Categories

Best Simultaneous Current Monitoring

Digilent Pmod ISNS20: 20A Current Sensor

  • 【FUNCTION】Adjustable DC current induction switch is a switch output detection, monitoring and protection product developed by using advanced non-sourced power supply (only for alternating current) technology.
  • 【IDEAL CHOICE】Compared with the traditional transformer and thermal protector, the current induction switch has the advantages of high accuracy, stable performance and long service life, it is an ideal choice for automatic industrial control equipment and power monitoring.
  • 【APPLICATION】Widely used in substations, variable frequency speed regulation devices, frequency converter devices, electrolytic plating, electric locomotives, street lamp monitoring, coal mines and other automation industries that require current monitoring.
  • 【PRINCIPLE】The current induction switch uses the principle of electromagnetic mutual inductance of current for safety, introduction, and convenience to monitor or detect the current of electrical equipment.
  • 【TWO TYPES】The switch type is normally open and normally closed, you can choose the appropriate product according to your needs, the startup time is less than 0.1 seconds. The shell material is fireproof ABS, which is safer to use.
Check Stock

AC Current Sensing Switch Flameproof Adjustable 0.2~30A IP30 Self-Powered Sensing Switch(Normally Closed)

  • Control of various automatic industrial control equipment, flash, buzzer, relay, single chip, or other power load equipment..
  • Using the electromagnetic mutual inductance principle of current, the advanced switch output detection, monitoring and protection alarm type products without power supply technology are adopted..
  • Widely used in substation, frequency control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other need current monitoring automation industry..
  • Compared with traditional transformer and thermal protector, it has the advantages of high accuracy, stable performance and long service life..
  • The current-sensing switch is for safe, convenient monitoring or detecting the current of electric equipment. An ideal choice for automatic industrial control equipment and electric power monitoring..
Check Stock

AC 0.5-50A Current Sensing Switch,SZC25-NC-AL-CH Current Relay Monitoring,Adjustable Normally Close Current Switch,

  • High precision, more stable and long service life.
  • It is an ideal choice for automated industrial equipment and store monitoring..
  • This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to di.
  • Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries requiring current monitoring.
Check Stock

Eboxer Miniature Current Switch, 0.2 to 30A Flameproof Adjustable AC Current Sensing Switch, with Users Manual, Self Powered Sensing Switch for Automated Industrial Equipment(Normally Closed)

  • HIGH QUALITY SENSING SWITCH: Control various automation industrial equipment, flashlights, buzzers, relays, microcontrollers, or other electrical load devices..
  • HIGH PERFORMANCE: Compared with traditional device, thermal protectors and other devices, it has the advantages of high accuracy, stable performance and long service life..
  • SAFETY AND SIMPLE: The current sense switch is for safety, simple, and convenient monitoring or detection of current in the electrical equipment..
  • ADVANCED TECHNOLOGY: Using the principle of electromagnetic mutual inductance of current, the advanced output detection, monitoring and protection alarm products developed by the non power supply technology are adopted..
  • WIDE SUITABLE: An ideal choice for automated industrial equipment and power monitoring, widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive, street lamp monitoring, coal mine and other automation industries that need current monitoring..
Check Stock

Current Switch, Self-Powered Current Sensing Switch SZC25-NO-AL-CH AC 0.5-50A Adjustable Normally Open Current Sensing Relay for Flash Buzzer Transformer Substation

  • 【HIGH PRECISION & STABLE PERFORMANCE】The product features high quality, high precision, stable performance and long service life. It has the advantages of high precision, more stable heart, and long service life. It is an ideal choice for automated industrial equipment and store monitoring..
  • 【WORKING PRINCIPLES】This AC current sensing switch is designed and manufactured to solve the AC current monitoring. It uses the principle of mutual inductance to sense the AC current through the AC, isolate the AC current, and output a normally closed switching signal to directly control various automated chemical equipment..
  • 【FAST RESPONSE & LED INDICATOR】The switch has no new limit, and the reaction speed reaches ms. The LED state indicator provides a convenient and intuitive representation of the operating status of the switch. Through-heart structure design, isolation withstand voltage up to 2000V..
  • 【SELF-POWERED SENSING SWITCH】Self-powered, no external power supply required, high-power MOS tube non-contact electronic switch. The operating current of 0.5-50A AC can be adjusted by the potentiometer..
  • 【WIDE APPLICATION】Widely used in substation, frequency conversion speed control device, inverter device, electrolytic plating, electric locomotive....
Check Stock

Siemens 3UG4622-1AW30 Monitoring Relay Single Phase Current Monitoring 22.5mm Width Screw Terminal 1 CO Contacts 0.05A AC/DC Measuring Range 0.01A-5A Hysteresis 0-20 s Starting Bypass Time 0-20 s Off Delay 24-240VAC/DC Auxiliary Voltage

