Categories

Best Silicon Carbon Brick

uxcell 12x60mm Plastic Expansion Tube for Drywall with Hex Screws Gray 4pcs

  • Carbon Steel Screw Size: 8 x 64mm / 0.31" x 2.52"(Thread Dia*Total Length).
  • Package Content: 4pcs(+/-2%) x Plastic Expansion Tubes.
  • Material - Made of plastic, injection , flexible, good toughness, impact resistance, not easy to break, high expansion coefficient..
  • Design - Good elasticity and high tension. The protruding edge can prevent the expansion screw from entering the deep part of the hole due to over-deep making..
  • Advantage - Good anchoring force, large anchorage range, can be used to fix brackets, handrails, shelves, frames, cabinets, mirror frames, coat and hat frames, skirting boards, curtain guide rail, and home decoration etc..
  • Application - Can be commonly applied to solid brick, concrete, aerated concrete, high-hole brick, gypsum board, sand brick and other wall materials..
Check Stock

Kitchens Grill Brick Holder and Two Grill Bricks - Cleans Griddles and Grills

  • Preferred way to clean professional griddles and grills! Two fiberglass bricks and one sturdy aluminum handle included..
  • Allows one to quickly clean grease and residue from your flat-top without damaging the surface..
  • Each brick measures 8" x 4" x 3.5". The handle tightens nicely around the brick to keep hands clean and safe from griddle..
  • These grill blocks are used constantly in restaurants and food trucks..
  • Cleans carbon quickly and effortlessly, leaving your griddle looking new again!.
Check Stock

440C Stainless Steel Barstock for Knife Making - 1/4 x 2 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

440C Stainless Steel Barstock for Knife Making - 3/16 x 1-1/2 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/2 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/4 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

Forney 42326 Copper Coated Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

  • High strength alloy used for gas brazing low carbon and low alloy steels.
  • Used in applications require high tensile strength, greater than 45,000 psi.
  • High silicon and manganese content eliminates the need for flux.
  • Typical applications include low carbon and low alloy steels and sheets.
Check Stock

Schwinn Fastback Carbon Road Bike, Fastback Carbon 105, 51cm/Medium Frame

  • Designed for advanced to expert riders who want to go farther and faster on a bike built for superior performance. Suggested rider height range: 5 feet 7 inches - 5 feet 10 inches.
  • Schwinn road-tuned N LITENED Black Label Carbon frame and Schwinn race carbon fork with carbon tapered steerer.
  • Full Shimano 105 22-speed drivetrain with Shimano 105 50/34T compact crank, Shimano 105 STI shifters, and Shimano 11-32T cassette.
  • Shimano WH-RS100 aluminum road wheels, with Kenda 700 x 25c tires..
  • Shimano 105 dual-pivot caliper brakes. Schwinn S1 race saddle, stem, and handlebar with silicon gel bar tape.
Check Stock

Schwinn Fastback Carbon Road Bike Fastback Carbon 105 48cm/Small Frame Matte Black

  • Designed for advanced to expert riders who want to go farther and faster on a bike built for superior performance. Suggested rider height range: 5....
  • Schwinn road-tuned N LITENED Black Label Carbon frame and Schwinn race carbon fork with carbon tapered steerer.
  • Full Shimano 105 22-speed drivetrain with Shimano 105 50/34T compact crank, Shimano 105 STI shifters, and Shimano 11-32T cassette.
  • Shimano WH-RS100 aluminum road wheels, with Kenda 700 x 25c tires.
  • Shimano 105 dual-pivot caliper brakes. Schwinn S1 race saddle, stem, and handlebar with silicon gel bar tape.
Check Stock

Texas Knifemakers Supply - 5160 High Carbon Forging Steel for Knife Making - 1/4' x 1-3/4' x 11-1/2'

  • 5160 is a very durable and tough alloy forging steel often used in making swords..
  • In addition to its iron, this steel contains 0.64% carbon, 0.9% chromium, 1% manganese, 0.35% silicon, with trace amounts of sulphur and phosphorus..
  • The addition of chromium and silicon make this steel excellent at holding an edge and able to handle a lot of use..
  • This is typically an oil quenched steel..
Check Stock

1\ X 1\ Stainless Steel Square Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 1.0 inch Thick

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

Estwing 1-3/4-Inch Wide Masonry Chisel with Protective Hand Grip Guard (42521)

  • MULTI-USE - Designed to score and shape hardened materials like stone, concrete and brick.
  • 1-3/4-INCH TIP - 1-3/4-inch wide cutting edge for precision use without damaging surrounding material.
  • CARBON STEEL - Drop forged from EN9 high carbon steel for lasting strength and durability.
  • GRIP GUARD - Large grip guard provides a comfortable handle on chisel and protection against missed strikes.
  • HARDENED EDGE - Hardened edge for cleaner, faster scoring with fewer blows and less deformation.
Check Stock

1/4\ X 1\ Stainless Steel Flat Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 0.25 inch Thick

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock