Categories

Best Single Balance Axle

Harken MR Single

  • Drill two 3/16" holes on each end of mounting strap at marks corresponding to bolt circle diameter of rear wheel axle.
  • Open single hole in support angles if necessary to fit axle studs or Bolts.
  • Cut and trim strap 3/8" beyond rivet holes on both ends.
  • To clean hubodometer face, use a Damp cloth to prevent scratches. Do not use solvents, paints or thinners.
Check Stock

Dayton 4Yx97 Load Wheel Assemblies with Bearings, Axles & Fasteners

  • Fits most hand trucks and other utility equipment. Compatible with nearly every hub length and bearing Size for tires measuring 10. 2" In diameter (labeled as 4. 10/3. 50-4")..
  • Features a load capacity of 300 pounds and a Sawtooth tread for the perfect balance of traction and maneuverability..
  • Comes with a 2. 25" Offset hub and bearings for a 5/8" Axle Pre-Installed. Includes an adapter kit to fit hub lengths up to four inches and an axle size of 3/4"..
  • Adapter Kit features: (1) 1/4" Spacers, (3) 1/2" Spacers, (2) 3/4" Bushings, (1) 5/8" Axle cap..
  • Tube type design makes fixing a flat as simple as installing and inflating a new Inner tube, instead of replacing the whole assembly..
Check Stock

Marathon 00210 Universal Fit, Flat Free, Hand Truck/All Purpose Utility Tire

  • Fits most hand trucks and other utility equipment. Compatible with nearly every hub length and bearing size for tires measuring 10.5″ in diameter (labeled as 4.10/3.50-4″).
  • Has the same feel and handling of an air-filled tire, but guaranteed to never go flat.
  • Features a load capacity of 250 pounds and a sawtooth tread for the perfect balance of traction and maneuverability.
  • Comes with a 2.25″ offset hub and bearings for a 5/8″ axle pre-installed. Includes an adapter kit to fit hub lengths up to four inches and an axle size of 3/4″.
  • Adapter kit features: (1) 1/4″ spacers, (3) 1/2″ spacers, (2) 3/4″ ball bearings, (1) 5/8″ axle cap.
Check Stock

Bent 1.5 Degree Pine Derby Axle with Easy Turn Screw Driver Slot – Polished Nickel Plated PRO Grooved Steering Axle 1 Axle

  • One single 1.5 degree pre bent pinewood derby polished axle to adjust pinewood derby car steering.
  • Convenient Easy Turn screw driver slot cut in the head to easily turn the axle without damaging it.
  • Exclusive nickel plated finish minimizes friction so your car is super fast.
  • Angled underside of axle head minimizes wheel/axle contact area.
  • Two grooves - Reduces friction and wheel wobble while providing a graphite store.
Check Stock

GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)

  • 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Check Stock

Wheel Master Front Bicycle Wheel 26 36 Spoke Steel Rim Bolt-on Axle Black

  • COMPATIBILITY: This front wheel is designed for 26" tires. It mounts using a bolt-on axle..
  • RIM: Single wall, steel, black, 25mm inner rim width, ISO 559. HUB: Steel. AXLE: 3/8", 110mm over locknut, bolt-on. SPOKES: 14 gauge, ED black steel, 36 count.
  • INCLUDES: Axle nuts. NOT COMPATIBLE with quick release skewers..
Check Stock

Archery 2021 Diamond Infinite 305 | Black | RH 7-70 LBS | Compound Bow Package | Draw Length 19-31' | Fully Adjustable

  • Maximum performance, ease of adjustability, engineered for any hunting situation.
  • Wide 16″ range designed to fit nearly anyone.
  • Integral stabilizer creates a perfect balance and a steadier shot.
  • DRAW LENGTH: 19-31″, DRAW WEIGHT: 7-70 LBS.
Check Stock

Kuryakyn 7202 Motorcycle Accent Accessory: Fork Skin Kit for 2004-17 Harley-Davidson Sportster Motorcycles with Single Disc Front End, Chrome

  • Fork skins specifically designed for the Harley-Davidson Sportsters.
  • Transform your front end for a fraction of the cost and look like a million bucks.
  • Chrome out 39mm front ends and provide the improved handling associated with fork brace to get that showroom ride.
  • Includes (1) chrome narrow fork brace, (2) chrome fork brace inner clamp half, (1) chrome left fork skin- (deep caliper cutout), (1) chrome right fork skin - (no cutout), (1) right axle cap - with black plastic axle cap carrier - without threads -'04-'07, (1) left axle cap - with black plastic axle cap carrier - threaded '04-'07, (1) round hole axle cap-'08 and later, (1) hex hole axle cap - '08 and later, (1) hardware kit.
  • suggested tools for installation (not included): set of hex wrenches, set of combination wrenches, clean rag, foot-pound torque wrench and hex wrench socket set.
  • Compatible with Harley-Davidson models: '04-'17 Sportster's with Single Disc Front End (excludes '11-'17 XL883L, '09-'17 XL883N, '11-'17 XL1200C, '16-'17 XL1200CX, '08-'12 XL1200N, '14-'17 XL1200T, '10-'17 XL1200X).
Check Stock

(4-Pack) Wheelbarrow Axle Bracket Set - 3.27-Inch Wide by 2.17-Inch Long Wheelbarrow Bracket - Complete Set Includes Bolts and Nuts - Compatible with 5/8 Inch Wheelbarrow Axles

  • 3.27-INCH WIDE BY 2.17-INCH LONG WHEELBARROW BRACKET - Exact dimensions are 3.27 inches from end to end of the mounting tabs, while the mounting holes are 2 1/8 inches apart from center to center.
  • COMPATIBLE WITH 5/8 INCH WHEELBARROW AXLES - These black wheelbarrow axle brackets are a universal fit for wheelbarrows with axles that are 5/8 inch in diameter. This is one of the most common axle sizes for wheelbarrows.
  • ONLY COMPATIBLE WITH SINGLE TIRE WHEELBARROWS - Part of the brackets’ design are the indentations on one end of the barrel. These indentations prevent the axle from sliding all the way through the bracket.
  • COMPLETE SET WHEELBARROW AXLE BRACKET - The 4-pack wheelbarrow axle bracket includes a complete set of the required bolts: length 29.62mm/1.17 inches and nuts. As this is a universal fit kit, the mounting holes may not align exactly with the existing holes on the wheelbarrow.
  • AFFORDABLE WHEELBARROW SPARE PARTS - Don’t just throw away your wheelbarrow just because of a simple defect. These 2 pairs of wheelbarrow axle brackets will ensure that you’ll always have a spare axle bracket on hand.
Check Stock

Archery 2021 Diamond Infinite 305 | Breakup Country | RH 7-70 LBS | Compound Bow Package | Draw Length 19-31' | Fully Adjustable

  • Maximum performance, ease of adjustability, engineered for any hunting situation.
  • Wide 16″ range designed to fit nearly anyone.
  • Integral stabilizer creates a perfect balance and a steadier shot.
  • DRAW LENGTH: 19-31″, DRAW WEIGHT: 7-70 LBS.
Check Stock

Marathon Universal Fit Pneumatic (Air Filled) Hand Truck / All Purpose Utility Tire on Wheel with Adapter Kit Included

  • Fits most hand trucks and other utility equipment. Compatible with nearly every hub length and bearing Size for tires measuring 10. 2" In diameter (labeled as 4. 10/3. 50-4")..
  • Features a load capacity of 300 pounds and a Sawtooth tread for the perfect balance of traction and maneuverability..
  • Comes with a 2. 25" Offset hub and bearings for a 5/8" Axle Pre-Installed. Includes an adapter kit to fit hub lengths up to four inches and an axle size of 3/4"..
  • Adapter Kit features: (1) 1/4" Spacers, (3) 1/2" Spacers, (2) 3/4" Bushings, (1) 5/8" Axle cap..
  • Tube type design makes fixing a flat as simple as installing and inflating a new Inner tube, instead of replacing the whole assembly..
Check Stock

BESTOOL Light Trailer RV Tire Leveler, Levelers Allows for Easy Leveling Without Blocks or Ramps, Fits Most 13 inch, 14 inch and 15 inch Wheels, Patented

  • Easy Leveling: BESTOOL RV wheel levelers allows easy leveling without blocks or ramps, Light trailer tire Leveler can be used with the single tire locking chock.
  • Raises Trailer Axle: RV Leveling Kit have solid construction,maximum Bearing up to 3000 lbs,raises an axle up to 8-inches when fully extended.
  • Adaptation Specifications : Fits most 13 inch, 14 inch and 15 inch wheels with up to a 28 inch tire diameter.
  • Compatibility: RV levelers designed for light, single axle trailers only, can be used to turn the drive screw, elevating or lowering the tire lifting pads to the level position.
  • Features: Adjustable baffle allow the RV tire trailer leveling to more accurately fit the tire and provide stability,corrosion-resistant finish for long life, must be used with industrial lubricants.
Check Stock

rolly toys John Deere Tipper Trailer with Rear Tipping for Pedal Tractor Youth Ages 3+

  • High Impact blow molded resin body Oversized resin wheels Single axle design Rear tipping Suitable for use on all rolly tractors.
  • Farm trailer is easily attachable as long as your attaching toy has some sort of hitch to connect the two toys.
  • Simplistic, single axle design enables stable and sturdy transportation.
  • weight Capacity of 50 lbs. Allows for safe transport of most loads.
  • Features rear tipping design to enable quick and easy dumping of loads as well as another option for loading.
Check Stock