Categories

Best Signal Generator Software

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

RIGOL DG2102 Function/Arbitrary Waveform Generator,100MHz 2 Channels

  • SiFi (Signal Fidelity) for 100% waveform replication.
  • 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length.
  • Standard 2 full functional independent channels.
  • ±1ppm frequency stability, -125dBc/Hz phase noise, 200ps low jitter.
  • Built-in 7 digits/s counter up to 200MHz.
  • Intuitive arbitrary waveform editing software.
  • Full modulation supported: AM, FM, PM, ASK, FSK, PSK and PWM.
Check Stock

XCFDP 15MHz DDS Signal Generator Counter,High Precision Dual-Channel Function Generator Arbitrary Waveform Frequency Meter 2.4’’ Screen 200MSa/s 15MHz

  • 【EASY TO OPERATE】Convenient operation interface, superior technical indicators and humanized graphic style. Its sine wave frequency output can....
  • 【SIGNAL STABILITY】The signal generator adopts large-scale FPGA integrated circuit and high-speed MCU processor, and the internal circuit adopts....
  • 【FREQUENCY METER FUNCTION】It supports scanning output from low frequency to high frequency or from high frequency to low frequency. The scanning....
  • 【HIGH PRECISION】This signal generator adopts dual-channel DDS signal and TTL electric level output to generate accurate, stable, low-distortion....
  • 【WIDE APPLICATION】The signal generator has excellent amplitude-frequency characteristics, small and beautiful appearance, and intuitive control....
Check Stock

Tracking Source Rf Generator 35-4400mhz Portable Spectrum Analyzer Spectrum Sweep Signal，Handheld Spectrum Analyzer Rf Power Meter W Software USB Convenient for Factory Electronic

  • 【Abrasion Resistance 】The shell of this portable spectrum analyzer is made of high-quality aluminum alloy, which is corrosion-resistant and....
  • 【Professional manufacture 】 Ensures you higher quality products, you can buy it with ease..
  • 【High efficiency】This signal generator has a large input power, which can greatly improve work efficiency..
  • 【Wider scope 】 The high‑accuracy frequency and high acceptance range of the power meter greatly increase the scope of application.The signal....
  • 【Note】If you need the Software of this handheld spectrum analyzers,please be free to contust us .We will reply in 4-6 hours..
Check Stock

(5PCS) ICS91730AMLFT IC CLOCK GENERATOR LOW EMI 8SOIC 91730 ICS91730

  • PLL and divider :The chip of this signal generator has a 25MHz accurate reference voltage source, and has a PLL and frequency divider inside, so it can generate almost any frequency..
  • three independent outputs :The signal generator has three independent outputs, and each output can have a different frequency..
  • 3.3V LDO regulator :This convenient small chip has a 3.3V LDO regulator and can be powered by 3-5VDC..
  • level shift circuit :There is a level conversion circuit on the I2C line. Generally speaking, you can safely use the chip at 3V or 5V..
  • sleep function :The signal generator has a sleep function, which can reduce power consumption and is very economical and environmentally friendly..
Check Stock

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock

Frequency Generator, DROK DC 3.3V-30V 5-30mA 1Hz-150kHz Adjustable Output PWM Pulse Duty Cycle Square Wave Function Signal Generator Module

  • PARAMETER --- working voltage range 3.3V-30V.
  • APPLICATION --- as square wave signal generator for experimental development.
  • as square wave signal generator for motor driver.
  • as adjustable pulse generator for PWM dimming, speed regulating, etc..
  • DISPLAY--- clear LCD displays frequency & duty ratio value..
  • MODE --- 2 modes, normal mode & accurate mode..
  • PWM output, can set frequency & duty cycle separately.
  • duty cycle upper and lower bounds adjustable.
Check Stock

Rigol DP832A (3 Channels) Programmable DC Power Supply

  • 25 MHz, 2 ch, 200MS/s Waveform Generator with deep memory arbitrary waveform capability and SiFi signal fidelity technology.
  • DG1022Z 25 MHz Arbitrary Function Generator with second channel.
  • SiFi (Signal Fidelity) for 100% waveform replication.
  • 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length.
  • Standard 2 full functional independent channels.
Check Stock

Signal Generator, DROK DC 3.3-30V Function Generator 5-30mA LCD Display PWM Pulse Frequency Duty Cycle Rectangular Wave Square Wave Signal Generator

  • PARAMETER ---- operating voltage range DC 3.3v~30v.
  • APPLICATION ---- as square wave signal generator for experimental development.
  • as square wave signal generator for motor driver.
  • as pulse generator, control related circuits (PWM dimming, speed regulating)..
  • SERIAL COMMUNICATION ---- support serial communication, TTL level..
  • DATA AUTO STORAGE ---- all parameters will be saved automatically after setting and therefore won't lose when power off..
  • OTHER FEATURES ---- with LCD display to display frequency and duty cycle value.
  • PWM output, can set frequency and duty cycle separately by buttons.
  • frequency value is divided into 4 range and switched automatically, with high precision..
Check Stock

UNI-T UTG932 + UTP1306, Function Generator and Switching DC Power Supply Kit

  • Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
  • 60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
  • Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
  • Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
  • UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.
Check Stock

NE555 Duty Cycle Frequency Adjustable Square Wave Signal Generator Board Module by Envistia Mall

  • NE555 square wave pulse generator module can be used to produce square wave signals.
  • Use as a square wave signal generator for experimental development.
  • Generate a square wave signal to drive a stepper motor.
  • Generate adjustable pulses for microcontrollers (MCU).
  • Variable frequency & duty cycle from 1Hz to 200KHz with amplitudes from 4.2V to 11.4V peak-to-peak.
Check Stock

UNI-T UTD2102CEX+ High-Precision 100MHz Desktop Digital Storage Oscilloscope for Laboratory and Electronic Repair Waveform Tester

  • UNI-T Function Arbitrary Waveform Generator UTG962. Dual channels. Ch1 - Ch2 combining. Output waveform: Sine, square, pulse, ramp, noise, DC, arbitrary. Modulation types: AM, FM, PM, FSK, Line, Log. 24 groups non-volatile arbitrary waveform storage..
  • Sampling rate of 200MSa/S. TTL level signal compatible 6 digits high accuracy built-in frequency counter. Frequency counter with output range: 1μHz-60MHz. Full-band resolution of 1μHz. DDS (direct digital synthesis) method applied. 14 bits vertical resolution. Support frequency scanning and output..
  • One of the best ready-to-use function generators. Value pack includes: UTG962 function generator, power adapter (USA standard), USB cable power cord, BNC cable, BNC cable with alligator clips, paper manual, eManual, and 24/7 free support by UNI-T Direct..
  • Budget friendly and intuitive generator for hobbyists, novices, students, small labs, basic projects, ham radio alignment, pro audio measurements. Learn and update skills, work with audio gear, DC offsets, wow & flutter test, amplitudes, receiver test, circuit test, filter troubleshooting, refurbish turntable..
  • As a global brand, UNI-T supply all kinds of testing meters and instruments i.e. oscilloscope, electromagnetic pulse generator, rife machine, tone gen....
Check Stock

WonVon DDS Function Generator, 60MHz Dual-Channel Signal Generator 0.01-100MHz Arbitrary Waveform Pulse FY6900-60M Generator Function Signal Generator

  • FY6900 series Dual-channel Function / Arbitrary waveform generator is a set of Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog / Digital modulator, VCO, Sweep, Counters and Frequency Meter and other functions in a high Performance, cost-effective, multi-function signal generator. Abundant shortcut keys and graphical user interface simplifies every operation..
  • The standard 3-pin power plug increases the grounding protection and effectively eliminates the leakage current on the BNC terminal.2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and graphics of the two channels at the same time.The instrument uses 14-bit high-speed D/A converter chip (5Vpp output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
  • Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~10V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc..
  • Enable to store 64 arbitrary waveform data files, each one of waveform storage depth 8192 points * 14bit....
Check Stock