intelligent timing function, automatically stop curing and heating at that time, which can effectively avoid curing and heating for too long and causing damage (set the time as needed).
  • ✨【Infrared Shortwave】Infrared shortwave adopts quartz halogen infrared tube, high luminous efficiency, strong penetrability, less visible light, low glare.
  • heating directly from the inside, shortening the curing time, and high working efficiency.
  • ✨【Heat Dissipation Performance】It adopts anti-corrosion aluminum alloy shell, metal mesh cover and 2 metal side covers with cooling hole design. It is more durable than plastic shell at high temperature and improves the heat dissipation efficiency to avoid high temperature damage..
  • ✨【Widely Application】Infrared curing lamps are widely used in car spray booths, partial paint drying, putty drying, and car spray booths. It is an ideal tool for on-site repair, engine drying, strip removal, and drying. And we are the production factory, if you nee....
Check Stock

MFUZOP Infrared Paint Curing Lamp 3×1000W Shortwave Infrared Heat Lamp for Car Body Repair Paint Curing Systems Body Repair Paint Tools,Heat Lamps for Paint Booth

  • 1.☁【High heat dissipation performance】This paint lamp is made of high-quality aluminum alloy, with clear integration effect, not easy to oxidize, and excellent heat dissipation effect, durable and long service life..
  • 2.☁【Short-wave infrared heating】Short-wave infrared has high luminous efficiency, strong penetration, and high thermal efficiency. The paint layer is dried from the inside to the outside, so the paint surface has high gloss and strong coating adhesion. Greatly reduces wrinkles and tears and avoids rework..
  • 3.☁【Safety Guarantee】The power of the paint lamp is 3000W, 110V, and the automatic safety overload is for safety guarantee. This heating lamp will not release hot air and secondary pollution, which is very convenient and safe..
  • 4.☁【Easy to Install and Operate】This lacquer light comes with a rotating lampshade and a stable adjustable metal tube structure, ball bearing rollers with parking brake, very convenient and safe..
  • 5.☁【Wide application】Widely used in automobile paint spray booth, partial paint drying, heater, printing dryer and various drying equipment, furniture paint and other fie.
Check Stock

Duraflame DFI-30631-05 InfraGen Quartz And Halogen Panoramic Heating 3D Effect Stove Heater w/ Remote For Rooms Up To 1,000 Sq Ft Gray

  • Far-infrared Radiation Heating: Infrared paint curing lamp adopts far-infrared radiation heating technology, with its heating speed increasing by 60%....
  • Automatic Overload Protection: This infrared curing only heats objects that are placed in its path, directly focusing energy where it’s needed.....
  • Adjustable Distance & Temperature: The working distance of this auto body heat lamp is 600-800mm/23-31in, and the temperature is adjustable range from....
  • Environmental Friendly: This paint heat lamp features a fast heating speed and high thermal efficiency. It is environmentally friendly, and there is....
  • Easy Operation: Our infrared heater is equipped with extra halogen lamp for your replacement, and adjustable metal tube and covers with balls and....
Check Stock

Solary Infrared Curing Lamp, 2100W 110V Short Wave Paint Heating Light for Car Bodywork Repair, Movable, Height Adjustable and with Smart Timer

  • 【High Quality】 The lamp shade of this paint lamp is made of 304 stainless steel, has a clear energy collecting effect and is hard to oxidize. The radiator is made of die-cast aluminum and has an excellent heat dissipation effect. It is durable and has a long life..
  • 【Shortwave Infrared Heating】 The paint baking lamp adopting shortwave infrared, it has high luminous efficiency and strong penetrating power. Let the paint dry quickly. Due to its high thermal efficiency, it penetrates the coating layer and dries from the inside to the outside, improving the surface gloss and adhesion of the coating and significantly reducing wrinkles and gaps..
  • 【Intelligent Timing】 This baking infrared paint curing lamp can burn a large painted area, a smart timer that can be adjusted from 1 minutes to 30 minutes. The baking time can be freely set according to the spray surface. Equipped with two 1050W shortwave infrared halogen lamps with excellent durability..
  • 【Easy to Operate】 This paint curing dryer is equipped with a pulley that can be easily moved. The height can be adjusted by moving the lamp head up and down, and the lamp head can rotate, which is very convenient for operation in narrow spaces..
  • 【Versatile】 Shortwave infrared heat lamp are widely u....
Check Stock

Bestauto Infrared Lamp 3000W Electric Heater 220V Heater Body Suit, Heat Lamp,2 Set Inflatable Paint Booth with Automatic Safety Overload Protection Infrared Heater for Far Infrared Radiation Heating

  • 【FAR INFRARED RADIATION HEATING】- Infrared paint curing lamp has adopted the technology of far-infrared radiation heating, heating speed of this infrared lamp cure time is 60% to 80% faster hence the paint is cleaner..
  • 【AUTOMATIC SAFETY OVERLOAD PROTECTION】- This infrared curing only heats objects that are placed in its path, directly focusing energy where it’s needed. Besides the automatic safety overload protection is for safety assurance..
  • 【DISTANCE &TEMPERATURE AUTOMATIC MEASUREMENT】- A working distance of this auto body heat lamp is 600-800mm/23-31in and the temperature is adjustable range from 32-212 ℉(0-100 ℃)..
  • 【ENVIRONMENTAL PROTECTION】- Features fast heating speed, high thermal efficiency this heater lamp is environmental protection, no hot air, and secondary pollution and avoid secondary pollution is effectively avoided..
  • 【EASY OPERATION】- Our Infratech-heaters equipped with rotating lamp housing and stable adjustable metal tube construction, ball-bearing rollers with the parking brake, it is very convenient and safe..
Check Stock

Bestauto 2000W Baking Infrared Paint Curing Lamp Short Wave Infrared Heater Car Bodywork Repair Paint Dryer/Stand

  • Far Infrared Radiation Heating: The 2000W heater has a temperature range of 104-167℉/ 40-75℃, better for different materials. Our machine has adopted the technology of far-infrared radiation heating. Thus, the heating speed of this infrared lamp cure time is 60% to 80% faster. The metal structure is durable and sturdy..
  • Large Drying Area: This electric paint dryer lamp can bake an area of 31.5x31.5 in/800x800 mm. The working distance can be 23-31 in/600-800 mm, ensuring a secure but effective operation..
  • Overload Protection: Infrared paint curing lamp has automatic overload protection for security. The system is designed to avoid burn-in and prolong the service time of the machine..
  • Easy Operation & Installation: The thoughtful details of the baking lamp include a sturdy base to hold the 62.5" long stand, 3.9in -66.9in(0.1 - 1.7m) lifting height, 360-degree rotating lamp housing. The lockable wheels achieve quick and smooth moving..
  • Various Application: Our infratech-heaters are widely used in the auto spray paint room, local paint drying, drying putty, car spray baking booth, the heater, printing drying machine, various drying equipment, furniture paint, and other fields..
Check Stock

Silver Conductive Epoxy Adhesive, 1.0ML Electrically Conductive Adhesives for Repair Conduction Paint Connectors Board Paste Wire

  • Easy to use -- The pure silver powder medium of conductive silver paint has excellent electrical conductivity and moisture resistance and dryness..
  • Strong adhesion -- The silver glue has excellent adhesion and covering power on various materials such as PC, PET, PVC, PU and other films, resin plates, coated paper, glass, copper sheets, aluminum plates, etc..
  • Features -- The conductive adhesive silver glue has the feature of strong adaptability, stable conductivity, single component, low temperature curing, excellent adhesion and extremely low square resistance..
  • High‑purity silver -- This conductive silver paint is a high‑purity silver, low resistance, fast‑drying product, with controllable conductivity, low‑temperature curing and has a good electromagnetic wave shielding effect..
  • Application -- The conductive adhesive silver glue is widely used in home supplies, electrical items, CPU in computer, LED display, LCD display, optical fiber communication equipment, controller, heat sink and led etc..
Check Stock