Categories

Best Signal Transducer

Garmin Airmar DST810 Smart Transducer

  • This plastic thru-hull NMEA 2000 smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data..
  • It can read depths to 330’ and offers fast 5 Hz water speed signal output for smoother visualization on compatible chartplotters or other displays..
  • Wireless BLUETOOTH connectivity makes it easy to manage calibration of sensor data through the AIRMAR Cast app interface..
Check Stock

General Technologies Corp GTC TA300 Smartach D Digital Diesel Engine Tachometer

  • For 1 to 12 cylinders and 2 or 4 cycle engines.
  • Measures from 200 to 20000 RPM on a 4-1/2 digits LCD display.
  • Advanced microcontroller technology yields 0.1 percent accuracy.
  • User adjustable signal threshold level from 20 percent to 80 percent.
  • Universal transducer clamp  attaches quickly to fuel injection lines.
Check Stock

Digital Manometer, Portable Handheld Air Vacuum/Gas Pressure Gauge Meter 11 Units with Backlight, ±13.78kPa ±2PSI, Suitable for Differential Pressure of 1-2 Pipes, Ventilation HVAC

  • The MPXV7002 is designed to measure positive and negative pressure..
  • The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications..
  • And particularly those employing a microcontroller or microprocessor with A/D inputs..
  • This patented, single element transducer combines advanced micromachining techniques, thin-film metallization and bipolar processing which provide an accurate, high level analog output signal that is proportional to the applied pressure..
  • In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information)..
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
  • ◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
  • ◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....
Check Stock

Vibration Meter AR63B Handheld Precision Digital Intelligent Sensor Vibration Meter, Auto Switch Range

  • FUNCTIONS---Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery, specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep..
  • ACCURATE MEASUREMENT---The vibrometer use the high-performance acceleration meter, realize the repetitiveness and accurate measurement.It has the function of testing axle bearing situation..
  • WORKING PRINCIPLE---Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration..
  • WIDE APPLICATION---Widely used in the lines of Power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
  • FEATURES---Multi-functional, with temperature measurement, auto switch range, backlight, auto power off..
Check Stock

Boat Zone BLACK0101 Transducer Spray Shield

  • Boat Zone’s Transducer Spray Shields virtually eliminate pesky transducer spray from your boat’s transom!.
  • Durable marine-grade plastic construction.
  • Three channels for transducer cable routing help provide a professional-looking installation.
  • Fits any 3. 5” x 12” transducer board (transducer board required for installation - not included).
Check Stock

Presonus Temblor T10 Powered Studio Subwoofer, Multicolor

  • 10-Inch glass-composite low-frequency transducer.
  • power: 100-120V 50/60 Hz or 220-240V 50/60 Hz.
  • Input gain control (-30 dB to +6 dB, continuously variable) and continuously variable low Pass filter (50 Hz to 140 Hz).
  • Switchable high pass filter removes frequency content below 80 Hz from the full-range signal sent to the main monitors.
  • Momentary footswitch (included) Bypasses the subwoofer, high pass filter, and sub out.
  • Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs.
Check Stock

WIFI Fish Finder 2.0

  • This WIFI Fish Finder is especially designed for amateur and professional fishermen alike,to find out the location of fish,depth and bottom contour of water.This WIFI fish finder can be used in ocean,river or lake and is fantastic for detecting schools of fish in any fresh water or salt water.This WIFI Fish Finder is based on Sonar technology,The WIFI transducer sends a sound wave signal ,the returned “echoes” are transmitted with WIFI technology to the IPHONE ,IPAD or other intelligent device ,then all the underwater information is displayed on the screen,including the water depth,water temperature,bottom contour,fish location and depth..
Check Stock

Logitech for Creators Blue Ella Planar Magnetic Headphones with Built-in Audiophile Amp (7013)

  • Over-ear design for comfort during long work sessions.
  • Semi-open technology for solid bass and airy highs.
  • Patented Varimotion 30 mm XXL transducer for accurate signal transfer and great dynamic range.
  • The choice of professionals around the worldstage and studio standard for more than two decades.
Check Stock

AS63D Vibrometer Pen Pocket Pen Vibration Meter Digital Vibration Meter Portable Mechanical Motor Vibration Tester for Mechanical Fault

  • Widely Applications: This Vibration Meter Tester is a good tool for measuring vibration. It is widely used in power, petrochemical, machinery manufacturing, metallurgy, vehicles and more..
  • High Sensitive Offers High Accuracy: High sensitivity probe for accurate measurement, provides long and short probe head, each one is suitable for different situation measurement..
  • LCD Backlight Offers Clear Reading: This Vibration Meter is equipped with LCD backlight, which can show the measuring values intuitively and clearly. It supports different vibration frequency selection, convenient to operate..
  • Usage: This Vibration Meter Gauge (also called vibration severity) adopts Piezoelectric Acceleration Transducer to transfer the vibration signal into electrical signal, analyze the input signals, and show the acceleration, speed, Displacement..
  • Pen-type tester: pen-type tester can be carried in your pocket.Simple to use, the structure is compact, portable..
Check Stock

Humminbird 411390-1 MEGA 360 Imaging Universal Fish Finder Transducer

  • Every detail, in every direction, now for every boat.
  • Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns.
  • Pick from two operation modes for this transducer.
  • MEGA 360 Imaging or Side Imaging. This allows you to view a MEGA 360 Imaging view or use this transducer as a MEGA Side Imaging sonar source by selecting the Side Imaging operation mode.
  • Mark waypoints directly on your MEGA 360 Imaging screen and watch them update as your boat position changes, making it easy to find and then cast to fish and structure.
  • What's Included: MEGA 360 Imaging transducer with attached power cable and transducer cable, 10' SOLIX transducer extension cable, 10' HELIX transducer adapter cable, 10' MEGA 360 power cable and adjustable, aluminum MEGA 360 Imaging mounting bracket with depth retaining ring for shaft.
Check Stock

Vibration Meter AR63B Handheld Vibration Sensor Meter High Precision Vibration Meter Tester Gauge, Vibrometer Analyzer

  • HIGH EFFICIENCY: The digital vibration meter uses the high-performance acceleration meter, realize the repetitiveness and accurate measurement. It has the function of testing axle bearing situation.
  • EASY TO USE: Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.
  • MULTI-FUNCTIONAL: The vibration analyzer tester is multi-functional, which includes temperature measurement, auto switch range, back-light, auto power off.
  • IDEAL TOOL: This vibration meter can be used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Which is specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
  • WIDELY APPLICATIONS: The vibration tester is widely used in the lines of power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
Check Stock