Categories

Best Signal Power Supplies

Direct-tv Genie 2 Power Supply for Hs17 EPS-17R0

  • Replacement power supply for DIRECTV HS17 receivers (Genie 2).
  • Replaces all EPS17 power supplies such as EPS17RX-XX, EPS17R0-36 and EPS17R0-15.
  • This device is more than just a power supply. What it does is built into its name – it inserts power into a satellite line that also carries signal. (Yes, a satellite dish needs power in order for it to work.).
  • This particular DIRECTV power inserter allows one cable to feed a satellite dish or multiswitch..
Check Stock

HiBoost Cell Phone Signal Booster for Car SUV Van APP fine Tune MAX gain Car Cell Phone Booster for All U.S Carriers-Verizon AT&T T-Mobile Sprint & More FCC Approved

  • 【Powerful Signal Improvement】The signal booster works for increased signal quality and covers car, suv, camping, Pickup trucks. Support 2G, 3G, 4G....
  • 【All Carriers Compatible】Using Hiboost signal booster, every customer can enjoy stronger cell signal from Verizon, AT&T, Sprint, T-Mobile, U.S.....
  • 【Fine Tune MAX Gain】Most car cell phone booster has you pretty much working in the blind, no figures you can see but guess. Hiboost App help fine....
  • 【Multi-power Supplies】The car signal booster for cell phone can be powered by portable charger with Type C. The 20000mAh allows the cell booster....
  • 【Quality Assurance】FCC & IC Certified, FCC certification number: OWWC110505S. 3 years warranty. Can withstand extreme shaking while being....
Check Stock

EAGLEGGO AC Power Adapter Charger for AT&T Cisco DPH154-4U 3G 4G Microcell Signal Booster

  • Brand New, High Quality AC Home/Wall Power Adapter ( Non-OEM, Unbranded, Generic ). This charger connects your device to wall power jack for power supplies. Input: 100v - 240v..
  • Output: 2000mA max. ( Fit current 2000mA and below) With smart IC circuit inside and LED light indicator for preventing overcharging and for short circuit protection. ( Please don't confuse us with the low quality / low current ones in the market. ).
  • Compact design: light in weight-- about 4 ounces. Package includes: 1 unit of AC Power adapter. Compatible with: AT&T / Cisco DPH154 / DPH154-4U-AT 3G/4G LTE Microcell Signal Booster..
Check Stock

Power Probe PP401AMZ01 Red IV with Connector Kit

  • Supplies power and ground for functional component testing.
  • Digital volt and Ohmeter for circuit testing.
  • Large Color LCD screen with easy to Navigate user menu.
  • Ac-rms, AC peak to peak, frequency and pulse width for signal testing.
  • Fuel injector tester for easy circuit diagnosis.
Check Stock

iFi Zen CAN Signature - Balanced Desktop Headphone Amp and Preamp with 4.4mm Outputs

  • ✅ SUPERIOR ENGINEERING - Extremely low distortion and noise from a circuit design inspired by our flagship headphone amp which uses a dedicated....
  • ✅ POWER REALIZED - Maximize the performance of your headphones, more than just getting loud, but realizing the full dynamic range of the drivers and....
  • ✅ IMMERSIVE SOUND - Enhanced with our signature analog signal processing to deliver accurate and more natural bass frequencies through XSpace, and....
  • ✅ THE INS AND OUTS - Features both a balanced 4.4mm pentacon and a single ended 6.3mm (1/4”) headphone output on the front as well as three inputs....
  • ✅ ULTIMATE POWER – Every purchase of the ZEN CAN Signature includes the iPower2 power supply. When it comes to low-noise, few power supplies....
Check Stock

AD8317 1M-10GHz 60dB RF Power Meter Logarithmic RF Signal Power Detector Controller for Amplifier

  • EASY TO USE :The logarithmic power meter adopts AD8317 chip design, which is convenient to use, small in size, high in efficiency, easy to install, stable and reliable, and is used for radio frequency signal power detection..
  • DETECTABLE :The logarithmic power meter has strict quality control and quality assurance. It can detect the power of the radio frequency signal from -55dBm to 0dBm, and convert the radio frequency signal into a DC voltage output..
  • DYNAMIC RANGE :The greater the amplitude or power of the radio frequency signal, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, thereby expanding the dynamic range of the detection signal to 55dB..
  • WIDELY USED :The logarithmic power meter adopts advanced technology and exquisite craftsmanship, and has been improved to improve durability. Logarithmic detector can be widely used in radio frequency signal detection, signal power measurement, and environmental field strength detection..
Check Stock

YWBL-WH Logarithmic Power Detector Meter AD8317 1M-10GHz 60dB RF Power Meter Logarithmic Detector Controller for Amplifier 50 Ohms

  • AD8317 CHIP---The logarithmic power detector is designed by using AD8317 chip, and is used for RF signal power detection.
  • -55dBm to 0dBm---The logarithmic power detector can detect power in -55dBm to 0dBm of an RF signal, so that the RF signal is converted to DC voltage output.
  • APPLICATION AREAS---The logarithmic power detector could be used for RF transmitter PA set point control and level monitoring.
  • Power monitoring in a radio line transmitter.
  • RSSI measurements in base stations, WLAN, WiMAX, and radar.
  • 55dB---The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB.
  • WIDE APPLICATION---The logarithmic power detector could be widely used radio frequency signal detection, signal power measurement, environmental field strength detection, or as a part of automatic gain control and automatic level control.
Check Stock

SIIG Digital & Optical Audio Extender Over Cat5e/6 Ethernet Cable up to 990ft Audio Converter S/PDIF Toslink & Coaxial for Digital 5.1 or PCM 2.0 Audio Metal Housing ESD Protection CE-AU0411-S1

  • ✅ Extends either S/PDIF Toslink or Coaxial audio signal up to 990ft (300m) over Cat5e/6 UTP cable.
  • ✅ Supplies clear digital audio over long distance with no signal loss.
  • ✅ Experience the highest quality audio, compatible with Dolby Digital, DTS 5.1, DTS-HD, 2ch PCM audio formats.
  • ✅ PoC (Power over Cable) technology allows both the transmitter and receiver units to be powered using only one power adapter connected to the transmitter.
  • ✅ Metal housing offers better RF shielding and efficient heat dissipation for dependable performance and long life.
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

  • The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
  • Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..
Check Stock

Ximimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs

  • The A4988/DRV8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt..
  • The position where the jumper hits the ON DP indicates 16 subdivisions (4988) or 32 subdivisions (8825)..
  • Jv connects 5V and 12V-24V power supplies..
  • Jc's ESDG corresponds to the EnableStepDirGnd drive signal output on the connection..
Check Stock

5 Axis Mach3 Stepper Motor Controller Board Breakout Board interface board For CNC Router Engraving Milling Machine

  • ...le and the 25-bit LPT cable cannot exceed 1.5 meters..
  • 1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals..
  • 2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability..
  • 3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B..
  • 4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you need purchase a PCI LPT converte Card..
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock