Categories

Best Single Phase Clutch Motor

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

  • ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
  • 【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
  • Output voltage: 1 phase or 3 phase 220V AC ±15%.
  • 【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
  • 【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
  • 【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock

DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51

  • High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
  • Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
  • Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
  • Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
  • High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

Grizzly Industrial G0791-12" X 36" Combination Gunsmithing Lathe/Mill

  • Lathe motor: 2 HP, 220V, single-phase, 8.5A.
  • Mill motor: 3/4 HP, 220V, single-phase, 4.5A.
Check Stock

Grizzly Industrial G0958-8" Combo Planer/Jointer with Helical Cutterhead

  • Motor: 1.5 HP, 120V/240V, single-phase, 15A/7.5A, prewired 110V.
Check Stock

Mophorn 1 Hp Electric Motor 3450 RPM 11.2-5.6 A Single Phase Motor AC 115V 230V Air Compressor Motor 56C Frame Suit for Agricultural Machinery and General Equipment

  • Single Phase: The motor is 1HP single phase electric motor, features with 115/230V voltage and 11.2/5.6A full load amperage.
  • Fitted Frame and Shaft: With 56C frame, the electric motor also has 1.875 inch length and 0.625 inch diameter keyed shaft.
  • High Speed: The electric motor features 3450RPM rated speed and 3600RPM synchronous speed. High speed meets your different needs..
  • Fan Cooled: Our electric motor is TEFC (Totally Enclosed Fan-Cooled) motor. A built-in fan helps to dissipate heat and prevent the motor from overheating..
  • Universal Motor: Universal Motor- Universal used for the matching of water pumps, agricultural machinery and general equipment..
Check Stock

Grizzly Industrial G9743-7" x 12" 1-1/2 HP Gearhead Metal-Cutting Bandsaw

  • Motor: 1-1/4 HP, 220V, 3-phase, 1725 RPM, 4.8 Amps with single-phase inverter.
  • Required power source: 220V, single-phase, 60Hz.
Check Stock

Gear Motor with Speed Controller AC110V 6W Electric Single-Phase Motor 1500PRM Variable Speed Reduction Gear Reducer Motor with High Torque (Reduction Ratio: 1:50)

  • 【STABLE OPERATION】The 6W geared motor can reach the speed of 27RPM, thus ensuring stable operation. The motor has low noise, long service life and flexible installation..
  • 【SPEED CONTROLLER】The single-phase motor also has a reduction gear box and a governor. The governor has a large torque and a variety of optional speeds. You can adjust the speed according to different products to achieve the desired effect..
  • 【MAIN PARAMETER】Rated voltage: AC110 V.
  • 6W geared motor：88 * 60 * 50mm / 3.4 x 2.3 x 1.9in (Appr.).
  • Reducer size: 43 * 60 * 50mm / 1.7 x 2.3 x 1.9in (Appr.).
  • 【WIDE APPLICATION】The geared AC motor has a built-in precision stator and pure copper coil, which is stable, reliable and fast in heat dissipation. It is widely used in packaging, printing, textile, food, construction machinery and other industries..
  • 【GUARANTEE】We are committed to providing you with high-quality customer service, please tell us if you receive our product with any unpleasure, we will try our best to help you as soon as we could..
Check Stock

FDJ Minibike Go Kart Clutch 3/4 Bore 10 Tooth for #40/41/420 Chain

  • Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch.
  • 3/4" Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts.
  • 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall.
  • Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200.
  • Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4" Bar Shaft and 3/16" Key Way.
Check Stock

Cafurty 1N4007 DO-41 Axial Silastic Guard Junction Standard Rectifier Diode (Pack of 20)

  • ☞ Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
  • ☞ Max. Average Forward Rectified Current : 100A.
  • Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
  • package content: 1 x rectifier bridge 1 net weight: 130g.
  • package content: 1 x rectifier bridge radiator.
  • ☞ Applications: DC power supply for instrument equipment , Input of PWM frequence converter rectifying power supply , Excitation power supply for DC motor, Input of switch power supply and auxiliary current Inverter current..
Check Stock