  • Can be digitally set and with LCD display.
  • Simultaneous monitoring for current over range/under range over the complete measuring range.
  • Wide-voltage versions reduce stock inventory costs.
Check Stock

AC Current Transmitter Walfront AC Current Transducer Overload Protector Input AC 0-200A Output DC 0-10V SZT20-CH-10V No Power Required

  • ☛ CURRENT MONITORING -- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • ☛ MEASURE CURRENT RANGE -- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • ☛ STRAIGHT-THROUGH DESIGN -- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • ☛ ABS OUTER CASTING -- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
  • ☛ WIDE APPLICATION -- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

  • CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
  • ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
Check Stock

Fluke 715 Volt/mA Loop Calibrator

  • Measure Loop Current (0-20 Ma, 4-20 Ma) Signals With Very High Accuracy Of 0. 015% And 1 Ma Resolution.
  • Measure Voltage Output Process Signals From Places, Transmitters.
  • 24V Loop Supply With Simultaneous Current Measurement.
  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution.
  • Compatible with toolpack magnetic hanging system.
Check Stock

ECHZOVE Car Charger for Nintendo Switch,Steam Deck,Switch lite Car Charger USB Type-C- Black

  • ...charge and quick charge of PD2.0 protocol,rated current of output:5V/2.4A, 9V/2A, 12V/1.5A. USB-interface single output-output of quick charge and direct charge,rated current of output:3.6V/3.4A,5V/2.4A, 9V/2A,12V/1.5A.The quick charge function is not supported when Type-C wire output +USB interface output are used simultaneously and the simultaneous output voltage is 5V/3.6A..
  • Output over current protection – The switch lite car charger is under protection when any single output voltage of Type-C wire or USB interface is 5V/9V/12V with load current over 3.5A/2.5A/2A. The switch car charger is under protection when simultaneous output voltage of Type-C wire or USBA interface is 5V with total load current over 5.5A..
  • Ultra-Compact – The car charger’s super-small design conserves space, allowing seamless access to the rest of your dashboard..
Check Stock

Raguso AC Current Transducer, Small Compact Simple Installation AC Current Transmitter Widely Applicable for Home for Industry for Indoor

  • High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
  • High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
  • Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
  • Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
  • Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..
Check Stock

Wireless Meat Thermometer, Bluetooth Meat Thermometer For Grilling Digital BBQ Cooking Thermometer with 6 Probes, APP/Timer/Alarm Monitor Food Thermometer for Smoker Barbecue Oven Kitchen Turkey

  • ????【6 Probes Simultaneous Monitoring 】- Have up to 6 different meats cooking process under your control synchronously, our bluetooth meat thermometer is equipped with 6 food grade stainless steel probes with long cables, extra clips to hold the probes to read your grill/oven/smoker. The probes stands up to 572°F for long time monitoring and with IPX7 waterproof standards..
  • ????【Stable Bluetooth Connection With APP Control】Easily get temperature readings on your phone via Bluetooth with a range of up to 200ft away, and you can also check it on the grilling thermometer controller. With the fantastic bluetooth capability and convenient app, totally freeing you from being attached to the side of the grill or oven, or limits you act in the kitchen, totally free your hands...
  • ????【Preset Temperature & Timer With Smart Alarm】- Pre-programmed temperatures and doneness levels for 11 types of food recommended by USDA and all the temps can be reset manually as you require.The current and the target temperature displays on APP of phone and the food thermometer simultaneously, no more overcooked or undercooked meats..
  • ????【Magnet On Back / Smart LCD Backlit Screen】- There is a strong magnet function in the back of this unique BBQ thermomete....
Check Stock

Efest 4213 LUC V6 LCD 6 Bay Multi-functional Charger

  • With 6 charging slots, compatible with and identifies Li-ion (10440, 14500, 14650, 16340, 16650, 17650, 17670, 17350, 18350, 18490, 18500, 18650, 26500, 26650) -Each slot has an independent monitoring and charging current function.
  • High quality LCD display Screen to display battery charging status..
  • With two optional charging modes (0.68A or 2A) that is easily changed using the Multi-function Button.
  • Charge up to 6 batteries using the 0.68A charging mode.Only Slot 3 and Slot 4 can charge at 2.0A.
  • The single slot maximum charging current is 2A, the maximum total charging current is 4A.
  • Features over-current, over-voltage, short-circuit, and reverse polarity protectionDescriptionWith 6 charging slots, compatible with and identifies Li-ion (10440, 14500, 14650, 16340, 16650, 17650, 17670, 17350, 18350, 18490, 18500, 18650, 26500, 26650). Each slot has an independent monitoring and charging current function.High quality LCD display Screen to display battery charging status. With two optional charging modes (0.68A or 2A) that is easily changed using the Multi-function Button .Charge up to 6 batteries using the 0.68A charging mode.Only Slot 3 and Slot 4 can charge at 2.0A .The single slot maximum charging current is 2A, the maximum total charging current is 4A.....
Check Stock