Categories

Best Single Servo Board

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

DIYmall 10pcs 10cm 3.93inch Male to Male JR Plug Servo Extension Lead Wire Cable 3Pin 100mm for RC Plane

  • 10CM Male to Male JR Plug Servo Extension Lead Wire Cable.
  • Great for jumping from board to board or just about anything else..
  • There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers..
  • Length:100mm Type:JR Plug Servo Extension wire (Male to Male).
Check Stock

SEEU. AGAIN 5pcs 25T Metal RC Servo Arm Horn Aluminum M3 Threads Steering for Savox Xcore Power HL HD Servo Motors

  • Type: 5pcs Black 25T Aluminum Servo Horn Arm, Ideal Servo Accessories for Hobby Projects DIY. Suitable for power HD servos..
  • Material: Made from high quality Aluminum alloy, CNC machined for high precision, anodized finish lasting performance. Hard construction, more durable in use..
  • Special Design: Single sided arm style with 3 predrilled starter holes, 2 threaded linkage holes for adjustable pull rod position, straight arm design for more accurate and powerful turn..
  • Each steering arm come with 2 fastening screw bolts for spline locking, to secure the split-clamp onto the servo motor output..
  • Fit for most standard and high torque servo motor, MG995, MG996R, MG946R, S3003 etc. RC Model Motor..
Check Stock

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

  • Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
  • This servo Y-cable allows you to control two servos with one radio channel..
  • Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
  • 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
  • Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock

Thrustmaster TX RW Leather Edition (XBOX Series X/S, XOne & PC)

  • Thrustmaster is offering, in a single, limited edition package, a set of incredibly precise racing controllers, favored by racers for their ability to deliver unrivalled immersion in the world of racing simulations for PC and for Xbox One, as the official license guarantees.
  • Hand-stitched leather wheel: Detachable / 11"/28 centimeter in diameter, hand-stitched leather.
  • TX SERVO BASE: Next-Gen 900° force feedback, Brushless servo motor, Dual-belt mechanism, H.E.A.R.T Technology.
  • T3PA 3-pedal pedal set: Fully adjustable, Conical Rubber Brake Mod included.
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

  • ✅The Juki DDL-8700 is a single-needle, straight stitch, industrial sewing machine. Manufactured by Juki, a world leader in sewing quality and technology, this machine is perfect for sewing light to medium weight fabrics (not intended for leather or other heavy materials)..
  • ✅Included accessories in the machine DDL-8700 head: : Bobbin Winder ___Thread Stand ___Machine Oil ___ Instruction Manual ___ Oil Pan ___Knee Lifter ___V Belt.
  • ✅Juki DDL-8700 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder O....
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

Robotic xArm 6DOF Full Metal Programmable Arm with Feedback of Servo Parameter Wireless/Wired Mouse Control Mobile Phone Programming

  • Robotic controller uses ARM core CPU, built-in Bluetooth,16M storage memory,single action group can hold 510 action. Better experience programming....
  • Support wireless handle and free Android/iOS APP.
  • Uses serial bus servo motor with feedback of angle, temperature and voltage, motor shaft lock protection, the LX-15D serial servo have extra long life.
  • Simple wiring design， plug and play Suction cup design.
Check Stock