Categories

Best Sight Glass Liquid Flow Rate Indicator

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

1' Inline Air Compressor In Line Water Moisture Filter Trap Separator Auto Drain

  • 185 CFM Flow Rate 1" FPT Air Inlet port 1" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.
Check Stock

3/4' Inline Air Compressor In Line Water Moisture Filter Trap Separator Auto Drain

  • 185 CFM Flow Rate 3/4" FPT Air Inlet port 3/4" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.
Check Stock

AM new 17793 Air Compressor Regulator Manifold Assembly Compatible with RIDGID + free E book Design and Repair

  • Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
  • SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
  • Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
  • Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Check Stock

Parker 04L10GB Lubricator, Polycarbonate Bowl, No Drain, 20 scfm, 1/4\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Transparent sight dome for 360-degree visibility.
  • High-flow 1/4" port for a flow rate of 20 cfm.
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

PneumaticPlus SAF400-N06BD-MEP Compressed Air Filter 3/4 NPT 10 Micron - Metal Bowl Auto Drain Bracket

  • Max. Supply Pressure: 250 PSI / Operating Pressure: 0 to 150 PSI.
  • 10 Micron Element/ Flow Rate: 300 SCFM @ 90 PSI.
  • Auto Drain, Metal Bowl w/ Sight Glass, Port Size: 3/4" NPT.
  • Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
  • 1 Year Limited Warranty, Manufactured in Korea.
Check Stock

Parker 17L44BE Lubricator, Metal Bowl with Sight Gauge, Manual Drain, 90 scfm, 3/4\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Transparent sight dome for 360-degree visibility.
Check Stock

Heavy Duty Compressed AIR Filter Regulator Combo Piggyback Metal Bowl Visible Sight Glass 5 Micron Element 3/4 Manual Drain

  • HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK.
  • 250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
  • 5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE.
  • ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT.
  • /4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..
Check Stock

PneumaticPlus SAU400-N04G-MEP Compressed Air Filter Regulator Lubricator Combo 1/2 NPT - Metal Bowl Manual Drain Bracket Gauge

  • Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
  • 10 Micron Particulate Element / Flow Rate: 176 SCFM @ 90 PSI.
  • Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
  • Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Check Stock

Moonshan Liquid Filling Machine 1-118 Oz Bottle Filler Machine Bottling Diaphragm Pump Digital Control for Liquid, Juice, Wine, MCT Oil, Cosmetic Oil, Detergent with Non-drip Single Head GFK-160A

  • 【118 Fl Oz/min Diaphragm Pump】Choosing a liquid filling machine is actually choosing pumps. This liquid filling machine adopts a large flow rate internal return diaphram pump, which is powerful and super cost-effective. And its maximum flow rate can reach 118oz/min (=3500ml/min), error ≤±1%, more suitable for filling amount > 1 Fl Oz(=30ml). * Diaphragm pump filling low volume liquid will have large error. Don't be fooled by exaggerated statement from some vendors..
  • 【Upgraded Components and Warranty】Even though liquid filling machines look and function similarly, the pumps and components inside are completely different. Casing of our bottle filling machine is made of more durable stainless steel. Our liquid filling machines are upgraded thoroughly, not only the material and components, but better assembly process thanks to years of experience. What's more, we provide each customer with ONE-YEAR warranty and lifetime technical support..
  • 【7 Groups of Data Saving and Automatic Working】Cored with an intelligent control board, seven groups of setting can be stored, recall your desired filling settings without worrying changing different volumes. Continuous mode(Automatic mode) and inching mode(manual mode) switchable. And this filler machine ....
Check Stock

Parker 17L42BE Lubricator, Polycarbonate Bowl with Metal Bowl Guard, No Drain, 90 scfm, 3/4\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Transparent sight dome for 360-degree visibility.
Check Stock

Parker L606-08W/M8 Lubricator, Zinc Bowl with Sight Gauge, Manual Drain, 350 scfm, 1\ NPT

  • Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
  • Precision needle valve for adjustment of delivery rate.
  • Metal bowl with sight gauge for checking fluid level.
  • High-flow port for a flow rate up to 350 scfm.
Check Stock