Categories

Best Siding Shims

Composite Shims for Indoor/Outdoor Use, 40 Pack Heavy Duty Never Rot Plastic Wedge Shims for Leveling, DIY Furniture Levelers for Home Improvement, Table, Furniture, Doors, Windows, Sheds, Toilet

  • Strong & Durable: Plastic wedge shims are made of high quality PP plastic that can be stacked to suit your needs. The shims provide 30% more load support and pressure than wood shims. Perfect for professional and personal use, leveling, repairs and furniture renovation projects..
  • Never Rot Shims: These shims use materials that are waterproof and durable. Unlike wood shims, they will not rot, warp, swell or crack under harsh or extreme outdoor conditions. Long service life..
  • Multi-purpose Wedges: Composite shims can be used indoors and outdoors. Using heavy-duty shims for leveling, furniture, plumbing, appliances, cabinets, countertops, doors, windows, toilets, decks, fountains, gazebos, mailboxes.
  • No More Cutting: Total length: 3.86 in, 0.78 in wide and 0.27 in high. Table shims have 32 pre-punched lines. Compared with ordinary shim, our wedges do not need additional cutting or trimming, saving you time and energy. It can also level your furniture without compromising aesthetics..
  • Rich Quantity: You will get 40 packs of composite shims. Whether you are a professional or just usually carry out some home improvement projects, you can break it according to your needs and place it where it needs to be leveled. Maintain the balance while reducing exposur....
Check Stock

Vinyl Siding Hooks (10 Pack), Heavy Duty Stainless Steel Vinyl Siding Hangers, Low Profile No Hole Siding Clips for Hanging Lights Wreath Decorations Outdoor

  • NO HOLE OR DAMAGE TO SIDING - Clip in design makes it possible to match most types of vinyl siding without drilling nails or screws into your sidings. Simply insert these vinyl siding hangers into the seam of vinyl siding for effortless siding space organizing. It requires no skill or tool for installing and removing..
  • EASY TO REMOVE AND RELOCATE - To remove the vinyl hook, simply roll it outward from the siding seam. It will leave no hole or damage to your siding. It takes seconds to finish installing a vinyl hook to your siding. The integrity of your sidings stays intact with many hanging opportunities at your fingertips..
  • HIGH QUALITY STAINLESS STEEL - These siding hooks will not rust or deformed as is made of heavy duty 304 stainless steel. Compared with plastic type and competitors' cheap metal hook, our siding hooks are assured with better performance and durability. These are ideal hooks for adding vivid colors to your sidings at parties and festivals..
  • EACH HOOK HOLDS UP TO 12 LBS - Vinyl siding clips have passed factory test of 12 lb weight max loading. Coming in a genuine value 10 pack, these vinyl siding clips allows you to maximize your siding space decoration with signs, plaques, lights, ornaments, holiday/seasonal decorations and more..
Check Stock

Nelson Wood Shims CSBP56 Cedar Shims 56 Count

  • Shims are 8" long and tapered from 5/16" down to 1/32".
  • 6 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet.
Check Stock

Lab Shims Lab Security Shelf Bracket LSM025

  • HIGH PERFORMANCE: Our shims have thin-feathered tips, making them easy for use. We pride ourselves in keeping a clean, consistent, and dependable quality among all of our products. Throughout the manufacturing process, we hand-sort our shims to ensure that there are 100% useable shims..
  • NATURAL WOOD: We have no chemicals, additives, fumigation, or treatment added to any of our products..
  • PACKAGING: Our cartons keep shims organized and stored between uses, so you don't have to worry about the shims being damaged or misplaced..
  • BULK PACK: For larger projects and frequent users, we offer a bulk pack of our product..
  • 100% KILN DRIED: As a consumer, you shouldn't have to worry about molding or rotting. Hence, keeping our products kiln dried prevents this exact thing from happening..
Check Stock

Vinyl Siding Hooks for Hanging, Heavy Duty Outdoor Decorations Siding Hanger, Metal No Hole Needed Vinyl Siding Clips (8 Pack)

  • NO HOLES or TOOLS Required: To install simply roll the vinyl siding cable hooks into any seam in your home vinyl siding. It’s that easy, No drilling, No screws or No nails, No damage to siding..
  • STURDY and DURABLE: This no hole needed hooks vinyl siding hangers are made of premium quality heavy-duty 304 stainless steel for extra durability and long-lasting service life. Will never rust or stain your siding.
  • SIMPLE TO INSTALL, easy to remove and easy to relocate thanks to their low-profile slight bend design that easily rolls into any seam in your vinyl siding..
  • HEAVYWEIGHT SUPPORT: Unlike most siding hook hangers, VINYL SIDING HOOKS stainless-steel siding protect clips hanger boasts an extra thick design, 1mm and supports up to 12 lb per hook. Will never fall off/ down or damage your vinyl siding..
  • VERSATILE PACK: Coming in a generous pack of 8 no-hole vinyl galvanized steel hooks, this vinyl siding light hooks set provides you with a great way hold and decorate your walls with signs, wooden plaques, wreath, outdoor lights, ornaments, garland, holiday decorations and more. Perfect tools for adding vivid colors on your siding during parties and festivals.
Check Stock

Steel Shim Stock Rolls - 16a1 .001 steel shimstock 6\x10

  • Shims are 8" long and tapered from 5/16" down to 1/32".
  • 6 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet.
Check Stock

TUFFBOY 8” Composite Shims for Indoor/Outdoor use. 12 Pack Heavy Duty Never Rot Wedges, Extreme Load Support, Easy to snap DIY Levelers for Home Improvement, Furniture, Doors, Windows, Sheds and More.

  • SUPER STRONG AND DURABLE: TUFFBOY Plastic wedge shims are stackable and made of 100% high quality recycled plastic materials, that has a 30% more load support and pressure than wooden shims, making it perfect for all your leveling, repairs, and home improvement projects..
  • INDOOR/OUTDOOR MULTI-USE WEDGES: The 8-inch composite shims can be used for a wide variety of different projects both indoors and outdoors. Use TUFFBOY Heavy Duty Shims for Leveling, Plumbing, Appliances, Cabinets, Countertops, Doors, Windows, Furniture, Decks, Spas, Fountains, Gazebos, Mailboxes and more!.
  • NEVER-ROT AND WEATHER PROOF: The Durable material of these Never Rot shim levelers is Water proof and resistant to decay. Unlike wooden shims, these plastic shims will not rot, warp, swell, crack, or split, holding up to rain, show and other tough or extreme outdoor conditions. TuffBoy composite shims will last you a lifetime..
  • EASILY & CLEANLY BREAK TO ANY SIZE: These 8” Plastic wedges are 4 times easier to snap than wood. With 37 Pre-scoured lines snapping is super easy and there is no need for additional cutting or trimming, saving time and energy. No tools required, simply measure and snap..
  • VALUE PACK OF 12 (Made in USA): This economy pack of 12 (1 dozen) pre-scored composite ....
Check Stock

Handi-Shim, White HS1840WH Plastic Construction Shims/Spacers, 40 Pack, 1/8-Inch, 40, 40 Count

  • Cost 20 Percent less than the average shim and are available in four color-coded thicknesses and 15 combinations of sizes and quantities.
  • Handi-Shims form a secure, flat base with only one shim (not needing to overlap two wedge-shaped shims).
  • Made of plastic, Handi-Shims resist compression, will not rot, and can be reused in many applications.
  • Handi-Shims can serve as high-precision spacers and scribes.
  • Handi-Shims can be easily and neatly cut into smaller units for small-scale jobs and can be easily secured using a pre-drilled screw hole.
Check Stock

Vinyl Siding Tools 2 Pack –7 Inch Heavy Duty Vinyl Siding Repair with Durable Steel, Vinyl Siding Removal Tool for House Siding Installation, Avoid Damaging Vinyl Siding (2)

  • ✅HIGH-QUALITY VINYL SIDING TOOLS – This heavy-duty siding removal tool is made with durable steel construction that won't bend or break after a couple of uses and will last for years. It makes repairs a snap, allowing you to replacement or repair vinyl siding on a house or outbuildings and fix your problem in a minute..
  • ✅QUICK AND EASY SIDING REMOVAL - Are you searching for the right tool that will help you to remove vinyl siding? Save your time and money by cleanly removing vinyl siding, with this zip tool that allows you to get under the top and bottom edges of the vinyl siding pieces. How cool is that?.
  • ✅THIS TOOL WORKS WONDERS - Compared to other similar siding removal tools, this one has extra-long handle with bending strength reinforcement for extra reach and leverage making the job take the minimum of effort. What's more this great is that now instead of one you’ll getthis pack of twotools for vinyl, making it particularly helpful if you've got another pair of hands to help you..
  • ✅COMFORT GRIP-With a smooth unlocking motion, an easy-to-grasp straight handle, and a non-slip textured grip makes this zip tool vinyl siding a MUST HAVE when removing damaged siding or replacing vinyl siding, perfect for both professionals and DIY-ers..
Check Stock

8PCS SAPHUE Guitar Neck Shims 4Pcs 0.2mm 2Pcs 0.5mm and 2Pcs 1mm Thickness Brass Shims for Guitar and Bass Bolt-on Neck Repair Gold

  • HIGH QUALITY MATERIAL：Guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck..
  • FUNCTIONS：These shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in....
  • SIZE: The Guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4Pcs), 0.5mm(2Pcs) and 1mm(2Pcs), necessary Luthier Tools for Electric Guitar....
  • WIDELY USED: The guitar neck shims are designed to fit onto most electric guitars and basses. Protect your favourite guitar from corrosion or damage..
  • SATISFACTION GUARANTEE: We stand by our quality commitment and will guarantee you 100% satisfaction of the guitar neck shims. Please do not hesitate....
Check Stock

Vinyl Siding Removal Tool with Extra Long Handle- 7 inches One-Piece Steel Blade Vinyl Installation and Removal Tool - The Ultimate Vinyl Siding Zip Tool - Avoid Damaging Vinyl Siding

  • VINYL SIDING REMOVAL TOOL - Also known as a zip tool, this handy and efficient tool is perfect for not only removing but also for installing and repairing vinyl siding. It does the work all while keeping the vinyl siding and the wall in pristine condition!.
  • 7 INCHES ONE-PIECE STEEL VINYL INSTALLATION AND REMOVAL TOOL - The blade and the body of this siding removal tool is made from a single 7-inch long piece of high-quality, high-strength, and durable steel. Virtually indestructible, this tool is built to last!.
  • EXTRA LONG NON-SLIP RED HANDLE - The handle is not only extra-long, but it’s also more ergonomic, providing leverage, additional reach, and more ease in handling. The red coating aids in softening the grip and making the tool more visible. There are several tools like it, but at almost 2 inches longer than average vinyl siding removal tools, our red-handled non-slip tool brings in solid advantages..
  • AVOID DAMAGING VINYL SIDING WITH THIS ULTIMATE VINYL SIDING ZIP TOOL - What tool have you been using to install and remove vinyl siding? You need to drop all other makeshift tools. This zip tool is the only tool that can perform the job. No other tools and methods needed!.
  • REMOVE OR ATTACH VINYL SIDING IN A SINGLE MOVE - Quick and easy installation ....
Check Stock

(2-Pack) Vinyl Siding Removal Tool Tool with Extra Long Handle - 7 inches One-Piece Steel Blade Vinyl Installation and Removal - The Ultimate Vinyl Siding Zip Tool - Avoid Damaging Vinyl Siding

  • VINYL SIDING REMOVAL TOOL - Also known as a zip tool, this handy and efficient tool is perfect for not only removing but also for installing and repairing vinyl siding. It does the work all while keeping the vinyl siding and the wall in pristine condition!.
  • 7 INCHES ONE-PIECE STEEL VINYL INSTALLATION AND REMOVAL TOOL - The blade and the body of this siding removal tool is made from a single 7-inch long piece of high-quality, high-strength, and durable steel. Virtually indestructible, this tool is built to last!.
  • EXTRA LONG NON-SLIP RED HANDLE - The handle is not only extra-long, but it’s also more ergonomic, providing leverage, additional reach, and more ease in handling. The red coating aids in softening the grip and making the tool more visible. There are several tools like it, but at almost 2 inches longer than average vinyl siding removal tools, our red-handled non-slip tool brings in solid advantages..
  • AVOID DAMAGING VINYL SIDING WITH THIS ULTIMATE VINYL SIDING ZIP TOOL - What tool have you been using to install and remove vinyl siding? You need to drop all other makeshift tools. This zip tool is the only tool that can perform the job. No other tools and methods needed!.
  • REMOVE OR ATTACH VINYL SIDING IN A SINGLE MOVE - Quick and easy installation ....
Check Stock

3 Pcs Guitar Neck Shims Made of Solid Maple Protective Guitar Neck Gasket for Bolt-on Neck 0.25° 0.5° and 1°Degree Guitar Plate for Guitar and Bass Repair

  • 【 FUNCTION 】 Guitar neck shims are used to change the angle of a bolt-on guitar neck for protection purposes. The shims are carefully angled and molded from tapered maple to provide the exact angle of tilt needed without creating an air pocket, thus protecting the guitar's neck and base from wear and damage..
  • 【 PERFECTLY RESTORE YOUR GUITAR OR BASS 】 Our guitar neck shims are ideal for repairing electric guitars and basses. They are made with a highly versatile design and can be easily customized to fit your specific needs by cutting or sanding, to protect your guitar from corrosion and improper angle damage..
  • 【 MADE OF SOLID MAPLE 】 The choice of solid maple for guitar neck shims is preferred over plastic for its better resonance, stability, and ability to produce a more beautiful sound..
  • 【 HARD MAPLE SHIM SET WITH THREE TAPERS 】 A set of three hard maple shims with tapers of 0.25, 0.5, and 1 degree, each with a rectangular shape featuring rounded edges and measuring 55 mm by 75 mm. The approximate taper specifications are 0.76 mm to 0.48 mm for the 0.25-degree shim, 0.71 mm to 0.20 mm for the 0.5-degree shim, and 1.52 mm to 0.25 mm for the 1-degree shim..
  • 【 EASY TO USE 】 To ensure a quick turnaround for a common guitar repai....
Check Stock