Best Silicon manganese Alloy
440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/2 x 12
- Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
- High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
- High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/4 x 12
- Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
- High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
- High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock1\ X 1\ Stainless Steel Square Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 1.0 inch Thick
- Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
- High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
- High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock1/4\ X 1\ Stainless Steel Flat Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 0.25 inch Thick
- Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
- High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
- High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check StockManganese Flake (1 Pound | 99.8+% Pure) Raw Manganese Metal by MS MetalShipper
- ✔️ Manganese Flake (1 Pound | 99.8+% Pure) Our high purity manganese flake is mined in South Africa and is sold by the pound. This manganese flake is as pure as you can find anywhere at 99.86% pure manganese. This manganese is also Selenium free, unlike the Chinese manganese you might find elsewhere. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per pound..
- ✔️ USAGE - This is high purity manganese that can be confidently used in any application where manganese is required. This item is one of our best sellers because of its versatility and ease of use..
- ✔️ SIZE - Each piece of manganese flake varies in exact size and shape. On average each piece of flake is approximately .50 to 1.00 inch in length and flat in shape..
- ✔️ SPECIFICATIONS - Atomic Number = 25 | Melting Point (F) = 2275 | Atomic Mass= 118.71 | Boiling Point (F) = 3742 | Density (g/cm3) = 7.4 | Analysis: Manganese (Mn) 99.8600%, Sulfur (S) 0.0450%, Iron (Fe) 0.0370%, Selenium (Se) 0.0200%, Carbon (C) 0.0080%, Silicon (Si) 0.0054%, Phosphorous (P) 0.0006%..
- ✔️ PACKAGING - This 1lb of manganese flake will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..
Check Stock1 Pack 12″x2″x0.25″ 5160 Steel Flat Stock Bar Blade Billets Blanks Knife Making Forging, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making
- 5160 is a very durable and tough alloy forging steel often used in making swords..
- In addition to its iron, this steel contains 0.64% carbon, 0.9% chromium, 1% manganese, 0.35% silicon, with trace amounts of sulphur and phosphorus..
- The addition of chromium and silicon make this steel excellent at holding an edge and able to handle a lot of use..
- This is typically an oil quenched steel..
- .25″ Thickness x 2″ Width x 1 Ft. Length.
Check StockNarex 8 Piece Micro Mini Professional Detail Carving Chisels Set with 2 knives, 4 gouges, V Tool and straight chisel 869010
- This professional 8 piece micro detail carving set is manufactured by tool maker in Czech Republic.
- The set contains 2 knives, 4 gouges (2 half round, one shallow and on standard), straight and V ool.
- Knife blades Manganese-Vanadium HRc 60-62.
- Carving tools are chrome-silicon alloy steel 59HRc..
- Handles are stained and waxed European beech wood..
Check StockAluminum Welding Rods 100 Pack Aluminum Weld Bars 1.6mmx33cm Aluminum Welding Wire for Electric Power Chemistry
- HIGH QUALITY MATERIAL-- This low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum. The aluminum welding....
- PERFECT WELDING EFFECT -- Designed with full & smooth welding effect, great weldability and corrosion resistance, high thermal conductivity, high....
- APPLICATION -- The aluminum welding rods is used for propane torch welding and filling material for pure aluminum, connection with aluminum bus and....
- WIDELY USE -- The aluminum welding wire is widely used for pure aluminum, aluminum manganese, aluminum silicon magnesium alloy, and automotive....
- WARRANTY -- guangfan provide this product 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in....
Check StockSnow Tire Chains, 6 Pack Universal Car Emergency Anti Slip Snow Chains, Winter Security Tire Chains Tire Width 195-225mm(7.6-8.9 inch) for Most Cars/SUV/Trucks (Medium)
- Heavy duty Material: The snow chains are made of alloy manganese steel, which are welded together with 100-150KH High Frequency Current. Manganese alloy cross members provide superior, all-around traction performance and greater durability compared to conventional traction products, and not easy to rust..
- Safe and Durable: The snow chains grid structure links the three chains together to increase the strength and anti-skid ability, especially to prevent side slip. The diamond-shaped cross chain provides smoother riding, better compatibility with anti-lock brakes, traction control, all-wheel drive (AWD) and other electronically monitored control systems..
- Tire Chains Attention: 1, No sudden braking, sharp turns. 2, After installing the chains and driving for hundreds of meters, please tighten the chains again. 3, The driving speed should be less than 35 km / h. 4, When there is no snow or mud on the hard road and the anti-skid chains is not required, please take them off in time. 5, Installation is forbidden at the position of the inflation hole..
- Heavy duty Material: The snow chains are made of alloy manganese steel, which ....
Check StockManual Chain Lift,4400LBS Capacity, 10FT, Lifting Manual Chain Block Hoist ,Heavy-Duty Hooks, Industrial Grade Steel Structures, garages, Warehouses, Automotive Machinery
- Alloy thickened shell: compact crimping thickened, anti-drop shell, good collision ability, protect internal parts,.
- G20 manganese alloy chain: high-quality alloy chain, not easy to break, not easy to rust, bearing capacity of 2200, link length 10FT, stable load-bearing, durable.
- Thick manganese alloy hook: 360° free rotation, easier hoisting, with safety buckle, items are not easy to fall during work.
- Alloy thickened shell: compact crimping thickened, anti-drop shell, good collision ability, protect internal parts..
- Application: This manual lifting steel chain block crane is widely used for personal manual lifting, and the mechanical load braking system allows precise operation, construction sites, garages, warehouses, shipbuilding docks/terminals, automotive facilities, workshops, etc..
Check StockManual Chain Lift,2200LBS Capacity, 10FT, Lifting Manual Chain Block Hoist ,Heavy-Duty Hooks, Industrial Grade Steel Structures, garages, Warehouses, Automotive Machinery
- Alloy thickened shell: compact crimping thickened, anti-drop shell, good collision ability, protect internal parts,.
- G20 manganese alloy chain: high-quality alloy chain, not easy to break, not easy to rust, bearing capacity of 4400, link length 10FT, stable load-bearing, durable.
- Thick manganese alloy hook: 360° free rotation, easier hoisting, with safety buckle, items are not easy to fall during work.
- Alloy thickened shell: compact crimping thickened, anti-drop shell, good collision ability, protect internal parts..
- Application: This manual lifting steel chain block crane is widely used for personal manual lifting, and the mechanical load braking system allows precise operation, construction sites, garages, warehouses, shipbuilding docks/terminals, automotive facilities, workshops, etc..
Check StockTRUEKATANA Black Samurai Theme Handmade Carbon Steel Ninjato Ninja Swords Straight Katana
- Key features: chokuto, ninjato, black tsuba, manganese steel, black saya, full tang, handmade, blade polished, sharpened, battle ready, alloy fittings.
- Fully handmade sword, highly polished blade, impressively sized yet easy to wield and deft in battle.
- Following the traditional japanese process, extremely sharp hand honed edge..
- Black lacquered hard wood saya, premium alloy fittings.
- Overall length: 103cm, handle length (tsuka): 72cm, blade length (nagasa): 26cm, blade material: high manganese steel, blade sharp: sharpened, blade width: 1.2 inches.
Check StockRayley Electrical Cutting Plier Wire Cable Cutter Side Snips Flush Pliers Tool 170 Flush Cutter Internal Spring Cutting Pliers Small Wire Cutters Running pliers
- It easily permeates through nearly any material with the swift and effortless gripping motion of the hand. The jaws are constructed of a high strength steel alloy. It's a very hot wire cutter..
- In addition to strength, the manganese steel alloy provides for resistance to rust and corrosion. Constructed of high strength, Rockwell harness 65 rated, manganese steel alloy. Also you can use this wire cutters for jewelry.
- Handle material: Plastic rubber, so you can handle this side snips flush pliers very comfortably..
- Cutting diameter: 5mm. It is a micro cutter..
- Easily permeates through nearly any material. small but Sharp flush cutters..
Check Stock