NU1008 Cylindrical Roller Bearing 40x68x15 Cylindrical Bearings
- SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
- Metric unit measurements for industry consistency.
- Single row roller bearing for high radial loads with low friction.
- Removable inner ring in open bearing allows for lubrication in place.
- Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check StockSRC16 Sealmaster New Ball Bearing Cartridge Unit
- Cartridge block with ball bearing insert for use with cylindrical bore housings.
- Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
- Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
- Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
- Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check StockINA SL045014 Cylindrical Roller Bearing Double Row Fixed Normal Clearance Open End Oil Hole Metric 70mm ID 110mm OD 54mm Width 3600rpm Maximum Rotational Speed 61000lbf Static Load Capacity 38500lbf Dynamic Load Capacity
- INA cylindrical roller bearing with an open end ring suitable for high radial loads.
- CN (normal) radial clearance for applications where thermal expansion is not a factor.
- Double row roller bearing for higher radial loads than single row bearings.
- Open bearing for lubrication applied in place.
- Metric unit measurements for industry consistency.
Check StockTimken 19150 Differential Bearing
- INNER DIAMETER 1.5 INCH X OUTER DIAMETER 2.687 INCH X WIDTH 0.625 INCH.
Check StockINA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity
- INA cylindrical roller bearing with an open end ring suitable for high radial loads.
- CN (normal) radial clearance for applications where thermal expansion is not a factor.
- Double row roller bearing for higher radial loads than single row bearings.
- Open bearing for lubrication applied in place.
- Metric unit measurements for industry consistency.
Check StockRLS5ZZ Shielded Bearing 5/8 x 1 9/16 x 7/16 inch Ball Bearings
- Single-row, deep-groove ball bearing for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions.
- Small bearing for fitting small shaft diameters.
- Metal shields on both sides of the bearing keep the lubricant in and contaminants out.
- Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
- Normal radial internal clearance for applications where thermal expansion is not a factor.
Check StockAntrader 10Pcs 608 Steel Ball Bearing 8mm x 22mm x 7mm High Precision Rating Fidget Spinner Bearing
- 10pcs 608 Steel Ball Bearing, open type design unsealed ball bearing..
- High rotation speed with less coefficient of friction, less vibration and noise..
- 8mm x 22mm x 7mm Fidget Spinner Bearings. Inner Diameter: 8mm.
- These 608 deep groove ball bearing is a single-row bearing that supports radial loads, made with Chromium Steel providing superior quality and durability..
- Suitable to use in skateboards, longboards, inline skate, scooter, tri-spinner fidget toy hand spinner and more..
Check StockSKF NU 1010 ML - Cylindrical Roller Bearing - Straight Bore, 50 mm ID, 80 mm OD, 16 mm Width, C0 Internal Clearance
- Bearing steel long life bearing, smooth, low noise..
- Single row cylindrical roller bearings , please add lubricating oil or grease when using,Straight bore for fitting on a conventional cylindrical shaft.
- N206M NU206M NJ206M NF206M NUP206M (inner diameter = 30 mm, outer diameter = 62 mm, thickness = 16 mm)..
- Notice Notice Notice: Because RN206 has no bearing outer ring, so its outer diameter is not 62mm..
- Notice Notice Notice: Because RNU206 has no bearing inner ring, so its inner diameter is not 30mm..
Check StockNTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance
- INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
- CN (normal) radial clearance for applications where thermal expansion is not a factor.
- Single row roller bearing for high radial loads with low friction.
- Removable outer ring in open bearing allows for lubrication in place.
- Metric unit measurements for industry consistency.
Check StockMR52 ZZ Bearing ABEC-5 (10PCS) 2x5x2.5 mm Miniature MR52ZZ Ball Bearings L-520ZZ W52 for Fidget Spinners, Micro Motor, Office Equipment
- MR52ZZ (ID=2mm, OD=5mm, Thickness=2.5mm).
- Bearing made from Chrome Steel for durability and resistance.This type bearing is Miniature Single Row Deep Groove Ball Bearing,mainly take the radial load as well as moderate axial load..
- Bearing are fitted with two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance..
- Bearing Features: simple configuration,high speed,hight precision,less coefficient of friction,less vibration and noise,most widely used..
- Miniature Deep Groove Ball Bearing suitable for all kinds of industrial equipment, micro motor,small rotary motor,office equipment and so on..
Check StockSackorange 100 PCS 608 ZZ Skateboard Bearings, Double Shielded,8x22x7 Miniature Ball Bearings(Pack of 100)
- Single-row bearing for supporting radial loads.
- Shields on both sides of the bearing to keep lubricant in and contaminants out.
- Carbon steel for durability and resistance to deformity under heavy loads.
- 34,000 rpm limit with grease lubrication.
- Dimensions suitable for use in such applications as skateboards, inline skates, and scooters.
Check Stock
2Pcs 6000-2RS Bearings 10x26x8mm Ceramic Miniature Ball Bearing ZrO2 Deep Groove Race Ball Bearing
- 【Product Introduction】Bearing is an important mechanical basic part. Because of its excellent performance unmatched by metal bearings, high temperature resistance and super strength are leading the world in new materials..
- 【Features of Ceramic Bearings】1. Since ceramics are scarcely resistant to corrosion, ceramic rolling bearings are suitable for operation in harsh conditions full of corrosive media. 2. Because the density of ceramic rolling balls is lower than steel, and the weight is much lighter, the centrifugal effect of the outer ring can be reduced by 40% when rotating, and the service life is greatly extended..
- 【Specific Advantages of Ceramics】1. Ceramic is less affected by thermal expansion and contraction than steel, so when the bearing clearance is constant, the bearing can be allowed to work in an environment where the temperature difference changes drastically. 2. Since the elastic modulus of ceramic is higher than that of steel, it is not easy to deform when subjected to force, so it is conducive to improving the working speed and achieving higher accuracy..
- 【Broad scope of application】Widely used for medical apparatus and instruments, cryogenic engineering, optical instrument, high-speed machines, high-speed electric ....
Check Stockuxcell 20pcs MR52ZZ 2mmx5mmx2.5mm Double Shielded Miniature Deep Groove Ball Bearing
- MR52ZZ Miniature Single Row Deep Groove Ball Bearing..
- Bearing made from Chrome Steel(Gcr15) for durability and resistance..
- Two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance..
- Features: simple configuration,high speed,less coefficient of friction,less vibration and noise..
- Mainly take the radial load as well as moderate axial load..
Check Stock
