Best Single Phase Power Meter
DC Motor Speed Controller AC 110V Input DC 24V-90V Output Motor Speed Controller Switch Electric Speed Regulator for Permanent Magnet DC Motor 400W DC-51
- High Precision:Motor speed controller 36V has small size, high precision, wide speed controlling range, low power consumption and long service life.
- Size: 11.2 × 10 × 6cm/4.4 × 3.9 × 2.3inch.
- Single Phase Controller:This DC motor speed controller 24V is only suitable for the motor below 1800rpm. A single-phase asynchronous motor speed controller and can be used for 24V, 36V, 90V DC motors. Input Voltage: AC 110V.
- Wide Application:Adjustable DC motor speed controller 90V can be widely used for speed governing device drivers of packaging, printing, electronics, instrument meter, clothing machinery, medical machinery and other industries.
- High Quality Circuit Board:This motor speed controller 24V uses high quality electronic circuit and integrated components, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
- Fast To Respond:DC motor speed controller is used with single-phase asynchronous motor to realize feedback constant speed and stepless speed regulation. It feels smooth and has good durability.
Check StockY&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel
- WVC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection).
- We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
- Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters.
- Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V.
- Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W.
Check StockAUTENS AC Digital Meter AC 80-260V 100A Current Voltage Power Energy Panel Monitor (AC 100A Meter with Split Core CT)
- ...t energy and preset power alarm limit. Short press the key to turn on or off the backlight. The backlight has memory function, it can store the on or off state when power off..
- LCD DIGITAL DISPLAY: Large-screen LCD with all sight 180° view. The blue backlight can be turned on/off manually. This AC meter is used for single-phase power with one hot line and one neutral line. If you want to measure the circuit with 2 hot lines, you will need 2 meters, one for each line..
Check Stock3 Phase Power Meter DTM024 Digital LCD Display Energy Meter Electric Kilowatt Hour Meter, 220/380V 5-80A
- WITH TRANSPARENT SHELL-- This power meter adopts transparent shell, which is convenient to observe the operation status of electronic components inside the meter..
- LCD DISPLAY WITH BACKLIGHT-- This energy meter is equipped with LCD backlight display is used to read data clearly, convenient to operate..
- LOW POWER CONSUMPTION-- The power consumption of the product is very low, saving money. The theoretical power consumption is less than or equal to 2 W..
- HIGH STABILITY-- The kilowatt hour meter has stable performance and can run steadily in the range of -20-55 degrees Celsius..
- APPLICATION-- 3 phase electric power meter can be widely used in power metering systems, standard: IEC62052-11 IEC62053-21..
Check StockY&H 600W Grid Tie Micro Inverter with WiFi Communication Waterproof MPPT Stackable DC30-60V Solar Input AC110V 220V Auto Pure Sine Wave Output for 30V 36V PV Panel
- Inverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments(Support single-phase or three-phase connection).
- The second-generation micro-inverter :The second-generation SG micro-inverter adds mobile phone communication function, Let you monitor the working status of your inverter anytime and anywhere.This Smart On Grid system improves safety.
- increases system reliability, and simplifies solar system design, installation, maintenance , and management..
- We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
- Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.(Voltage, current, active power, electrical energy, frequency, power factor)No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at lea....
Check StockPRINCE CASTLE Drive Motor Assembly 87-028AS
- ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
- 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
- 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
- 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
- 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check StockCafurty 1N4007 DO-41 Axial Silastic Guard Junction Standard Rectifier Diode (Pack of 20)
- ☞ Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
- ☞ Max. Average Forward Rectified Current : 100A.
- Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
- package content: 1 x rectifier bridge 1 net weight: 130g.
- package content: 1 x rectifier bridge radiator.
- ☞ Applications: DC power supply for instrument equipment , Input of PWM frequence converter rectifying power supply , Excitation power supply for DC motor, Input of switch power supply and auxiliary current Inverter current..
Check StockGenerac 6852 Home Link Upgradeable Transfer Switch Kit, 30 Amp
- 100-Amp 120/240 volt single phase Smart transfer switch is housed in a Steel NEMA/UL type 3R enclosure.
- Transfer switch connects through the utility meter for easy installation.
- smaller fuses integrated into the control board.
- Heavy duty Generac contactor is a UL recognized Device designed for years of service.
- The controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
- Can be used in Tandem with Generac's Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check StockElectric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A
- ...configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
- 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
- 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect the use of the security..
Check StockBAYM 10pcs/Box 5(32) A 120V 60HZ Single Phase Din Rail KWH Watt Hour Din-Rail Energy Meter LCD KWH 32A
- Measuring Energy Range:9999999.1kwh Counter :7+1 digits.
- Dimensions: 116*59*17.5mm=4.5*2.3*0.68 inch(H*D*W).
- Package included:1pc of Din rail single phase two wire energy meter & 1pc of User manual (English version).
Check StockGenerac RXSW200A3 200 AMP Smart Transfer Switch
- 150-Amp 120/240 volt single phase Smart transfer switch with service disconnect which is housed in an aluminum NEMA/UL type 3R enclosure with electrostatically applied and baked powder paint.
- Transfer switch connects through the utility meter for easy installation.
- Heavy duty Generac contactor is a UL recognized Device, designed for years of service, the controller at the generator handles all the timing, sensing, exercising functions and transfer commands.
- Can be used in Tandem with Generac Smart Management modules, up to 8 more loads can be managed as well, providing the most installation efficient power Management options available.
Check StockWAudio AC Noise Power Conditioner - Mains Purifier Audio Video Noise Filter Surge Protector with US Standard Sockets (Silver)
- 【HEAVY DUTY DESIGN】- Metal casin with thickness aluminum plates, come with 8pcs filtered outlets and 4pcs direct (non-filtered) outlets..
- 【OVERLOAD PROTECTION】- The sockets will be powered off when total current over 15A, press RESET button to restore power supply..
- 【PHASE DETECT】- Phase and the ground wire connection of AC source can be detected automatically. The indicator will be light when the phase is correct..
- 【VOLTAGE PROTECTION】- Its circuit detects dangerous voltage irregularities and provides the highest level of surge & spike protection. The voltage meter on the front panel helps you know whether the power voltage in the wall socket is stable..
- 【POWER CLEAN】- It ensures that all devices connected to W-5900 receive clean & filtered power, which reduces noise and ensures better sound and picture quality from amplifier, DJ equipment, home recording, projector, TV, computer, and other electronics..
Check Stock1Pcs Photocell Cap,TwistLock Photocell Shorting Cap,Photo Control Sensor Receptacle with Surge Protection,Dusk to Dawn 3 Prong Bypass Cap
- ◆ Function: phase sequence detection, live line check, simple performance check, live cable identification, phase loss assessment, search for cable break position, detection of DC line break point, line maintenance.
- ◆ Non-Contact Inspection: Non-contact inductive measurement of the terminal type without opening the cable, without touching the exposed high voltage fire cable, with the three highly insulated super inductive terminals inserted directly into the cable insulation skin 3-phase live detection for safe and quick productivity..
- ◆ Positive and Negative Phase: With the LED display, dynamic sound and light perfectly show the positive or negative phase of the phase sequence of the three-phase power supply, which can be seen at a glance..
- ◆ Magnetic base: The base plate of the instrument is equipped with 4 magnets that can stand a quality of 800 g. They can be attached to the metal case of the device during the test, and it is convenient and convenient to use..
- ◆ Wide Voltage Test: This phase meter can detect three-phase voltages from 70V to 1000V and has excellent performance..
Check Stock