Best Sight Glass Oil Flow Rate Indicator

Parker 17L44BE Lubricator, Metal Bowl with Sight Gauge, Manual Drain, 90 scfm, 3/4\ NPT

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Transparent sight dome for 360-degree visibility.

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Transparent sight dome for 360-degree visibility.

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Metal bowl with sight gauge for checking fluid level.
High-flow port for a flow rate up to 350 scfm.

Removes grease, grime and oil from engine components, oil pans, carburetors and more.
Fully enclosed electric pump recirculates fluid for quick parts washing.
Red powder coat paint finish, heavy-duty steel construction, set on a rolling cart with lockable casters.
On/off switch with indicator light, 20 gallon tank capacity/12 gallon solvent capacity, fire safety lid with fusible-link.
Max pump output: 192 gph flow rate (w/ flexible pipe).
max pump output: 318 gph flow rate (w/o flexible pipe).

✅Key Parameter:Inlet Port: 1/4" Flare,1/4 HP,Flow Rate:3.0 CFM.Rated Voltage:110V/ 60HZ,Ultimate vacuum:5 PA, Oil Capacity: 220ml.
✅High Efficiency: Direct drive motor allowing easy starting, ,built-in high volume cooling fan for thermal protection..
✅Humanization Design:Oil Sight Glass For Monitoring Oil Levels,Low noise,Exhaust Port with Exhaust Cap,multi-layer filter meet all user requirements..
✅Special Improvement:Lightweight cast aluminum construction for maximum durability,precision machined gear,multi-layer filter show better performance..
✅Widely Application: Perfect for maintenance of air conditioners, automobiles and refrigerators, vacuum packaging of food and experimental pumping..

In-light Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal....
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

HEAVY DUTY 1/2" COMBINATION FILTER-REGULATOR-LUBRICATOR. PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER..
COMES EQUIPPED WITH WALL MOUNTING BRACKET AND BACK MOUNT PRESSURE GAUGE..
FILTER: 250 PSI MAX - 5 MICRON FILTER - 5oz METAL BOWL CAPACITY AND VISUAL SIGHT GLASS..
REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 250 PSI MAX..
LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY AND VISIBLE SIGHT GLASS..

FRL Air Lubricators: Extend air tool life and provide a continuous supply of oil..
Durable cast aluminum body to resist corrosion. Rotating flow dial to adjust oil volume. Easy-access oil fill cap..
Metal Bowl w/Sight Glass: Indicates oil level. Bowl Capacity: 4.56 OZ..
1/2" inch national pipe threads on both inlet/outlet. Thumb Latch releases bowl with 1/8 turn..
Max Air Flow: 175 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
In-line Sight Glass with Clamp End, SUS316 body material.
Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.

FRL Air Lubricators: Extend air tool life and provide a continuous supply of oil..
Durable cast aluminum body to resist corrosion. Rotating flow dial to adjust oil volume. Easy-access oil fill cap..
Metal Bowl w/Sight Glass: Indicates oil level. Bowl Capacity: 4.56 OZ..
1" inch national pipe threads on both inlet/outlet. Thumb Latch releases bowl with 1/8 turn..
Max Air Flow: 250 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..

3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN.
11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET.
160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED.
225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI.

1.Voltage: 110V, 60Hz / Oil capacity: 250 ml / Power: 1/4HP.
2.Superior design on oil entering system: Oil and gas separated thoroughly, no oil mist, reduce pollution.
3.Large sight glass with scale: Minimum and maximum scale to avoid damaging vacuum pump and also improve your work efficiency.
4.Oil Anti Flow-Back Design: The gas inlet is specially designed to prevent oil form flowing back, preventing the container and hoses from being polluted.
5.Alloy aluminum casing and high volume cooling fan: Good heat dissipation to keep the pump running efficiently and for a longer life.

...or Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass..
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads..