Categories

Best Signal Voltage Regulators

Step Down/Up Transformer 220v to 110v, 3000W Voltage Converter 110 to 220 120v to 240V Heavy Duty Power Transformer

  • 【3000W Step Up Transformer 110v to 220v】: Step Up voltage converter from 100V-120V to 220V-240V .The ZHENGXI brand has 8 years of experience in the development and production of transformers, voltage regulators and regulators, with products sold to countries around the world and widely recognized . Passed CE & CQC certification.
  • 【Step Down Transformer 220v to 110v】:Two 220V Multifunction Output sockets and two 110V output sockers for appliances Fromr EURO,UK, China, Korea, HK, Philippine, US,etc.For safety reasons, it is recommended that appliances not exceeding 2400W be used to prevent damage to the transformer and the appliances used.
  • 【Upgraded 110 to 220 Voltage Converter】：Unlike those large, bulky (stinky) converters, this newly designed 110V/220V to 220V/110V converter doesn't produce noise/smell/heat, it's quieter, more efficient,and equipped with voltage display can more clearly see the output voltage.
  • 【120v to 240v step up transformer】:As we all know, in most cases the power consumed by the appliance at the moment of power on is the largest, so when choosing a transformer, please refe....
Check Stock

(20PCS) 2EZ15D5 DIODE ZENER 15V 2W DO-41 2EZ15 2EZ15D

  • 2V to 39V .0.5 Watt Zener Diodes Assortment Set (Pack of 30 Values, Each 10 Pieces, Total 300 Pieces).
  • The assortments contain the following voltage: 2V 2.2V 2.4V 2.7V 3V 3.3V 3.6V 3.9V 4.3V 4.7V 5.1V 5.6V 6.2V 6.8V 7.5V 8.2V 9.1V 10V 11V 12V 13V 15V 16V 18V 20V 22V 24V 27V 30V 39V.
  • These diodes are widely used as voltage references and as shunt regulators to regulate the voltage across small circuits..
Check Stock

PISCSID 74505-06 HARLEY Voltage Regulator Rectifier Fit For Harley Davidson Electra Glide Classic 2006-2008,ROAD KING CLASSIC 2006-2008,2006-2008 FLT FLH Street,498269,498276

  • COMPATIBLE MODELS: Voltage Regulator Rectifier Fit for 2006 2007 2008 Glide 2006 2007 2008 Road Glide 2006 2007 2008 Road King 2006 2007 2008 Street Glide.
  • OEM NUMBER: Replaces HARLEY-DAVIDSION voltage regulator part numbers:H 74505-06 74505-06A 498269 49-8269 498276 49-8276. Please check OEM number before buying..
  • HIGHT QUALITY: Voltage regulator rectifier ueses original stabilivolt and advanced heat conduction system to control the output. Voltage stabilize at 12V to Protech Battery System, Lights,Reduce Load, and Extending Mortorcycle Service Life.ALL Regulators have been Tested Strictly to make sure every regulator have original HARLEY regulator Performance..
  • GOOD MATERIAL:Voltage rectifier regulator use high quality aluminum Shell , highest grade and thick aluminum substrate , high-performance electronic components..
  • SATISFAY AFTERSELL SERVICE:All Voltage Regulator Rectifier will Test Before Shipping. If you have Any Dissatisfaction with Our Product, Please let us Know and we will.
Check Stock

4-20mA Generator, DROK Adjustable Signal Generator, DC 0-10V 0 4-20mA Current Voltage Analog Simulator for Value Adjusting PLC Panel LED Testing

  • AMP & VOLT DUAL SIGNAL GENERATOR: Multifunctional DROK signal generator kit is able to generate ampere & voltage by one module, which generate 0/4 – 20mA current signal and 0-10V voltage signal just by rotating a multi-cycle precise potentiometer, simple and handy..
  • CLEAR LED DISPLAY: Our 4-20ma signal generator has bright and clear 3-digit LED digital display screen, which can be used to monitor the output current and voltage. You just need to push the switch below the monitor easy to switch the display..
  • AMP & VOLT DISPLAY CALIBRATION: There are current and voltage display calibrating potentiometer on the back of the module. If the display is accurate, you can calibrate the display value of current voltage by yourself..
  • WIDE APPLICATION: Our signal adapter can be used as signal generator, valve adjustment, inverter control, PLC debugging, panel debugging, LED testing, simulating the output of transmitter..
Check Stock

Ximimark 2Pcs Current to Voltage Converter Module 0/4-20mA to 0-3.3V 0-5V 0-10V Voltage Transmitter Signal Conversion Conditioning Board

  • During the transmission of the circuit signal, the voltage signal will become weaker as the transmission distance increases. The current transmission....
  • This module is used for the end of the current signal transmission, and converts the signal into a voltage signal for detection by the single chip....
  • Wide supply voltage range, output voltage support multiple ranges, zero and full scale can be adjusted..
  • The current signal sampling resistor adopts high-precision color ring resistance, high precision, small temperature drift and high power..
  • High stability, good linearity, industrial grade..
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

1-600MHz RF Signal Power Meter Logarithmic Detector -74dBm to 18dBm Radio Frequency Detection

  • The detector is is used for RF signal power detection of frequency range between 1MHZ and 600MHZ.
  • It can detect a rf signal of power from -74dBm to 18dBm, and convert the RF signal into a DC voltage output.
  • The higher radio frequency signal range or power is, the higher output voltage will be.
  • output voltage is proportional to logarithm of input signal range.
  • Widely used for RF signal detection, signal power measurement, environment field strength detection, can also be used as a part of automatic gain control and automatic level control.
  • It can be made into 1mw ~ 1kw RF power meter after appropriate transformation.
Check Stock

ACCEL 201107C Chrome Electro Mechanical Voltage Regulator, Black, One Size

  • American made Bosch type voltage regulators.
  • Fits 1965 to 1978 Harley Davidson XLCHs and 1965 to 1966 XLH900s.
  • Heavy duty shock mounted bases with vibration resistant internal connections.
Check Stock

ACCEL 201106C Chrome Electro Mechanical Voltage Regulator

  • American made Delco type voltage regulators.
  • Heavy duty shock mounted bases with vibration resistant internal connections.
Check Stock

HEAVY DUTY TORCH & CUT ATTAC

  • SET OF 2 REGULATORS - OXYGEN 249-499B and PROPANE 249-500B.
  • A Set of Pre-Set Regulators, one for the Oxygen Tank and the other for Fuel made by Smith Equipment, Regulators are designed to use with disposable tanks. Ideal for the Smith Little Torch, when using them in Hobby and Craft also for Jewelry Repair and soldering work..
Check Stock

Bindpo RF Logarithmic Detector, 1M-10000MHz AD8317 Radio Frequency Logarithmic Detector Power Meter, for RF Signal Power Detection/Radio Frequency Signal Detection

  • The product is designed by using AD8317 chip, and is used for RF signal power detection..
  • Can detect power in -55dBm to -0dBm of an RF signal, so that the RF signal is converted to DC voltage output..
  • The greater the amplitude or power of the RF signal, the higher the output voltage, and the output voltage is directly proportional to the logarithm of the input signal amplitude, thus expanding the dynamic range of the detected signal, which ranges reach 55dB..
  • It can be widely used in radio frequency signal detection, signal power measurement, environmental field strength detection..
  • It can also be used as part of automatic gain control and automatic level control..
Check Stock

SCITOO 6D3-81960-00-00 68V-81960-00881346T Voltage Regulator Rectifier 2003-2003 for Yamaha FX140 2003-2004 for Yamaha FX140 Cruiser

  • Fits 8-25 HP Engines with 15 Amp alternators.
  • Replaces Kohler Part Numbers 25 403 03 / 25 403 03-S / 25 755 03 / 25 755 03-S / 41 403 01 / 41 403 03 / 41 403 04 / 41 403 03-S /41 403 05 / 41 403 06 / 41 403 06-S / 41 403 08 / 41 403 08-S / 41 403 09 / 41 403 09-S / 41 403 10 / 41 403 10-S.
  • Easy installation and high quality.Package includes:1 x voltage regulator rectifier.
Check Stock

PWM Signal Converter Module Digital to Analog Voltage Converter Adapter White

  • PWM voltage converter Convert 0-100% PWM digital signal into analog signal..
  • Signal interface switching between single chip or other industrial control board..
  • The power supply has the function of reverse connect protection, safe to use ..
  • Input digital signal can be 24V level 0-100%PWM signal. Output analog signal can be 0-10V voltage..
  • PWM signal receiving frequency range: 100hz-3khz, recommended 1khz-3khz..
Check Stock