Categories

Best Single Head Bending Machine

Electric Hydraulic Pump Power Pack Unit 2 Stage Single Acting Electric Driven Hydraulic Pump Pedal Solenoid Valve Control equipments 2-70 Mpa

  • Electric hydraulic pump input voltage: 110V.Motor power: 0.75KW.Function: Single-acting, manual valve.
  • The pump can be used for a variety of hydraulic equipments..
  • Working mode: Pedal Solenoid valve Control.
  • Punching machine, bending machine, Jack split hydraulic products.
  • If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • Product 1: 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands..
  • Product 1: 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent..
  • Product 1: Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Product 1: Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the st....
Check Stock

BILITOOLS 3-Piece Hand Seamers Sheet Metal Bending Pliers Set Straight, 45° & 90° Metal Bender Tool

  • Three sizes of sheet metal bending pliers for your selection: straight jaw, 45 degree jaw, 90 degree jaw. These hand seamers are 2-3/8'' (60mm) wide..
  • Designed for bending or straightening sheet metal edge. Ideal tool for use on the car when it is not possible to use a bench folding machine or in tight areas..
  • Made of high quality, heat treated drop forged carbon steel, these tools are made with longevity and durability. Hardness approx. 30 to 35 HRC. Complete with a black finish with red dipped handles..
  • The pliers jaw close perfectly parallel and the edges of the pliers head are very straight—but they are not sharp. Sheet metal is not damaged when bending through the jaws of the pliers..
  • Please note: the metal benders may being a bit stiff to open/close at first, but they will start to loosen up after a while..
Check Stock

Dyson Ball Multi Floor Canister Vacuum, Yellow/Iron

  • Designed to clean across all floor types. Maximum Reach - 45 feet.
  • The only turbine head controlled at the handle. No bending down.
  • Hygienic bin emptying. Just push the button to release the dirt. Bin Volume - 0.53 gallons . Suction Power - 280AW.
  • Whole-machine HEPA filtration traps allergens and bacteria inside the machine.
  • Ball technology. Steers easily into difficult places. Washable lifetime filter - just wash and re-use.
Check Stock

Huanyu Electric Rebar Bender 900W Hydraulic Rebar Bending Machine 5/8Inch #5 16mm Rebar within 5s Bending Angle 0°-130° with Positioning Bolt Fast Easy Bending Rebar Steel Bar Steel Rod 110V RB-16

  • 【Powerful 900W Pure Copper Motor】Huanyu Electric Rebar Bender adopts 900W pure copper motor with strong power. It can bend 5/8inch (#5 16mm) rebar 0-130° within 5s. Low noise and low failure rate when running. Longer service life..
  • 【Solid Machine Body】Huanyu Rebar Bending Machine adopts sturdy cast iron body and high-strength bend block, stronger clamping force for excellent bending of rebar. Multiple screws fixed on the head enhance the safety and stability of the rebar bender..
  • 【Easy to Operate】One button operation. Keep the switch pressed and the bending block starts to push forward. Huanyu Steel Bender is equipped with an adjustable positioning bolt. You can mark on it to control the rebar bending angle. After the rebar is bent, pull the relief valve and piston returns to its original position..
  • 【Humanized Design】Ergonomically designed rear handle and side handle (detachable) for comfortable grip and easy operation. Integral workbench base design. You can lay the bender on a flat surface to operate. Stable and effortless. Save your back!.
  • 【Excellent Service】NOTE: We support customized service of 220V voltage to meet your needs.1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge....
Check Stock

O-Cedar EasyWring RinseClean Microfiber Spin Mop & Bucket Floor Cleaning System, Grey & Pet Pro Broom & Step-On Dustpan PowerCorner

  • ... JUST WATER: Our microfiber mops provide deep-cleaning solution for all your home and floor cleaning needs by effectively removing dirt, grime and 99% of bacteria with just water!.
  • Product 1: HANDS-FREE WRINGING: The foot-activated spinning wringer allows for hands-free wringing and controlled water release. No more bending over or wet hands!.
  • Product 1: MACHINE WASHABLE: The EasyWring RinseClean Microfiber Mop Head is machine-washable and reusable! We recommend replacing the mop head refill every 3 months for optimal floor cleaning results..
  • Product 2: CLEAN PET HAIR LIKE A PRO: Cleans 99% of dust, dirt, and hair in one sweep with V-shaped bristles for better floor contact while the angled broom head makes accessing corners a breeze.
  • Product 2: UNIQUE DOUBLE BRISTLE DESIGN: Features a unique double bristle design—firm black bristles do the heavy lifting, sweeping up larger debris, while the softer gray bristles snag dust and dirt effectively all while the bristles "remember" their shape by snapping back into place and resisting bending.
  • Product 2: STEP ON DUST PAN, REMOVE 3X HAIR: Our step-on dust pan's integrated cleaning combs allow you to remove three times more hair without using your hands.
  • Product 2: RELEASE HAIR INTO TRASH WITH TAP: The dust pan ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

Upside Down

  • ...REFILL = 3 MONTHS OF CLEANING: This offer includes 1 EasyWring Refill, and each EasyWring Microfiber Refill lasts up to 3 months! Save time and money with longer-lasting mop head replacements.
  • HANDLE EXTENDS FULLY TO 48 INCHES: With a telescopic handle that extends up to 48 inches, anyone can mop comfortably without bending over.
  • CLEAN BETTER WITH A MICROFIBER MOP: Our streak-free microfiber mops easily attracts and locks in dirt, dust, pet hair, grime, dried-on or sticky messes better than a traditional cotton wet mop. It can be used wet or dry for mopping or dusting.
Check Stock

O-Cedar EasyWring RinseClean Microfiber Spin Mop & Bucket Floor Cleaning System with 2 Extra Refills and Pet Pro Broom & Step-On Dustpan PowerCorner, Red

  • ... JUST WATER: Our microfiber mops provide deep-cleaning solution for all your home and floor cleaning needs by effectively removing dirt, grime and 99% of bacteria with just water!.
  • Product 1: HANDS-FREE WRINGING: The foot-activated spinning wringer allows for hands-free wringing and controlled water release. No more bending over or wet hands!.
  • Product 1: MACHINE WASHABLE: The EasyWring RinseClean Microfiber Mop Head is machine-washable and reusable! We recommend replacing the mop head refill every 3 months for optimal floor cleaning results..
  • Product 2: CLEAN PET HAIR LIKE A PRO: Cleans 99% of dust, dirt, and hair in one sweep with V-shaped bristles for better floor contact while the angled broom head makes accessing corners a breeze.
  • Product 2: UNIQUE DOUBLE BRISTLE DESIGN: Features a unique double bristle design—firm black bristles do the heavy lifting, sweeping up larger debris, while the softer gray bristles snag dust and dirt effectively all while the bristles "remember" their shape by snapping back into place and resisting bending.
  • Product 2: STEP ON DUST PAN, REMOVE 3X HAIR: Our step-on dust pan's integrated cleaning combs allow you to remove three times more hair without using your hands.
  • Product 2: RELEASE HAIR INTO TRASH WITH TAP: The dust pan ....
Check Stock

O-Cedar System Easy Wring Spin Mop & Bucket with 3 Extra Refills

  • ...4 REFILLS = 12 MONTHS OF CLEANING: This value pack contains 4 refills, and each EasyWring Microfiber Refill lasts up to 3 months! Save time and money with longer-lasting mop head replacements.
  • HANDLE EXTENDS FULLY TO 48 INCHES: With a telescopic handle that extends up to 48 inches, anyone can mop comfortably without bending over!.
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock