Categories

Best Single Pcb

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

Optical Laser Lens Head for Game Cube NGC Gamecube Replacement Repair Parts

  • Best ChoiceGreat replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • Compatible WithComplete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (2 PCB Board)..
  • Plug-and-Play UnitHigh Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • Easy to InstallSuper easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • Buy it Risk-FreeComes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

  • Pcb prototype board, the proto boards are in the color of Red.
  • Material: 94HB Bakelite Prototyping Board.
  • FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
  • PACKAGE CONTENT - 5pcs x Universal PCB Board.
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

Wii Disc Drive Replacement Original DVD Drive ROM Disc DIY Replacement Repair Part Assembly OEM Plug and Play Unit Compatible for Nintendo WII Game Console D2C D3-2 DMS D2A D2B D2E

  • 【Best Choice】Great replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • 【Compatible With】Complete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (Single PCB Board)..
  • 【Plug-and-Play Unit】High Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • 【Easy to Install】Super easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • 【Buy it Risk-Free】Comes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Donerton Wireless Earbuds Wireless 5.1 Headphones 140 Hours Playtime Earphones with Charging Case in Ear Headset IP7 Waterproof Earbud Noise Cancelling Microphone LCD Display for Sports/Working

  • Fashionable and Stylish Design: Donerton wireless earbud consist of high quality PC and ABS construction that ensures a comfortable tactility. The....
  • Up to 140 Hours Playtime: With a single charge for wireless headphones, you can listen for 5-6 hours. While the charging case extends to 140 hours,....
  • Premium Stereo Sound with Powerful Bass: I09 noise cancelling headphones adopt 6 mm composite diaphragm and HiFi driver, ultra-thin elastic diaphragm....
  • IP7 Waterproof: I09 wireless earphones are certificated with IP7 waterproof rating and nano-coating material, it can protects the headphones from....
  • PCB antenna and wireless 5.1: The integrated PCB antenna of the satellite standard combined with wireless 5.1 technology, ensures a stable wireless....
Check Stock

Phantom Electronic | Nixie Tube Clock Unique Led Gaming Table Desk Shelf Digital Flip Retro Steampunk Vintage Decor - Free USB Fan Included in The Set - Wood Effect 7 x 3.4 2.9 87135

  • (FREE GIFT) - USB Led Fan Clock, Included For Free!.
  • (LED IMITATED NIXIE TUBE CLOCK) - 6 RGB Glowing Pcb On The Bottom Could Be Customised In Any Color Sequence You Want. 10 Numbers Engraved In Each Pane....
  • (SIMPLE SETUP) - Note that before using, the clock needs to be setup first. The assemble process is easy and instruction book is included. No extra....
  • (7 MODES OF COLOR DISPLAY) - 16 Million Color Map in each PCB, you can easily adjust any color you want in each pane. There will be Check mode, Single....
  • (USB POWERED) - Equipped with micro USB power port. Can be easily powered by your phone charger, power bank or computer!.
Check Stock

Musical Paradise MP-301 MK3 Mini Tube Amplifier with Headphone Output Deluxe Version

  • Single Ended Class A 7W/Channel Tube Amplifier.
  • Supports 6L6 (6P3P), KT66, 5881, EL34, KT77, KT88 and 6550 (Plug & Play).
Check Stock

Arcade Fight Stick Street Fighter Arcade Joystick Keyboard control Fighting box PXN X8 For Nintendo Switch/PS4/PS3/XBOX Series X/S/XBOX S/X,PC

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Gardner Bender GSW-26 Electrical Door Switch, SPST, Normally On- Mom OFF, 16 A/125V AC, (Repl. for GSW-SK)

  • Tealio switches come in 1 variant. The spring weight is rated at "bottom out" force, not actuation! Our Tealio switches have been tweaked with wobble reduction and improved smoothness compared to regular Gateron linears..
  • 67g - Transparent, Light Teal-Blue Stem, PCB Mount [Linear].
  • Please note that PCB mounted switches can still be used in many plate mounted keyboards. As long as your PCB underneath has 2 extra holes next to the center post, it will support PCB Mounted switches and add extra rigidity to your build. If your PCB does not have the extra holes, then you can simply cut the small plastic legs off to make them Plate-Mount!.
Check Stock