Categories

Best Single Groove Pulleys

Preamer 5X 8x30x10mm Nylon Round Pulley U Groove Track Roller Bearing Pulley Wheel Double Shielde 608zz Bearing Inside

  • Deep groove ball bearings, fashionable, slide flexible, compression wear..
  • Suitable for furniture hardware accessories, mobile doors, glass sliding doors, aluminum doors and w.
  • It is made of high-quality nylon and plastic, with high durability, long service life, and can reduce vibration and noise..
  • This u groove pulley is widely used in doors and windows to track and drive mechanical equipment. There are total 5 pieces of pulleys in one set that you many use for many projects..
  • Product Size: 8mm(ID)*30mm(OD)*10mm(Thickness),U groove Size: 6mm(Width)*3mm(Depth)*324mm(diameter).
Check Stock

scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit

  • 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
  • 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
  • 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
  • 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
  • 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Check Stock

The Hillman Group 45198 1/2-Inch Stainless Steel External Retaining Ring, 12-Pack

  • Set Includes: 11 Sizes(Metric): 25mm, 28mm, 30mm, 32mm, 34mm, 35mm, 38mm, 40mm, 42mm, 45mm, 47mm.Totally: 88Pcs..
  • Material: Made of Carbon steel, Surface treatment: Blackening. providing good resistance to corrosion and high temperature..
  • Features: The spring metal clip features 3 prongs that give it an E shape which fits in a groove on the metal shaft assembly..
  • Application: These E-Clips are retaining rings that fit into a machined groove of a shaft to secure items..
  • Application: E-Clip Circlip uses for appliance repairs, bearing, gears, pulleys, and various repair projects..
Check Stock

OTC 6613 Variable Pin Spanner Wrench

  • OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

RONSTAN RF51100 Series 50 AP Block Universal Head Single Pulley, 3310 Lbs Load Capacity, 2\ Sheave

  • Pulleys for fibrous rope sizes 1/4" to 1/2"..
  • Series 50 all purpose pulleys are used in multiple industrial and OEM application that require an efficient and durable product.
  • Load ratings for these pulleys are exceptionally high for their size, starting at 1650lb for the all purpose single.
  • Becket pins are removable so lines can be spliced prior to fitting, and are ingeniously locked into position without the use of clevis pins, split rings or tools.
  • Shackles have slotted pins to avoid fouling lines.
Check Stock

PINGEUI 2 Packs 2 Inches H-Type Groove Wheel Pulley, 304 Stainless Steel H-Groove Track Wheel, Heavy Duty H-Type Groove Wheel, Max Load-Bearing Capacity 440 lbs

  • ...ial carts, racks, assembly fixtures, etc. It is widely used in factories, transportation sectors, construction sites, and more..
  • AFTER-SALES SERVICE - We hope you are satisfied with our products, which is why we provide you with a risk-free purchase. If you have any questions or dissatisfaction with our groove wheel pulleys, please feel free to contact us. We'll get back to you within 24 hours. This product comes with a 30-day money-back guarantee..
Check Stock

Variable Cylinder Spanner Wrench Set | 15Pc Adjustable Pin Spanner Wrench with Variable Spanner Wrench Pins

  • ◇ Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • ◇ Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • ◇ Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • ◇ The 12-inch (30.5cm) long small pin wrench Works with a 1/2 inch drive ratchet or breaker bar for an extended reach and added torque.
  • ◇ Durable steel material with manganese phosphate finish provides maximum strength and resistance to corrosion.
Check Stock

PINGEUI 2 Packs 2 Inches Groove Wheel Pulley, 304 Stainless Steel V-Groove Track Wheel, Heavy Duty V-Type Groove Wheel, Max Load-Bearing Capacity 440 lbs

  • ...ial carts, racks, assembly fixtures, etc. It is widely used in factories, transportation sectors, construction sites, and more..
  • AFTER-SALES SERVICE - We hope you are satisfied with our products, which is why we provide you with a risk-free purchase. If you have any questions or dissatisfaction with our groove wheel pulleys, please feel free to contact us. We'll get back to you within 24 hours. This product comes with a 30-day money-back guarantee..
Check Stock

Big Block Chevy Water Pump Pulley 396 427 454 V-Belt - Long Water Pump LWP BBC

  • Chevy Big Block Crankshaf Pulley - LWP, V-belt (396-427-454).
  • Made in the USA from 6061-T6 Billet Aluminum.
  • Works for both long and short water pump applications.
  • 2 Groove, 6.2" Diameter, 2.8" Overall Length.
  • Give Your Engine the Strong American Made Pulleys That It Deserves.
Check Stock

DASBET Variable Cylinder Spanner Wrench Set | 15Pc Adjustable Pin Spanner Wrench with Variable Spanner Wrench Pins

  • Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Wrench is adjustable from 1-1/4 inches to 5 inches (3.2 to 12.7cm) by loosening single adjustment bolt.
  • Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Works with Existing Tools : 12-inch (30.5cm) long pin wrench attaches to your 1/2-inch drive ratchet or breaker bar for an extended reach and added torque.
  • Blow Mold Case: The adjustable spanner wrench set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

  • Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • Product 2: High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

OTC 679 V-Belt Pulley Pulling Attachment for Pulleys up to 5-7/8\ in Diameter

  • Attachment clamps down into V-groove on pulley to distribute load.
  • allows you to safely remove stubborn pulleys without damaging them.
  • Use with Grip-O-Matic pullers or Push-Pullers.
  • Maximum spread is 5-7/8 inches and the minimum spread is 1-3/4 inches.
  • Use with OTC puller numbers 1035, 1036, 1037, 1038, and 927.
Check Stock

Belt Sander 1'' x 30''

  • (Hand Grinder to Sander) Simply Replace the Head Attachment of your Angle Grinder, you will get a handy belt sander..
  • (Easy Tube & Pipe Sanding) The Triangle Design of this Adapter allows you to sand the surface of a tube or pipe more easily and completely. Professional tool for removing metal rust..
  • (Precise Guide Pulley) The Design of the Guide Pulleys can make sure holding the belt tightly thus not going to sway and giving you a precise sanding work..
  • (Multi-Size Sanding Belt Applicable) Both 20mm and 40mm Sand Belts can be applied on this adapter for its double groove design..
  • (Material) Stainless Steel and Aluminum Alloy.
  • (Attachment Bearing) 5/8-11 US Thread Only.
  • (Notification) This product does NOT include a Grinder..
Check Stock